Assignment 306 moving and handling handout Essay

Health and safety requirements, safe working practiced and procedures required for the hand fitting activities untaken include always wearing your personal protective equipment. You should only use equipment which you have had correct training on or on equipment which you being supervised using, you should always use the correct procedures when using this equipment. Before using any equipment you should know what to do in an emergency situation, and should know where they emergency stops are on all the machinery which you will be using, you should also know where and how to use the guards on these

State why and when health and safety control equipment, identified by the principles of protection, should be used relating to types, purpose and limitations of each type, the work situation, occupational use and the general work

| State how the health and safety control equipment relevant to the work should be used in accordance with the given instructions.

The purpose of risk assessment is not to remove risks, but to take reasonable steps to reduce them. The process involves looking at the risk, and considering what can be done to make it less likely that the risk will develop into a reality. This can be done through implementing policies and codes of practice, acting in individual’s best interests, fostering culture of openness and support being consistent, maintaining professional boundaries and following systems for raising concerns.

As well as ensuring that the equipment meets the required safety standards, it should be age and ability appropriate to the people using it, and regularly checked to make sure that it is still in good repair, and fit for purpose.

During my training here in Northbrook College, I’ve learned that employers must provide a workplace where workers are not exposed to hazards in their workplace so they should provide adequate information to their employees regarding safety in manual handling by providing them trainings and supervision to workers so they can work in a safe manner. It is also taught that it is better if manual handling is done in collaborative approach where two or more people are involved in the procedure to reduce the risk of injury and make the load lighter as well. Some equipments like the hoist, turning blanket,wheelchair and the like are helpful to lessen the load and make things or person lighter and easier to carry, lift, and transfer

Legislations/codes of practice relating to general health and safety in a health or social care work setting are: The Health and Safety at Work Act 1974; Riddor 1995, COSHH (Control of Substances Hazardous to Health); Manual Handling operations regulations 1992; Health And Safety (First aid regulations 1981); Fire protection (Workplace) Regulations 1997; Food Safety Act 1990; Personal Protective Equipment and Management of Health and safety at work regulations 1999.

• Relate hazard to the appropriate manager, simple issues to a senior carer, dangerous issues to manager a.s.a.p.

Criteria 1.4: State why and when health and safety control equipment, identified by the principles of protection, should be used relating to types, purpose and limitations of each type, the work situation, occupational use and the general work environment, in relation to:

Risks assessments will identify any hazards and/or dangers and who might be harmed and how this may happen, allow the risks to be evaluated and check if the precautions are

| Explain why and when health and safety control equipment, identified by the principles of protection, should be used, relating to moving, handling and/or storing resources, and the types, purpose and limitations of each type, the work situation, occupational use and the general work environment, in relation to:

Assignment 1 The health and safety at work act of 1974 is important when working with hydraulic and pneumatic equipment as it protects employees and yourselves when working with the equipment in a workplace by ensuring that they are not putting their lives at risk in their place of work. This is done by ensuring people follow certain procedures and use equipment built for their safety. This safety equipment would be goggles, ear protectors, overalls and steel toe caps with hydraulic and pneumatic machinery. When using other machinery this equipment may vary.

The following sections were repealed and superseded by the Lifting Operations and Lifting Equipment Regulations 1998 on 5 December 1998:[18]

After introducing further control measures to reduce the high risk to a lower risk, I was left with several lower risks that could be minimised, but not eliminated, by further control measures. In effect when the new system have been installed, the risk assessment has been completed (the new system was installed to reduce the hazard of trapping and crushing of digits) and this has been recorded.

The Work Safe BC assessment tool will be used to measure the risk assessment. The report will also identify ways in which the associated risk with the task can be reduced. It will also incorporate the recommendations and re-perform the risk assessment to determine the effectiveness of the controls.