Computer Assembly and Disassembly

1.) With all materials gathered, start by plugging the Power Supply Unit (PSU) into a free plug, making sure the PSU is switched to 6V.

The BIOS is at the start of the pc you can hit F10 on my pc it will bring BIOS up. In the BIOS menu if gives you options to give what order you would like hard drives of disk drives to boot up first when turning on your pc. It is also used to control the keyboard. This is a chip that is standard on all motherboards .

Problem 1 - Murphy pushes the power button on her computer and nothing happens. List all of the possibilities on how she would troubleshoot the problem. Don’t panic next think physical check and see If the cords are plugged in. Check connection to internet. Try restarting.

Step 4: Remove the plug by hand. Be prepared for the rush of hot oil!

3. Does your system have much room for adding new components? What types of expansion bus slots are available for adding new cards?

Motherboard: The motherboard is where many components such as the CPU, GPU, RAMetc.are connected. The motherboard does not hold any data itself. It also holds ports for input and output devices to be connected, such as a monitor, mouse, keyboard etc.

Motherboard: The motherboard has all the ports and slots where all the components will connect onto.

Your hard drives are what store all of your data, ranging from your operating system to your documents, music, and movies. If the RAM is your computer's short-term memory, your hard drive is the long-term memory. It stores the things you want to keep around for a while.

Turning on the ps4. External: I press the power to turn on the ps4. Internal: The power button is connected to the motherboard and the operating unit, which controls the setting of the console and its system.

After that, literally kicking the kickstand which located at left side bottom part of the body cover.

Motherboard is centralized computer of the PC that all framework inside the electronic in light of the fact that a few sections are not quite the same as each other like RAM, CPU and framework unit

The third section is about how to fix windows from locking up on boot up. The first step is to try to turn off the computer completely. When doing that you should at least wait about 5 minutes and then you can turn the computer back on. Then the second step is unplugged the cord that turns on the computer. When doing that you should count till thirty. After that you can turn the computer back on. Then the third step is to put the computer into safe mode. Safe mode is what helps fix the computer. In order to get safe mode you have to press the F8 button then it will boot up and go into the start up selection. When it does that press the safe mode. Once safe mode does its job then shutdown your computer and turn it back on again. This relates

Case Rosewill Thor V2 Gaming: The case can fit the size of the motherboard and has plenty of external drive bays, it also has a fan speed control knob to allow easy access to the cooling controls for the computer. Also is has a cleanable dust filter to prevent dust from getting inside the case. Lastly it has swinging top fins to allow for easier

1. Carefully remove the Motherboard, and place it on top of the anti-static bag it came in, and then place that on top of the box.

Next are the RAM modules. the ram count might be more than one but that's fine. if it's more than 1 you will have to configure it in the bios after the build is complete. okay, now just fit the ram in its own slot. it should be right beside the processor socket. Now your motherboard is all good to go in the case! lift up the motherboard and hover it over the case. there should be some screw holes that match up to the ones on the motherboard. Carefully lower it down and secure it with screws. Part 2 is complete! you are halfway there! next is to install the hard drive. on the back of the case, there should be a separate slot for the hard drive. it should have brackets that adjust to your hard drives' size. adjust it and pull out a SATA connection from the hard drive box. this should plug right into the base of the motherboard. next, we will have to route all the connections from the power supply and the connections from the case for the lights, power button, the USB ports and the case fans. the cabling in the case should come bundled. all you need to do is find the numbers on the cables and match them up to the motherboard. *The next part is if you have a graphics card. a graphics card isn't necessary unless you plan to do some heavy gaming. but if u do have one, you should line up the golden part under the graphics card to the one on the motherboard. keep pushing it in until you hear a click and it held on firmly. screw in the graphics card to keep it secure.