Problem 3. to ingrow A sheet asphalt mixture is made using the following percentages by weight of the total mix. Materials Sand Filler Asphalt Cement Sp. Gr. 2.60 2.70 1.02 Percent by Weight 78 14 8 a) Compute the absolute sp. gr. of the compacted specimen. b) If the test specimen weighs 1130 grams in air and was found to weigh 635 grams when suspended in water, compute the bulk sp. gr. of the compacted specimen. c) Compute the porosity of the compacted specimen

Problem 3. to ingrow A sheet asphalt mixture is made using the following percentages by weight of the total mix. Materials Sand Filler Asphalt Cement Sp. Gr. 2.60 2.70 1.02 Percent by Weight 78 14 8 a) Compute the absolute sp. gr. of the compacted specimen. b) If the test specimen weighs 1130 grams in air and was found to weigh 635 grams when suspended in water, compute the bulk sp. gr. of the compacted specimen. c) Compute the porosity of the compacted specimen

Traffic and Highway Engineering

5th Edition

ISBN:9781305156241

Author:Garber, Nicholas J.

Publisher:Garber, Nicholas J.

Chapter18: Bituminous Materials

Section: Chapter Questions

Problem 12P

See similar textbooks

Similar questions

Given four different types of aggregates to be used to produce a blended aggregate for use in the manufacture of asphaltic concrete, determine the bulk specific gravity of the aggregate mix.
An aggregate blend is composed of 65% coarse aggregate by weight (SG 2.65), 30% fine aggregate (SG 2.70), and 5% filler (SG 2.75). The compacted specimen contains 6% asphalt binder (SG 105) by weight of total mix, and has a bulk densit of 2.255 Mg/m&3. Ignoring absorption.a. What is the percent voids fill with asphalt?b. What is the percent voids in mineral aggregates?c. What is the percent voids in total mix?
An asphalt concrete specimen has a mass in air of 1327.8 g, mass in water of 792.4 g, and saturated surface-dry mass of 1342.2 g. Calculate the bulk specific gravity of the specimen. a. What is the bulkspecific gravity of the compacted specimen (Gmb)?b. If the maximum theoretical specific gravity of the specimen (Gmm) is 2.531, what would be the air void content of the specimen in percent?
A compacted asphalt concrete specimen has the following propertiesAsphalt Content = 5% by total weight of the mixBulk specific gravity of the mix = 2.485Theoretical maximum specific gravity = 2.595Bulk specific gravity of the aggregate = 2.715Absorption = 1.5%Compute the percent's VTM, VMA, and VFA
As part of mix design, a laboratory-compacted cylindrical asphalt specimenis weighed for determination of bulk-specific gravity. The following numbersare obtained:Dry mass in air = 1264.7 gramsMass when submerged in water = 723.9 gMass of saturated surface dry (SSD) = 1271.9 ga. What is the bulk-specific gravity of the compacted specimen (Gmb)?b. If the maximum theoretical specific gravity of the specimen (Gmm) is2.531, what would be the air void content of the specimen in percent?
A compacted asphalt concrete specimen contains 5% asphalt binder (Sp. Gr. 1.023) by weight of total mix and aggregate with a specific gravity of 2.755. The bulk density of the specimen is 2.441 Mg/m3 Ignoring absorption, compute VTM, VMA, and VFA.
A compacted asphalt concrete specimen has the following properties: a. Asphalt content = 5% by total weight of the mix b. Bulk specific gravity of the mix = 2.485 c. Theoretical maximum specific gravity = 2.595 d. Bulk specific gravity of the aggregate = 2.715 e. Absorption = 1.5% Compute the percent’s VTM, VMA and VFA
An asphalt concrete mixture includes 94% aggregate by weight. The specific gravities of aggregate and asphalt are 2.65 and 1.0, respectively. If the bulk den-sity of the mix is 2355 kg/m3 , what is the percent voids in the total mix?
An aggregate blend is composed of 59% coarse aggregate by weight (Sp. Gr.2.635), 36% fine aggregate (Sp. Gr. 2.710), and 5% filler (Sp. Gr. 2.748). Thecompacted specimen contains 6% asphalt binder (Sp. Gr. 1.088) by weight oftotal mix and has a bulk density of 2305 kg/m3 . Ignoring absorption, computethe percent voids in total mix, percent voids in mineral aggregate, and thepercent voids filled with asphalt.
Table shows the grain size distribution for two aggregates and the specification limits for an asphalt concrete. Determine the blend proportion requiredto meet the specification and the gradations of the blend. On a semilog gradation graph, plot the gradations of aggregate A, aggregate B, the selected blend,and the specification limits.c
As part of mix design, a laboratory-compacted cylindrical asphalt specimen is weighed for determination of bulk-specific gravity. The following numbers are obtained:Dry mass in air = 1264.7 gramsMass when submerged in water = 723.9 gMass of saturated surface dry (SSD) = 1271.9 ga. What is the bulk-specific gravity of the compacted specimen (Gmb)?b. If the maximum theoretical specific gravity of the specimen (Gmm) is 2.531, what would be the air void content of the specimen in percent?
-For the concrete mixture design (oven dry) summarized in the tablebelow answer the following questions a) Determine the oven dry weight of the fine aggregate.b) Determine the coarse aggregate stock weight. c) Determine the amount of water ADDED/REMOVED by the coarse aggregate. d) The owner wants to replace 10% of the cement with TYPE F fly ash (Sp.gr = 2.50).What is the oven dry weight of the fine aggregate for this modified mixturedesign?