Driving Standard Research Paper

Over time cars may break down or get worn out. For an example, engines can give out, break, or fall apart. In addition, tires need to be changed every once in awhile when they wear out; oil needs to be changed or else it will destroy the engine. If people did not have mechanics how would they get around when their vehicles break down? To become an automobile mechanic, it is crucial to prepare through the appropriate schooling and training, to understand what the job itself entails, and to know the potential outlook for the job.

Doing my first experience of changing a tire it was not that easy as it sound because it took some strength and muscles to pick up the tire and exchange it for the spare. I had to have the knowledge about how to use the jack, jack handle, and lug nut wrench. I also had my parent there to help me and an owner’s manual to help. When I jumped a dead battery I made sure I use the positive cables then the negative to do it. I made sure I did not make to two cables touch each other because it may can a spark or cause the car to explode.

Begin by gathering the necessary tools and supplies. For tools, you’ll need: a metric or standard socket set and wrench (depends on the make of your vehicle), jack and jack stands, oil

Driving a stick shift vehicle is a dying art. Only 18 percent of Americans can drive a manual. If you do not know what a stick shift is, it’s a car with three pedals, gas, brake, and clutch and a stick shift which you use to change the gears manually. The first step of driving a manual is the hardest part, starting. Which seems simple but when you’re learning it is one heck of a challenge. First, you must give the car a little bit of gas by using your right foot and barely getting into the pedal. At the same time release the clutch slowly with your left foot. Once you have successfully doing that without killing the car you will be moving. After that its pretty simple. The only challenge is finding the next gear without grinding

Open the hood of your car, making sure the hood is propped up and secure. Locate the transmission fluid’s reservoir, which has a different location in each make and model of car. Use your owner’s manual, if necessary.

In this essay I will cover the key points on how to tune a car. Tuning a car consist of the regular maintenance you should preform every year or 15 thousand miles. This maintenance is crucial if you wish to keep your car running smoothly for as long as possible. To do this you will want to check all fluids, brakes, spark plugs, and filters, replacing anything that is low or bad. Also you will want to check the tires, steering components, and wheel bearings to make sure they do not need any repairs. Lights may also be burnt out, so check all of them including the signals.

2.The responsibilities of being a Automatic can big like rebuilding a transmission or small like changing the oil in the vehicle but all are important to keep the car on the road. Automatic can work

One way clutch is commonly used in the first gear. For example, place the gear shifter in drive position and give acceleration. The vehicle begins to move normally and when the acceleration is released the vehicle continues to move freely as if the vehicle is in neutral.

Next things I’ve learned were vehicle controls and devices. The turn signal lever is located on the instrument panel, behind the wheel on the left side. If the lever is up you turn right. If it is down, you turn left. The car has power door locks, automatic door lock, and rear door security locks. The hazard flashers are located in the front and rear turn signal lamps, which you use to warn the police and others that you have a problem. Inside,when you activate flashers, two green arrows appear on the instrument panel and start flashing with a clicking sound. Outside, when you activate hazard flashers, front and rear lights start blinking. The hood release is located under the steering wheel on the left, and to use it from the inside you should pull the release button. To unlatch the hood on my car pull the handle with hood release symbol under the instrument panel on the driver's seat. The light switch is located on the left side from the steering wheel. If you want to put on the high beam lights, switch exterior lamp

The very first time I drove a manual I had a lot of struggles. My parents explained to me over and over how to put the car in gear and slowly release the clutch and press on the gas at the same time to get the car rolling, but no matter how many times they said it, it just wouldn’t stick in my head and I just ended up killing the engine over and over. It took some time but after about an hour of having to constantly restart my car, I was not having as big of a headache from the car bucking like crazy, and I didn't have to worry as much about killing the engine or running over a child when I confuse the clutch with the brake.

You can do this by opening the hood of your vehicle and finding the cap to your transmission. Make sure you only open it when your vehicle is cool; the liquid inside your transmission can get very hot and could burn you if you open the cap when your engine is still hot.

Driving is exciting, you feel like you just want to jump in the car and start accelerating, but that’s not the way to go. If you have ever watched a plane being prepared for taking off, you’ll have seen the crew go through a whole series of safety checks, they can’t afford for anything to go wrong, and it’s the same when driving a car. Before driving, one must be certain that the vehicle is in a good condition before heading out on a road. There are many things to check, but the most important ones are the tiers, signal indicators and mirrors.

Steering a vehicle involves getting its front wheels to turn synchronously, either to the left or to the right. This is achieved with the help different gear systems. The two main types of steering gear systems are the rack and pinion, and the recirculating ball type; out of which

Some complex machines are very complicated. An automobile is one such machine. The engine contains many levers, wheels and axles, and pulleys. The whole engine is held together by threaded bolts, which are a form of inclined plane. The transmission uses gears, which are a form of wheel and axle with specially shaped teeth on the outside of the wheels. Two gears fit together and transfer force and power from one gear shaft to another. By choosing the size of the gears, the speed and direction of the rotation of the axles can be controlled.

The torque can tell a lot about how fast can actually accelerate. For example, if 500 newton meters is the toque that the tires experience, the mass of a typical car is 1500 kg, and the distance between the center of mass of the car and the wheels rotational axis is about 20 cm, the moment of inertia I about 60 kg. Therefore the acceleration of the car is 4.25 m/s^2, meaning it can go 0-60 mph in 6.3 seconds. (What does torque in a car do).