Fracking : Fracking And Fracking

Hydraulic fracturing is also known as “fracking” is a technique which involves drilling down, then horizontally as far as 10,000 feet below the surface to release natural gasses stored in the sedimentary rock known as Shale. The channel is then encased with concrete or occasionally steel to allow millions of gallons of water to be injected into the wellbore. Most water used in fracking comes from surface water sources such as rivers, lakes, or other accessible bodies of water nearby. Not only is there water being funneled into the wellbore, but also a mixture of sand and other chemicals. When the high-pressure mixture is injected underground it fractures the Shale around the wellbore and creates fissures. The fissures are then held open with

Fracking has become a highly controversial and publicized topic in recent years due to rising concerns into the potential benefits and consequences of using hydraulic fracturing to retrieve natural gas and oil reserves. With concerns over water pollution, mismanagement of toxic waste and irreversible environmental damage mounting, the practice of fracking has

In recent years, the subject of hydraulic fracturing, better known as fracking has been a constant subject of interest in the news media. The pros and cons of fracking are passionately debated. However, the public should become educated on the subject of fracking prior to choosing a side of the argument. In the scholarly article, “Super Fracking,” published in 2014, by Donald L. Trucotte, Eldridge M. Moores, and John B. Rundle, a detailed description of fracking is provided, followed by their analysis of current issues surrounding the controversy. According to Trucotte, Moores, and Rundle, fracking saves the consumer money. The wellhead cost to produce natural gas in January of 2000 was two dollars and sixty cents per one thousand cubic feet. At an alarming rate, the cost at the wellhead to produce natural gas had risen to eight dollars per one thousand cubic feet by January of 2006. Comfortingly, the wellhead cost dropped to two dollars and eighty-nine cents by the end of 2012. Impressively, gas production increase and price decrease over the time period are a result of fracking. In their article, Trucotte, Moores, and Rundle describe in great detail that hydraulic fracturing, most commonly referred to as fracking is the process of drilling down into the earth to fracture the layers of rock so that a high-pressure water mixture is directed at the rock to release the oil or natural gas inside. This method of fracking has been used commercially for the last fifty years.

Fracking is a shorter form of Hydraulic Fracturing which is the extraction process of both natural gas and oil. The process involves drilling deep into the Earth’s surface. Fractures are then created by “pumping large quantities of fluids at high pressure down a welfare and into the target rock formation” (EPA, 2016). After making these openings for the gas or oil to come up (known as “flowback”) the materials can be stored. The reason the fracking process occurs is because “more usual methods of extraction may not be able to fully reach the deposits of shale gas and oil” (2015).

In the process of fracking, the first step is to drill a hole deep into the earth vertically and then to drill horizontally and put in a steel pipe. According to EnergyFromShale.org, water, sand and other chemicals are fed down a thin pipe, or surface casing at high pressure to create cracks in the ground to release any trapped oil. A ton of water is used in this process. EnergyFromshale.com states that almost one-hundred percent of the materials used is water and part sand. According to dangersoffracking.com, one to eight million gallons of water are used for just one fracture per day. It is also stated that forty thousand gallons of chemicals are used to help the flow of the water. That is an immense amount of materials

Fracking consumes a lot of water with many chemicals and can’t be used again for purposes other than fracking, reducing the water supply. Companies originally extracted gas in a vertical position, but many are switching to lateral fracking; the latter of which consumes a significantly more amount of water

The greatest common concern on the subject today is water contamination. Individuals grew worried that the chemicals used to gather these natural resources will seep into the water and contaminate the United States. The water necessary to frack is gathered from rivers, lakes, ponds, and even aquifers. This is then combined with chemicals and pumped into the ground. Fracking was exempted from the Federal Safe Drinking Water Act and the chemicals used to frack are not tested frequently in our water (Lampe 34). Bordering on 20 to 40 percent of the water used to frack rises back up to the surface and is stored on site (Lampe 34). An

drilling process also uses various chemicals to extract the oil and natural gasses. Since fracking

Hydraulic Fracturing, or “Fracking,” was first developed and implemented in the 1950s under President Truman. The method of energy collection is constantly

That is more people who live in New York City and in Michigan. Drilling and extraction of natural gas are known to be seriously toxic to humans and animal. A few of the many chemicals are hydrochloric acid, benzene and formaldehyde. Which all have a serious effect for human health and wildlife. Fracking can cause birth defects, cancer, bloody noses, asthma, diarrhea, dizziness, migraines, nerve pain, and skin rashes. Fracking causes earthquakes more and more frequent and the cause is almost certainly fracking and the disposal of wastewater. The earthquakes caused by fracking have not caused much damage yet, but with a call for more drilling. Seismologists are learning more about faults no one knew existed. Fracking has contaminated lots of peoples water some people have complained to be able to light their water on fire because of large amount of methane gas. It has added to the problem of are air

When you look at the title of this paper you ask yourself, what is fracking, and you probably try to learn the definition so that you’ll actually understand what I am writing about. However, I am going to tell you what fracking is. What is fracking? Fracking is the injection of fluid into the ground in order to get natural fossil fuels to come to the surface, in order to use them for gas and other things (Fracking). How does fracking work? Water and sand are pushed into the ground horizontally and small explosives are inserted in order to push out oil and gas from the natural rocks that are there. Fracking has been going on for decades but there is a new type of fracking, deep fracking, that was first used in Texas in 1999 (MacDonald, 2004). There are good and bad effects of using fracking to get natural gas, many different things are effected on the Earth either way.

The beginnings of our modern day fracking process reside in a U.S. Patent No. 59,936, issued to a Col. Edward Roberts, in November of 1866, during the civil war. Robert’s idea, dubbed “Exploding Torpedo”, involved dropping artillery rounds down a well, filling it with water, to concentrate the concussion, thereby fracturing the surrounding rock, allowing for greater access to the gas or oil below. (Hicks, “See an Exploding Torpedo”). This process has improved greatly and the Environmental Protection Agency now refers to hydraulic fracking as the entire process, from the gathering of water used until waste disposal. What was once thought to be cost prohibitive is now more cost effective than ever.

Fracking is the process of drilling a well ten thousand feet into the ground and putting chemicals in water and shooting the high pressure water into the rockbed, which extracts the gases.

Some of the earliest “fracking” techniques can be traced back as early as the 1860’s (Carlson, 2011). These early techniques, used primarily in oil wells, used liquid nitroglycerin as a stimulant to break up shallow, hard rock wells that were located Pennsylvania, New York, Kentucky, and West Virginia. The use of nitroglycerin was extremely hazardous and often deemed illegal in many states; however, this “shooting” process was very successful. “Shooting” is a term used for injecting the nitroglycerin into the well to produce rubbished rock to increase both initial flow and the recovery of oil (Montgomery, 2010). Because of the success on oil wells, the similar principles were applied to gas and water wells.

Fracking is shorthand for hydraulic fracturing, a type of drilling that has been used commercially for 65 years. Today, the combination of advanced hydraulic fracturing and horizontal drilling, employing cutting-edge technologies, is mostly responsible for surging U.S. oil and natural gas production. Hydraulic fracturing involves safely tapping shale and other tight-rock formations by drilling a mile or more below the surface before gradually turning horizontal and continuing several thousand feet more. Thus, a single surface site can accommodate a number of wells. Once the well is drilled, cased and cemented, small perforations are made in the horizontal portion of the well pipe, through which a typical mixture of water , sand and additives is pumped at high pressure to create micro-fractures in the rock that are held open by the grains of sand. Additives play a number of roles, including helping to reduce friction (thereby reducing the amount of pumping pressure from diesel-powered sources, which reduces air emissions) and prevent pipe corrosion, which in turn help protect