Hazards Associated With The Hazards

resulting risks to employees and any other person who may be affected by work activities.

All employees of Robinson’s Excavation are valued members of the organization which is why safety must always come first. The construction industry is traditionally a hazardous work environment, but with vigilance, dedication, and training, the dangers can be significantly reduced. In order to provide the employees of Robinson’s Excavation with a safe work environment, all employees, regardless of status, are required to follow and enforce all safety procedures, which are not all inclusive. Additionally, the following protocol is in compliance with all state and federal OHSA regulations.

The survey identified hazards to emanate from the following areas. The paint shop where chemical exposures were high as a result of the fumes generated when painting cars. It was identified that paint fumes are very toxic and could result in chronic medical conditions when employees are not well protected. The body shop was the second area that was identified for hazards. There were numerous machinery and many tools of work that were heavy, sharp, and dangerous. Especially the vehicle lifts, car rampsand, and other socialized tools. These presented possible injuries resulting from collusions and falling objects. The body workshop was a

At the same time, however, many of the companies employing the workers had full knowledge that asbestos was dangerous and that exposure to asbestos would harm the health of many of the workers. Insulators, plasterers, electricians, pipe fitters, mechanics, iron workers, ship builders, ship workers, brick layers, carpenters, and other tradesmen are just a few examples of workers that were likely to work with asbestos on a day-to-day basis. Also at risk are the families of these workers, as the asbestos fibers may be brought into the home from the clothes, skin, or hair of the worker.

According to OSHA, lack of fall protection is the most frequency cited violation. For example, construction sites notoriously fail to provide adequate fall protection systems. As a result, this is the leading cause of worker fatalities in the construction industry. On the other hand, any company that requires employees to work on surfaces above six feet will be required to provide adequate guardrail and personal fall protection systems. For example, a regular office-based business that requires maintenance personnel to fix roofing problems will be required to follow federal fall protection standards.

This paper examines the implication to establish measures that provide safety and health directives concerning areas involving painting operations, gas and electric welding, cutting, brazing, or equivalent conflagration or spark generating operations towards safeguarding personnel and property in contrast to heat, developed gases and fumes, electrical shock, and radiation meant for all personnel responsible for ground work, managing, and accompanying painting, welding and cutting operations (Mroszczyk, 2012).

A prime concern for the DFA Acton Quarry is the safety and well-being of the workforce and those who come into contact with the mine and the processing facilities. Aggregates Consulting Ltd. supports a zero tolerance approach to workplace injuries and fatalities, but extends the approach to environmental and social awareness [17].

2014-2015 UK Statistics show falling from ladders and extension ladders was a common cause of death in the workplace. In fact, around thirty percent of workplace deaths were caused by falling from a height.Recent studies show a total of twenty-nine workers in the past two years, were killed by falling. It appears, working from heights is one of the leading causes of death in the workplace for three consecutive years.

b. Welders often work around and with flammable and combustible liquids, compressed gases, and asbestos; these are also known as hazards that can cause harm to a welder (CCOHS, 2015). Welders still exist has an

The regulations declare that a person should always refrain from working at heights if a different method can be used to help maintain safety. An example of this would be when cleaning first floor windows of a building, a specialist pole can be used. If the building is new, the design of it can be changed to install tilt and turn windows meaning both sides of the windows can be cleaned from the inside which will lower the risk of fatalities due to heights.

Along with construction workers, other tradesman use ladders too. Anyone who is required to use a ladder in the course of their work needs to be able to reach their work zone safely without worrying about injury from negligence or employer

Write down a conversation you could have with your employer, raising the issue of this hazard and how it could be addressed on the worksite. You must include ideas of possible solutions to the hazard.

Construction workers come into contact with situations that often deal with electricity. Sadly, approximately 400 people die each year due to exposure to electricity at high voltages. Electrocution and electrical shock are serious risks that many workers face when they work in or around construction sites. The person doesn't have to be a construction worker to be exposed to risky situations either. Anyone who works around power lines or has metal equipment around power sources is at risk.

Design errors can cause several catastrophic accidents that could result in the death or injury of workers.

In the United States, construction has always been one of the most dangerous industries to work in. The number of fatalities that occur in this industry year after year demonstrate this. In 2014, 19.6% of worker fatalities, in private industry, were in construction (Bureau of Labor Statistics, 2015) despite the industry comprising only 6.8% of the total work force. This epidemic is not unique to the United States. Essentially every country faces similar problems regarding construction safety. For example, in 2004 the Australian construction industry employed approximately 8% of the countries workforce. However, workers compensation statistics indicated that the industry’s incidence rate was 28.6 per 1000 employees,