Week 5 Discussion

Case Study – The New Engineer   Jeff was just hired by GSI, Inc. to be their Environmental and Safety Coordinator.  This is Jeff's first position after completing his engineering degree.  He had taken a course in safety engineering as part of his studies and felt confident that he could handle the job.   Management at GSI, Inc. has assured him that they are committed to maintaining a safe workplace.  They have never had an individual dedicated to this task full-time.  They will implement his recommendations if he can justify them.   As Jeff begins to get familiar with the operations, he spends considerable time on the production floor.  He notices workers clean their tools before break with a liquid from an unmarked 55-gallon drum.  They also use this liquid to clean residue from their skin.  They use paper towels to dry their tools and hands, throw these towels in the trash, and head to the break room for a snack and/or smoke.   In talking with the workers, Jeff learns of some of…

Question 3 You are working on a design team at a small orthopaedic firm. Your team is starting to work on a lower limb (foot-ankle) prosthesis for individuals who have undergone foot amputation (bone resection at the distal tibia). You remember hearing about "osseointegration" in an exciting orthopaedic engineering class you attended at Clemson, so you plan to attach the foot prosthesis using a solid metal rod inserted into the distal tibia. You think stainless steel or titanium alloy might be a useful rod material. You decide to begin this problem by identifying typical tibial bone anatomy and mechanical behavior (as provided in the tables and image below). You assume the tibial bone can be modeled as a hollow cylinder of cortical bone, as represented in the image. You anticipate the length of the rod will be 1/2 the length of the tibia. Q3G: Critical Thinking: What would you propose to your team as the next step in this analysis? Is it reasonable to assume the rod will experience the…

Need help with this

SUBJECT - MACHINE SHOP & THEORY1. Identify the different hazards shown in the image. 2. List down the different hazards that you identified. 3. Explain the corrective measures to be done in each identified hazards in order to make safe your working environment   There are unsafe workplaces but none can be more unsafe than this one. Your goal is to find at least 22 unsafe acts and conditions in this image.  There are total 25 hazards but you need to identify just 22 to complete the activity.

Please solve the question on the sheet and get a clear picture and submit the picture. thankyou

Subject  :- Mechanical engineering

I need parts 8, 9, and 10 answered. Number 1 is an example of how it should be answered. NOTE: Read the instructions, no where does it say any drawing is required. It is really frustrating when I wait all this time for an answer to a question and some tutor does even read the instructions and just declines it...its ridicilous.

I need problems 6 and 7 solved.  I got it solved on 2 different occasions and it is not worded correctly. NOTE: Problem 1 is an example of how it should be answered. Below are 2 seperate links to same question asked and once again it was not answered correctly. 1. https://www.bartleby.com/questions-and-answers/it-vivch-print-reading-for-industry-228-class-date-name-review-activity-112-for-each-local-note-or-c/cadc3f7b-2c2f-4471-842b-5a84bf505857 2. https://www.bartleby.com/questions-and-answers/it-vivch-print-reading-for-industry-228-class-date-name-review-activity-112-for-each-local-note-or-c/bd5390f0-3eb6-41ff-81e2-8675809dfab1

I asked for problems 6 and 7 to be answered, but I did not get a properly structured answered as the example shows on problem number 1. Here is the link to the questions I already had answered, could you please rewrite the answer so its properly answered as the example shows (Problem 1)?   https://www.bartleby.com/questions-and-answers/it-vivch-print-reading-for-industry-228-class-date-name-review-activity-112-for-each-local-note-or-c/cadc3f7b-2c2f-4471-842b-5a84bf505857

LESSON: ZEROTH LAW OF THERMODYNAMICS AND TEMPERATURE MEASUREMENTMODIFIED TRUE or FALSE Directions: Write TRUE if the statement is correct, otherwise, change the underlined word/s or values to make the statement correct. Write your answer on the space provided before each item number. Statement: The Philippine one-peso coin has a diameter of 23.0 mm at 25 room temperature. Assume that the coin is made up of steel.14. The increase in coin’s diameter when placed in boiling water is 0.0207 mm.15. The final length of coin when placed in boiling water is 23.207 mm.16. If the coin is heated at 42 degrees Celsius, then the increase in diameter is 0.0207 mm.17. If the initial temperature is doubled, then the increase in coin’s diameter when placed in boiling water is 0.0414 mm.

I need answers to questions 7, 8, and 9 pertaining to the print provided. Note: A tutor keeps putting 1 question into 3 parts and wasted so many of my questions. Never had a issue before until now, please allow a different tutor to answer because I was told I am allowed 3 of these questions.

The class I'm taking is physics for scientists and engineers! **** I need help with part  D only*****  Can you please write out the solution and not type out the solution? I had to reask this question because the last tutor typed out the solution and it was very hard for me to follow . Please and thank you for the special request. I have attached the problem. Please view attachment before answering. Thank you!

Astronomy Question:  Read the questions slowly and answer with precise and long details about each of the questions. Answer correctly and follow my guidelines for a long and wonderful review after results. Your target/main observable galaxy is the whirlpool galaxy. Target: Whirlpool Galaxy Object Type: Galaxy Distance: 37 million light-years Constellation: Canes Venatici. DO NOT COPY AND PASTE OTHER WORK OR THINGS FROM THE INTERNET, use your own words.Provide refernces if used In 500 words, please explain the relevance of this object to the physics course material in university andits importance to astronomy. (Some question you may seek to answer are: What beyond the objectitself is learned by studying this class of objects? What sorts of telescopes and observations would beneeded for more detailed, broader reaching studies of this source and objects of its nature?)

I need help solving these 3 simple parts, if you can not answer all 3 parts then please leave it for another tutor, thank you.

Essay must contain at least 300 words

I need these two parts answered (Multiple Choice). If you can not answer all two parts please leave it for another tutor to answer. Thank you.   What size paper was used for the original version of this print? (Multiple Choice)ABCD The two views near the bottom of the print are called detail views. Which one of theviews above (left side, front, or right side) shows the same geometry, but at the normal 1:1scale? (Multiple Choice)a. left sideb. frontc. right side The major diameter (100 mm) of this part is interrupted by a flat surface on top. Is an auxiliary view required to show the true size and shape of that flat surface? (Multiple Choice)a. Yesb. No

Engineering Management : Please Read your Reference: www.bigrentz.com for your own. Topic is " Top 10 Construction Industry Trends To Watch For In 2022" Answer The following this. Make a reaction paper of the statement. In precisely five paragraphs, minimum of five sentences per paragraph, discuss your stand regarding the statement with at least 5 reliable references supporting your reaction. CONSTRUCTION Top 10 Construction Industry Trends To Watch For In 2022 By: BigRentz, Inc. on December 13, 2021 in 2022

Each bar chart should show the distribution of energy across the categories as well as the total energy for the initial- red and final- blue state.   The system includes 3 units of heat energy, and 2 units of radiant energy. All of the energy in the final state will be converted into mechanical energy.

Directions: Answer the questions after each situation. 1. David Aquino, engineering director, started out the day uptight. His young child had the flu the night before, and he had been up all night to help. Upon arrival at his office, David had to make urgent phone calls to approve a two-week overtime work plan due to a plant fire the night before and to plan for a product committee meeting the next day to counter environmental concerns about a wastewater treatment plant. Then he spent 30 minutes reviewing the qualifications of new candidates and decided on one. He asked for salary information and wanted to examine the offer before it was sent. He asked for further justification for the budget requested by industrial engineering for a minicomputer. Without reading it, he approved the research proposal from material engineering. He rejected an invitation to speak at a regional meeting of the Philippine Society of Mechanical Engineers by giving an untrue reason. David made a note for the…

This is an engineering problem and not a writing assignment. Please Do Not Reject. I had other engineering tutors on bartleby help me with problems similar to this one. This problem must be presented in a logical order showing the necessary steps used to arrive at an answer. Each homework problem should have the following items unless otherwise stated in the problem: a. Known: State briefly what is known about the problem. b. Schematic: Draw a schematic of the physical system or control volume. c. Assumptions: List all necessary assumptions used to complete the problem. d. Properties: Identify the source of property values not given to you in the problem. Most sources will be from a table in the textbook (i.e. Table A-4). e. Find: State what must be found. f. Analysis: Start your analysis with any necessary equations. Develop your analysis as completely as possible before inserting values and performing the calculations. Draw a box around your answers and include units and follow an…

I have two parts that need to be answered (Multiple Choice). If you can not answer both parts, please leave it for another tutor to answer. Thank you.   On the left side view of this print, there is a horizontal, straight-line segment that does not connect to other lines. In basic terms, explain why. (Multiple Choice)A: It represents a rounded edge and is there to help clarify the view, even though no sharp edge exists.B: It represents a straight edge that can't be seen in other views.C: It's a drafting mistake and should not be there.D: It represents a locating edge on the part and must be there to establish a primary plane for the inspection setup. This print does not show a cutting-plane line. Is this acceptable practice or an error? (Multiple Choice)A: AcceptableB: Error

Case Study: Paula’s Pain Paula has worked for Brindle Corporation for 3 years.  During this time, she has worked as a machine operator/cell leader in various work cells.  Recently, the plant went to mandatory 12-hour shifts and plans to remain on this schedule for several months. Paula’s present work cell is manufacturing 3-inch diameter exhaust tubes that are made from stainless steel.  These tubes get a hole punched in them, a flange welded on, and burrs ground off.  The pipe then gets placed into a gage to check that it was made correctly.  (The tubes weigh about six pounds.) Paula has been performing the welding operation.  She leans into the machine and loads the part into a fixture then positions the flange.  Both pieces are clamped (using hand clamps) into position and the machine is cycled by depressing two palm buttons. The gaging operation requires placing the finished part into the gage and clamping it (using hand clamps) into place. A pin is depressed to verify the position…

I need answers to questions 7, 8, and 9 pertaining to the print provided. Note: A tutor keeps putting 1 question into 3 parts and wasted so many of my questions. Never had a issue before until now, please allow a different tutor to answer because I was told I am allowed 3 of these questions.

SUBJECT COURSE: ERGONOMICS REQUIRED: CONCLUSION AND RECOMMENDATION FOR THE FOLLOWING SCENARIO: (should be 2 paragraphs with 7 sentences each) We carried out a lab experiment on the stroop test. According to the results of our analysis using Minitab ANOVA, there was no error made when we were carrying out the task. here are the objectives of the task: Students should be able to: 1. Understand how human brains process information. 2. Demonstrate compatibility and interference issues. 3. Determine how noise or interference affects perception.

I need these three parts answered (Multiple Choice). If you can not answer all three parts, please leave it for another tutor to answer. Thank you.   What size paper was used for the original version of this print? (Multiple Choice)ABCD The two views near the bottom of the print are called detail views. Which one of theviews above (left side, front, or right side) shows the same geometry, but at the normal 1:1scale? (Multiple Choice)a. left sideb. frontc. right side What size paper was used for the original version of this print? (Multiple Choice)ABCD The two views near the bottom of the print are called detail views. Which one of theviews above (left side, front, or right side) shows the same geometry, but at the normal 1:1scale? (Multiple Choice)a. left sideb. frontc. right side The major diameter (100 mm) of this part is interrupted by a flat surface on top. Is an auxiliary view required to show the true size and shape of that flat surface? (Multiple Choice)a. Yesb. No

Help!!! Please answer all Correctly!!! Please

1. HI CAN YOU HELP ME WITH MY ASSIGNMENT. PLEASE WRITE IT PROPERLY, DONT WRITE IT.      Faculty members and staff from ABC University had a meeting on how they will conduct the virtual flag ceremony every Monday. There are reported 12 faculty members, 3 office staff, 4 heads from the different courses and 1 student leader attended a secret meeting in a room which is 15 meters wide by 10.5 meters long and a ceiling of 3.87meters. The room is completely sealed off and insulated. Each persons gives off 150kcal per hour of heat and occupies a volume of 0.2 cubic meter. The room has an initial pressure of 14.696psi and temperature of 522.27 Rankine. • Calculate the room temperature after 15.5 minutes In Celcius • What is the mass of air in kilograms

Q1- Answer or complete the following questions using the information from your text book: (Story time) 1- Where are Bob and Basim going? 2- ( Bob/ Basim) is telling the story. (Choose) 3- How many unlucky things happen to Bob?

I want help with these questions

Note/I don't want it handwritten Develop a list of values that you think are important to being a successful engineer. This list will probably include things such as engineering knowledge andtechnical skills that are not ethical in nature. For the values that are ethical,think about where these values come from and how you came to hold them

A Team of Engineers asked for an internal combustion engine to use it in a designed car. Your role is to describe the operation sequence of different types of available engines, explain their mechanical efficiency, and deliver a detailed technical report to show your approach in solving and discussing the following tasks and issues.  You must follow the following steps to help the team:  STEP 1  Describe the operational sequence of four-stroke spark ignition and four-stroke compression ignition engines with the aid of sketches by constructing simple sketch representing the operation and plotting the P-V diagrams for each process during the cycle to show the following:  The input and output heat and net output work The air-fuel mixture intake and exhaust gasses The spark plug when it is in the active mode

A Team of Engineers asked for an internal combustion engine to use it in a designed car. Your role is to describe the operation sequence of different types of available engines, explain their mechanical efficiency, and deliver a detailed technical report to show your approach in solving and discussing the following tasks and issues.  You must follow the following steps to help the team:  STEP 1  Describe the operational sequence of four-stroke spark ignition and four-stroke compression ignition engines with the aid of sketches by constructing simple sketch representing the operation and plotting the P-V diagrams for each process during the cycle to show the following:  The input and output heat and net output work The expansion and compression strokes The air-fuel mixture intake and exhaust gasses The spark plug when it is in the active mode The complete cycle of ideal Otto and Diesel cycles that shows the input and output heat and net output work. STEP 2  Explain the mechanical…

I need answers for problems 13, 14, and 15 pertaining to the print provided.   NOTE: If you refuse to answers all 3 parts and insist on wasting my question by breaking down 1 simple question into 3 parts, then just leave it for someone else to answer. Thank you.

J 6