Hazard Identification, Risk Assessment and Control

Employers, managers and supervisors should all ensure that workplace practices reflect the risk assessment and safety statement. Behavior, the way in which everyone works, must reflect the safe working practices laid down in these documents. Supervisory checks and audits should be carried out to determine how well the aims set down are being achieved. Corrective action should be taken when required. Additionally, if a workplace is provided for use by others. The safety statement must also set out the safe work practices that are relevant to them. Hence, it is

The main features of the Health and Safety at Work Act (1974) is that it requires certain health and safety procedures to be maintained in a health and social care setting, for example, the act explains that there must be, safe operation and maintenance of working equipment, plant and system, maintenance of safe access to the workplace, safe use, handling and storage of dangerous/hazardous substances, training of staff to ensure that there is health and safety, to provide welfare for staff at work.

Changing circumstances within the workplace can cause hazards because other workers can be put at risk because they haven’t been made aware of the changes and management needs to be informed. Risk assessment is a method put in place that is suitable and sufficient to control the risk to health and safety to both employees and other persons who may be affected.

Under this act, employers are responsible for reporting certain types of incidents, accidents or illnesses to the Health and Safety Exectutive, or the local authority.

Workplace (Health, Safety and Welfare) Regulations – this is to ensure that the conditions of the workplace are safe to work in. For example, cleanliness. The workplace must be kept clean with no waste. (Management of Health and Safety at Work Regulations).

health and safety procedures and practises should be under continual scrutiny and areas for improvement should be monitored and dealt with. A good method of monitoring & improving are health, safety and security procedures are visually. Check visitors have signed in the visitor’s book, look for items blocking fire exits or hallways, wet signs are in place during cleaning, COSHH cupboards are kept locked, medication trolleys are secure, hoists are clean and stored in a correct storage place. Policies and procedures need to be reviewed regularly to ensure they are still relevant, circumstances in workplace can change and new risk assessments will need to be put in place or old ones reviewed. Policies and procedures may need evaluating and developing

Records and statistics will be evaluated by inspection and investigation reports, workers orientations logs, equipment and logbooks, emergency response plans (drills, enforced safety, first aid), supervisory notes, and safety contacts (past and present) The reasoning to evaluate these areas is to ensure due diligence. This ensures the employer is taking responsibility for workers and strives to conserve a safe working environment.

Criteria 1.4: State why and when health and safety control equipment, identified by the principles of protection, should be used relating to types, purpose and limitations of each type, the work situation, occupational use and the general work environment, in relation to:

Reporting of Injuries,Diseases and dangerous occurrences regulations of 1995 requires the reporting of work-related accidents, diseases and dangerous occurrences. The Act applies to all work related activities, but not to all work related incidents. The objective of the regulations is to enable the enforcing authorities to identify where and how risks arise and to investigate serious accidents so as to prevent them from occurring in the future and thus providing a safer work environment. The enforcing authorities can then help and advise you on preventive action to reduce injury, ill health and accidental loss,the main points of our own policy that relate to this are:

The framework which we work to within the home for health, safety and risk management are based around the Health and Safety at work act 1974. Within this act it states that we need to follow the health and safety policies which as a company we have and also risk assessments. The HSE states that there are several things we must follow, this includes:

The aim of workplace risk assessments is to identify hazards, evaluate the degree of risk and to put into place control measures to minimise the risk. If the staff team is not involved in the process then they may have little awareness of the hazards and the actions required of them to minimise the risks. This is at odds with the requirements of the Health and Safety at Work Act 1974. A risk assessment

Health & Safety At Work Etc. Act 1974 (HASAWA)Employers have a general duty to ensure the health, safety and welfare at work of all employees so far as is reasonably practicable.Management of Health & Safety at Work Regulations 1999Employers have a legal duty to carry out risk assessments as the first step in ensuring a safe and healthy workplace. * A written record must be kept if there are 5 or more employees. * Preventive and protective measures must be

The SHWW Act 2005 Section 19 obliged that employers must identify all workplace hazards, own and review risk assessment, and implement measures or improvements according to recommendation in risk assessment.

Task 4Ensuring health and safety is an important responsibility not only for the Managers but all associated with the premises. Evaluate your organisation’s health and safety policy and procedures in line with legislative requirements and propose recommendations on how health and safety should be managed

An assessment of the risks to health arising from the use of hazardous substances at work and deciding what precautions are needed,