Essay on Communication Protocols and Network Devices

But how does it work? The internet, based on the concept of “packet switching”, involves the travelling of small packets of data over one or more networks (Frenzel, 2013). This can be compared to “electronic postcards”, meaning that “a computer generates a piece of data and flings it into the net, just like the postal system, except 100 million times faster” (Cerf, 2013). This concept allows one computer to speak to many different computers around the network by sending out these “electronic postcards”. However, before these networks can work seamlessly together, they must use a common protocol, or set of rules for transmitting and receiving these packets of data. There are several protocols currently in use, including the OSI Model, the TCP/IP Model, UDP, HTTP, and FDP (Mitchell, 2014), but the most commonly used is Transmission Control Protocol/Internet Protocol (TCP/IP) (Gilmer, 2011). Even as early as 1977, TCP/IP was being used by other networks to link to ARPANET (Kozierok,

TCP/IP is a protocol which transfers data across a network. It allows two different computers to communicate well even if they use different codes. Putting both computers into a new common code language which both computers

The fifth layer is the session layer this establishes a connection,this layer makes and sets up the connection using co ordinates and could terminate conversations links. the session layer produces services that make authentication after an interruption and not only that but it can reconnect.and as well as the transporting layer it can also have the TCP and the UDP can provide services for all most all applications.An application layer is an abstraction layer that specifies the shared protocols and interface methods used by hosts in a communications network. The application layer abstraction is used in both of the standard models of computer networking; the Internet Protocol Suite (TCP/IP) and the Open Systems Interconnection model (OSI model).Although both models use the same term for their respective highest level layer, the detailed definitions and purposes are different.In TCP/IP, the application layer contains the communications protocols and interface methods used in process-to-process communications

Internet Protocol version 4 (IPv4) IPv4 is a connectionless protocol for use on packet-switched networks. It is the fourth version of the Internet Protocol (IP), that is one of the core protocols of standards-based internetworking methods in the Internet. It was the first version deployed for production in the ARPANET in 1983. It still used to routing most Internet traffic today, eventhough we have the next version of it,IPv6.

The OSI (Open System Interconnection) model is a set of specifications that allow computers around the world to openly communicate. It is pivotal to understanding and developing computer to computer communications in a network. Each layer plays a role in the process of sending and receiving data. The application layer is the top layer (layer seven) it promotes communication between programs and lower-layer network services. The services at this layer allow the network to decipher a program's request and the program to decipher data sent from the network. The Application layer protocols, programs handles formatting, procedure, security, synchronization, and any other requirements with the network. The Presentation Layer (layer 6) acts as a translator. For instance these protocols decode the jpg/jpeg files sent within the Web server’s HTTP response. So, in the last step (the Application layer) we enter the Web address and it took us to the Web site. This step allows us to see the images and content of the site. The Session Layer (layer 5) regulates and controls the communication between two nodes on the network. It is an ongoing exchange of data between the two and keeps the connection between them for the duration. It keeps the communication secure, detects whether or not the communication has been cut off and if it has it determines where to restart the

Sockets is the form of communication (UDP and TCP) use the socket abstraction, which provides an endpoint for communication between processes to processes. Interprocess communication consists of transmitting a message between a socket in one process and a socket in another process. As the IP packets underlying UDP and TCP are sent to Internet addresses.

Transmission Control Protocol/Internet Protocol (TCP/IP) are the basic communication protocols, which were designed to provide low level support for internetworking. This term is generally also used to refer to a more generalised collection of protocols developed by the internet community and U.S. Department of Defence.

The internet layer is built up of four core protocols: IP, IGMP, ICMP and ARP. Internet protocol (IP) is responsible for routing, IP addressing and breakdown/reassembly of data packets, address resolution protocol (ARP) is responsible for mapping an IP address to a device on the local network, internet control message protocol (ICMP) provides diagnostic information and error reports on lost packets, internet group management protocol (IGMP) controls who receives IP datagrams in a single transmission. The transport layer is built up of two core protocols: TCP and UDP. Transmission control protocol (TCP) sequences and acknowledges packets sent and their recovery when lost in transmission allowing the computer to make and maintain network conversations where applications exchange data, defined as a connection-oriented protocol meaning the connection is maintained until the programs has finished exchanging data. User datagram protocol (UDP) This is used to transfer small amounts of data when the use of error correction isn’t needed increasing the speed of the transmission, common in multi-player video games as the user will not need to receive packets of past events in the game so the error correction featured in (TCP) would be

A communications protocol characterizes the guidelines for sending pieces of information starting with one hub in a system then onto the next hub. Conventions are regularly characterized in a layered way and give all or part of the administrations indicated by a layer of the OSI reference show. A convention characterizes the operation of the convention and may likewise propose how the convention ought to be actualized. It comprises of three sections:

In general, on the internet, every packet follows 5 layers of structures (Application, Transport, Network, Data Link, and Physical). Since I have to talk about Connection-Oriented and Connectionless as a service, I will focus on the Transport layer because they are part of this layer. It allows multiple applications to use one network connection simultaneously, the layer will create ports on your computer allowing them to be reserved and used by the Application layer. Let's say that port 3600 will be used to send a message to port 80 of some other computer, whenever the port is ready to send a message, it passed on to Transport layer. In this layer, it wraps the message inside the Segment which contains some additional

There are two types of Internet Protocol (IP) traffic, such as Transmission Control Protocol (TCP) and User Datagram Protocol (UDP). Some of the features that UDP possesses that are not provided by TCP/IP. First, UDP is a connectionless protocol (No handshake), which means packets sent from one node to another without making sure whether any packet may be lost during the transfer. TCP, on the other hand, makes sure to establish a connection in order to send the packets from one node to another without losing any packets. It is also known as handshake process, where nodes synchronize (SYN),

The transport layer: This layer determines how the packets are transported such as the order and what to do if there are errors. The purpose of this layer is to make sure the data be transported correctly. Besides, due to the limitation of physic (maximum IP packet size is 65535bits), the speed of transportation is limited. As a result, this layer needs break big data in to small packets. This can also collect small data into a big packet to reduce unnecessary transmission, which can improve the transmitting speed. Example protocols are TCP, UDP, SCTP.

The internet matured in the 1970's as a result of the Transmission Control Protocol/Internet Protocol (TCP/IP), which is sill used today. It was adopted by the U.S. Department of Defense in 1980, and universally adopted in 1983. The usage of TCP/IP is what unites all elements of the net. Both public domain and commercial implementations of the roughly one hundred protocols of the TCP/IP protocol suite became available in the 1980's. During the early 1990's, Open Systems Interconnection (OSI) protocol implementations also became available by the end of 1991, the Internet has grown to include some 5,000 networks in over three dozen countries, serving over 700,000 host computers used be over 4,000,000 people. By December 1996, about 627,000 Internet domain names had been registered and now there are more than 30 million registered.

The ability to send and receive data efficiently is the most important objective of networking computers.

Well-known communications protocols are Ethernet, a hardware and Link standard that is ubiquitous in local area networks, and the Internet Protocol Suite, which defines a set of protocols for internetworking, i.e. for data communication between multiple networks, as well as host-to-host data transfer, and application-specific data transmission formats.