Aluminum Cubes Lab Report

2. Collect data: Click Slice. Choose a piece of Styrofoam and drag it onto the Material Investigation tray. Record the mass and volume, then calculate the density by dividing the mass by the volume. Replace the piece, and then repeat for the remaining pieces.

Determine the volume of the magnet and metal bolt to +/- 0.1 mL using units and sig figs carefully. Measure the mass and calculate the density of the magnet and metal bolt using the correct significant figures and units. Show work for full credit. (2 points)

Purpose: Weighing objects. Figuring out the density with an object by calculated volume and Archimedes’ Principle.

First, I will get my materials and set up the scale and 10 mL cylinder and refraction cell. I will check the size of the graduated cylinder to find out the volume. (LxHxW) That will equal 40.5mL for volume. I will see how much the cell weighs alone, and then I will 0 out the scale to see how much the water weighs. Then I will see how much the water and the cell weigh together. I will do this for the cell and cylinder. I will check to see if the density I calculated is what it is supposed to be at 1.00.

In this lab experiment our main focus was to get skillful in using tools such as the metric ruler, balances, thermometer, and graduated cylinder to capture measurements of length, mass, temperature and volume. Additionally, this lab helped us to become more familiar with the uncertainty of measurements, as well as becoming efficient with rounding our measurements to the correct numbers of significant figures. Our results are measured consistently with rounding to the closest answer we could possibly acquire as the data can tell you.

14. Calculate the volume of the magnet by multiplying the length × width × height, record in Data Table 5.

Then 8.0g of copper sulfate crystals were placed inside the beaker and the mass was recorded for the actual crystals. 50 mL of water was added to the beaker with the crystals. The ring stand was set up with the wire mesh on it and one partner should place the mixture in the beaker on it should be heated without letting the mixture boil. Stir the mixture and heat until the crystals are dissolved. While one partner does this, the other should obtain 1.5g of iron filings in a measuring cup and records the mass. Then the iron filings should be added small amounts at a time to the heated solution. Stir continuously until all the mixture is added to the beaker. Then it sat for 10 minutes and observations were recorded. Record the mass of a filter paper and set up a filtration apparatus with the filter paper in a funnel over an Erlenmeyer flask. Decant the liquid through the paper slowly trying not to allow any solid to get on the filter paper. Then with de-ionized water, rinse your solid in the beaker and let the solid settle then decant the liquid. Repeat the washing twice more and in the last time guide all the solid into the filter paper. Then place the filter paper on a watch glass and then into a warm oven to dry. After it is cool, record the mass of the watch glass, filter paper and solid. If there is not enough time to cool, you may have to do it the next

heavy duty samples as well as your dimensional measurements (length and width in cm) from Part III of this experiment, calculate the height, or thickness, of each sample of aluminum using the formula V l x w x h. In the formula, V stands for volume, l for length, w for width, and h for height. Once again, you will have to use your algebraic skills to manipulate the formula, to solve for height. You must show all your work. (15 pts)

Measure 500ml of tap water in the 500cm3 beaker, then measure 5g of sodium hydrogen carbonate using the 50cm3 beaker and weight scale and place in the beaker of water, using the glass rod to dissolve it into the mixture.

Introduction: Accuracy and precision were the major aspects of the lab. Accuracy is how close the average of the measured values are to the actual value. Precision is the closeness of repeated measurements. In the lab, the aim was to get as close as possible with both accuracy and precision when determining the mass and volume of the spheres. The mass was determined by weighing the spheres on the Analytical Scale and Triple Beam Balance Scale. The volume is determined by measuring with a ruler and by water displacement. The standard

2. In order to calculate the density of a solid or liquid sample, what measurements are needed?

With volume and mass determined, the density formula (d = m/V) was used to determine the densities of each rock and recorded in g/ml.

the Archimedes’ principle method? Why? The water displacement method is more accurate. The string used to suspend the object in the Archimedes’ Method could

12) Find and extract the remaining copper wire out of the mixture using forceps and rinse the copper wire with distilled water so that the water goes into the plastic container.

This purpose of this experiment is to calculate the thickness of a sheet of aluminum foil. This experiment is necessary because the human eye cannot accurately measure the small thickness of aluminum foil with only a ruler. However, to understand the procedure one needs to understand conversion, density, and volume. Conversion is when one converts one unit to another unit using a conversion factor(e.g. 2.54cm/in). Density is how much mass there is in a certain volume(density=mass/volume) and it stays constant in a substances and mixtures that have the same composition. Volume is the amount of space that an object occupies. The experiment will consist of weighing of aluminum foil, measuring the length and width, then converting these values