Absorbance Values Of Bromothymol Blue : Acid-Base Color Titrics

After the serial dilutions of the red and blue dyes were taken, the molarity and absorbance for both dyes were calculated. Using the MiVi = MfVf equation, the concentrations for each value of the red and blue dye were separately calculated. Calculating absorbances calls for setting the correct wavelengths of light for each dye. In this case, the 470 nm wavelength for red dye and the 635 nm wavelength for blue dye was needed to find the maximum absorbances. The absorbance was found by blanking the colorimeter and entering the concentrations. After both values of the absorbances and concentrations were found, the values were then graphed in order to obtain the equation of the relationship between absorbance and concentration.

An investigation to measure the percentage light transmission, using a colorimeter, through a solution, from pH 2 – pH 9, in which jelly cubes were immersed over a 24 hour period

3ml of sample was taken first flask at 4 minutes and added to the appropriate tube of sodium hydroxide, from the second flask at 4.5 minute and so on, each flask was sampled at 30 second intervals. The sampling was then repeated starting at 8,12,16 minutes. The final sample from the last flask was taken at 18.5 minutes. Once the sampling was completed, measurements of absorbance were obtained for solution in each tube at 405 nm.

The same solution of 0.5 ml BSA was then added from test tube 1 to the test tube 2 after being properly mixed, and from test tube 2 the solution was being added to test tube 3, and so forth all the way up to test tube 5, with the same exact procedure. From the last tube, we then disposed the 0.5 ml solution. After above procedures, we now labeled another test tube “blank”; 0.5 ml blank distilled water was purred into the tube with the serial dilution of 1:10. We also had a tube C labeled “unknown” with the same 0.5 ml of solution. And after adding 5ml of Coomassie Blue to each tube (1-5) and to the blank, the result of absorbance was read at 595 nm.

The isosbestic point of the acid (pH6) and basic forms (pH10) of para Nitrophenol (PNP) was expected at 350nm. As you can see in figure 2, the graph shows the intersection of 2 curves at ~350nm, which is matched with the literature value. Also, the pKa of PNP was expected 7.15 at room temperature. Refer to figure 3, the pKa is estimated to be 7.15-7.2, which very close to the literature value. In addition, the lab was succeeded in illustrating the use of a spectrophotometry to analyze concentrations of chemical substance. The absorbances of 2 unknowns were felt on the standard curve as the expectation (refer to table 4). The minimum absorbance of the known standards was 0.193 and the maximum is 1.830. The absorbance of the unknown

The Beers Law calibration experiment used many concentrations of crystal violet solutions. Each of these solutions were test and analyzed in order to determine the absorbance of each concentration The results were than graphed and produced a slope of 1.00E05 with an intercept of -2.21E-02.

Introduction: The goal or purpose of this experiment was to determine the concentration of Allura Red in red commercially available beverage- Gatorade. Colorimeter are used to shine a LED light through the solution and hit a photocell: it will detect an absorbance or a percent transmittance value. These “value” can be charted and examined as a calibration curve. Calibration curve is a method for determining a substance concentration in an unknown sample

MANUAL Q5: What color of light is being absorbed by the sample solution? How is that color related to the color of the solution?

The dark, navy blue colored graph represented the absorbance curve for the S1 sample. The red colored graph represented the absorbance curve for the S2 sample. The green colored graph represented the absorbance curve for the P1 sample. The purple colored graph represented the absorbance curve for the P2 sample. The gaps between the P2 curve was due to the oversaturation that led to the inconclusive spectrophotometer readings. The blue colored graph represented the absorbance curve for the P1 low salt sample. The orange colored graph represented the absorbance curve for the P2 low salt sample. The light blue colored graph represented the absorbance curve for the P1 medium salt sample. The light pink colored graph represented the absorbance curve for the P2 medium salt sample. The light green colored graph represented the absorbance curve for the P1 high salt sample. The light purple colored graph represented the absorbance curve for the P2 high salt

Figure 2 is a representation of the average saturation of each cuvette at a specific point time as a function. The y-axis shows the specific saturation points from figure 1, and the x-axis provides the different levels of pH. The pH scale provided on the x-axis ranges from 0 to 14, 0 being the most acidic and 14 being the most basic. The point chosen from figure 1 was the saturation levels of each cuvette at 110 seconds. The saturation point was chosen because in the previous graph at time 110 seconds the reactions of

When using different methods to measure pH levels there are some tools that can be useful. Some more than others but by putting into action the different methods it may determine which tools will work best and give the best results when testing the pH within a solution. The pH, which stands for the proportion of hydrogen ions in a solution, could be acidic (acidosis), neutral or basic (alkaline). The pH scale goes from numbers 1 through 14. A pH of 7 is neutral;

The absorbance is measured using a Plate reader and a Standard curve is generated. Also, the different types of pipetting techniques are assessed in this Assay.

By using acid-base titration, we determined the suitability of phenolphthalein and methyl red as acid base indicators. We found that the equivalence point of the titration of hydrochloric acid with sodium hydroxide was not within the ph range of phenolphthalein's color range. The titration of acetic acid with sodium hydroxide resulted in an equivalence point out of the range of methyl red. And the titration of ammonia with hydrochloric acid had an equivalence point that was also out of the range of phenolphthalein.. The methyl red indicator and the phenolphthalein indicator were unsuitable because their pH ranges for their color changes did not cover the equivalence points of the trials in which they were used. However, the

Before any calculations, the spectra from the HCl solution and NaOH solution was verified to make sure that the wavelength at which the deprotonated form of 2-naphthol absorbs at 345 nm and that protonated form does not absorb significantly at the same wavelength. All the spectra in Figure 1 were baseline-corrected using the HCl solution spectrum, shown in Figure 2, and the NaOH solution spectrum was used to determine Amax at 345 nm.

5mL is removed from this suspension and placed in a test tube. This is the centrifuged.