Cable Bridge Vs Truss Bridge

Suspension bridges were important before 1940 and are still important today. Major cities such as San Francisco, and Manhattan both have a suspension bridge. Suspension bridges are,” a bridge having a deck suspended from cables anchored at their extremities and usually raised on towers” (dictionary.com). Due to the fact that suspension bridges are not completely supported throughout the length of the bridge, past bridges were unsafe. For example, the Tacoma Narrows Bridge was a suspension bridge opened on July 1st, 1940 (Mark Ketchum). This bridge marked a huge point in suspension bridge safety and engineering, because in collapsed approximately four months after it was opened (Parsons). The collapse caused such a shock, that suspension

Calculations were performed to determine the effectiveness of the design of the platform. Allowing for a safety factor of 1.5 times the design weight of 10kg and considering the bridge must not be overdesigned; plans were made for the bridge to fail at 25kg, 2.5 times that of the design weight. According to the calculations, the bridge would hold a load of over 15kg and experience failure at 20kg in the members. These calculations were later disproven in the testing, breaking 8kg earlier than expected, due to unforseen errors. An analysis of the bridge design and calculations has been included at the end of this report.

Since the early days, the men try overcome environmental challenges and, in this process, ends up creating amazing masterpieces of engineering. Among this works, the bridges appears as the clearest representatives of how the mankind could adapt to Earth’s contours. If the shape of landscape can’t be changed, the bridges are the solution to link two places and allows the connection of the traffic to improve aspects such as the communication and the trade. Depending to the need, to the sources and to the environment, the bridge can be constructed in a specific configuration. There are five main sorts of bridges configurations. First, there is the simplest bridge, the beam bridge. Second, the arch bridge, one of the oldest kind. There are the truss, composed of set of trellises. Lastly, there are the cable-stayed and

The Pratt truss bridge was originally founded by Caleb and Thomas Pratt in 1844. It is mainly used to carry trains. The biggest advantage of this bridge was its low costs for construction and the materials to construct a truss bridge are minimal. It also use materials that is cheaper and light in weight. We can easily identify a pratt truss by detecting its diagonal members, which (excluding for the very end ones) all slant down and in toward the center of the span. The pratt truss was designed by applying few laws that related to the mechanics of materials concept. The bridge is mainly built using steel girders to support the construction of the structure. The below part of bridge weight is high so, it need an enough support to prevent from

Truss bridges have been around for a long time. I see truss bridges the most out of all the different types of bridges and to me it seems like the most popular type of bridge. In addition there are thirty different types of Truss bridges which means that there is a bigger variety of Truss Bridges instead of just having one type. Truss bridges have triangular shaped beams that go all across the bridge. The bridge also is above the roadway instead of under the roadway like the arch bridge. Truss bridges could also stretch very far. The longest cantilever Truss bridge that goes is called Crescent City Connection and it is 13,418 feet long with a width of 52 feet. There is also a really long Truss bridge that is near Hoboken, the name of the bridge

The purpose of this report is to introduce the roof truss that I had designed for the project of design studio 1 which is personal space. I have included the following content for the design: characteristics, cons and pros, sketch and label, and cross section of the design. The roof truss that I had design for the personal space building is king post truss (also known as crown post truss). According to online dictionary, the definition of king post is a structural member running vertically between the apex and base of triangular roof

Brick veneer and Double brick veneer buildings both use the same construction materials, but they’re both installed using different techniques;

The Principle upon which all trusses rely is that the triangle is the strongest and most rigid geometric Figure. By arranging the framework of triangles in patterns that varied from designer to designer, the structure acquired different appearances and served different purposes depending on the needs of bridge builders. The pony truss, the smallest type and ordinarily confined to lengths under 140 feet, with most under 100 feet, is distinguished by its low profile and absence of bracing above the roadway. The through truss by comparison is greater in length and height and consists of a tunnel-like structure that carries traffic through a system of overhead bracing which ties together the upper chords of the bridge.

The truss bridge I will focus on is Hampden Bridge, located in Wagga Wagga, New South Wales. Hampden Bridge is a wood Truss bridge that crosses the Murrumbidgee River in Wagga Wagga, New South Wales. This bridge opened to the public on 11 November 1895 and it was closed in October 1995 due to Wiradjuri Bridge opening. The bridge is 100.5 metres long, all of the 3 truss spans 33.5 metres. Hampden Bridge is the first large overhead-braced truss bridge made by Percy Allan. The bridge was originally designed to be a steel, but the tenders were too expensive. timber was used as the alternative. The Hampden bridge replaced the Wagga Wagga bridge,this bridge was made in 1892 and alos crossed the Murrumbidgee river. Percy Allan made the third of five standard wooden truss bridges. there is a clear difference of development between the pre Allan era and the post Allan era. Allan completely redesigned how timber truss bridges were made in NSW. He often based his bridge design on the American Howe bridge although he exploited the much stronger woods in Australia, to reduce the design its bare essentials, this is show in the differences between the two bridges before Allan made his and Allan’s bridges all around New South

The second bridge I will be talking about is the Batman Bridge. The Batman Bridge is a cable-stay bridge

The size limitations really affected our bridge design. We had to choose the weakest and thinnest woods to stay within the weight limit, and we chose long pieces of wood to reach across the 4 foot gap. We considered using many different materials for the bridge such as plywood, newspaper, Plexiglas and Lego, however we ended up using scarp wood from the class which we believe to be maple.

There are plenty of advantages to using trade show truss systems. Here is a list:

A truss includes straight individuals related at joints, for the most part termed board focuses. Trusses are made out of triangles in light of the key soundness of that shape and format. A triangle is the most direct geometric acknowledge that won't change shape when the lengths of the sides are settled. In examination, both the centers and the lengths of a four-sided figure should be settled for it to hold its shape. (Roylance, 2000, June 8)

This technical memorandum will discuss the option of replacing the US 212 bridge with a new bridge. We will discuss the design loads that will be used, as well as the different designs and sizes of possible bridges. The hydraulic and hydrologic analysis process will also be discussed. The time of construction and cost estimations of the bridge option will also be considered during the design process.

Because of advancements in today’s technology in construction field, many types of bridges are being constructed depending on the requirement and their suitability for the situations.