Hydraulic Fracturing Pros And Cons

Hydraulic fracturing is also known as “fracking” is a technique which involves drilling down, then horizontally as far as 10,000 feet below the surface to release natural gasses stored in the sedimentary rock known as Shale. The channel is then encased with concrete or occasionally steel to allow millions of gallons of water to be injected into the wellbore. Most water used in fracking comes from surface water sources such as rivers, lakes, or other accessible bodies of water nearby. Not only is there water being funneled into the wellbore, but also a mixture of sand and other chemicals. When the high-pressure mixture is injected underground it fractures the Shale around the wellbore and creates fissures. The fissures are then held open with

Hydraulic fracturing also called fracking has been around for many years despite the recent events of controversy to continue fracturing or not. With the earth’s resources depleting rapidly every year and no sufficient replacement for energy humanity needs fracking. The process of fracking has been around for more than six decades. Fracking has been around since the 1940s and was created to increase the removal flow of oil and natural gas. In the words of chemical engineer Robert Rapier “Fracking involves pumping water, chemicals, and a proppant down an oil or gas well under high pressure to break open channels in the rock holding the oil or gas (Rapier).” A proppant can be different materials,

Hydraulic fracturing or “fracking” is an oil and gas drilling process that is used to extract oil and natural gas from deep underground. Fracking is the cheapest route for oil and gas companies to make billions of dollars. The majority of the time the cheapest way is not always the best way of doing things. Hydraulic fracturing is not a good thing just because it makes money for--at times--everyone involved, as it causes our air and water to be polluted. There should be more regulations and laws to prevent contamination and protect our air and water from fracking pollution.

Hydraulic fracturing, also known as fracking, is a process the the oil and gas industry uses to extract natural gas and oil from shale rock formations buried deep within the Earth. Fracking is done in order to recover oil and natural gas from formations and areas that scientists didn’t think were possible to produce. It is also used for the extraction of oil and natural gas from older wells in more mature oil and natural gas fields. Many people don’t know about the many harmful effects to people and the environment because of fracking. Hydraulic fracturing is harmful to the environment and people because it contaminates drinking water, pollutes the air, and threatens the climate.

Fracking is the nickname for Hydraulic fracturing and a type of drilling that has been used since 1950. Today, fracking is the United States most reliable source of natural gas and oils. Fracking consists of safely tapping shale rock and other tight-rock formations by drilling 1-2 kilometres or more below the surface before slowly turning horizontal and then continuing several thousand feet more. One fracking site can have a number of wells. Once the well is drilled, the drill is removed and the well hole is made solid.

Energy sources in today’s world are becoming scarcer by the day, as energy is one of our most needed and essential commodities. Who supplies the energy and how much energy they are supplying typically determines the amount of influence one country might have over another regarding our global economy. This is where hydraulic fracturing becomes a controversial and important topic to those of us in the United States. Lately, environmental campaigners have voiced concerns over the large amounts of water that is needed to carry out the fracking process and the possibility of tremors it could cause. For example, in 2011, the Black pool area in England experienced two relatively small quakes. One reading 1.5 and the other reading 2.2 on the magnitude scale. Collin Richardson, vice president of operations for Mineral Resources Inc., feels that the issue is perplexed when he states, "People go to a light switch and expect energy to be there, but they don't think about where it comes from. I don't think most people understand that without hydraulic fracturing, we wouldn't have natural gas to provide electricity to our homes or gas in our cars” (Rydbom). It seems as though there is a misconception about fracking that arises from the environmentalist groups as to what fracking really is. These misconceptions cause an emotional upset with citizens due to the twisting of facts and fake news.

Hydraulic fracturing, or “fracking” for short, is the process of extracting oil or gas from deep beneath the Earth’s surface by pushing water into shale rock to displace the oil or gas (Pritchard, 2013).

Hydraulic fracturing is a process of collecting natural gas by pressurizing shale beds. Fracking consists of two components: a drill and fracturing fluids [4]. Well shafts are drilled into a bed of shale less than two thousand feet deep to form a horizontal fracture because less force is required to make the rock strata buckle perpendicularly to the drill [2]. After the primary shaft has been drilled, cement is poured into the surrounding area to keep the fracturing fluids from backtracking up the shaft [2]. Once the drill is placed into the pay zone, where the reservoir of oil is located, fracturing fluids are forced into the surrounding

First of all, what is fracking? Hydraulic fracturing is the process of drilling and injecting fluid into the ground at high

According to an article in The New York Times, hydraulic fracturing is best described as the technique used to drill down into the earth using a high pressure water mixture to fracture the rocks and extract the natural gas and oil. Approximately one million wells have been fracked since the 1940’s, most of these are vertical wells that drill into porous sandstone or limestone. New technology has allowed for horizontal drilling to capture gas from shale rock. Water, sand and other chemicals are injected into the rock at a high pressure to create the fractures that release the gas. The chemicals added to the water dissolve minerals, kill bacteria that may plug up the well and

Hydraulic fracturing is either referred to as “fracking” or “hydrofracking.” It is a generally new technique for oil and gas extraction. Basically for shale gas and tight oil, including cracking of rock by a pressurized fluid. Even penetrating takes into account the infusion of very pressurized fracking liquids into shale rock layers profound inside the earth. After a well is drilled, it is cased with bond trying to guarantee groundwater security and the shale is using pressurized water broke with water, chemicals, sand and other fracking liquids. This makes new channels inside the stone from which natural gas is removed at higher than customary rates.

Hydraulic fracturing, or fracking, is a method in which a high pressured water, sand, and chemical mix is injected into a well in order to fracture rock leading to the releases of gas or oil to the surface, see Figure 1 for illustration. Fracking was invented in the 1940s but has only become economical in the past few decades due to advancements in technology. The top fracking regions in the

Fracking is a well-stimulation technique used most commonly in oil and gas production. Hydraulic fracking is usually performed on shale reserves, but conventional wells are also able to be fracked. Fracking is an extremely important technique; not only increasing production rates of wells but also adding approximately 20 trillion m3 of natural gas and 9 billion bbl of oil to the US reserves (Montgomery & Smith, 2010).

Hydraulic fracturing begins with tapping shale and rock formations by drilling a mile or more below the surface of the earth before slowly turning horizontal and continuing several thousand feet. After

Another problem that we know exists with hydraulic fracturing is the contamination of the water, the ground, and the air around the sites (Goldman pg. 2). It has been shown that “…residents living near the hydraulic fracturing sites are increasingly worried that the drilling process might be contaminating their well water, polluting streams, and releasing toxic gases into the air (Hobson).” Water sources, as well as the soil, are often polluted from flowback fluid and from production brine (Hydro-Fracking pg.4). Flowback fluid is “the contaminated fluid that returns to the surface during the drilling process, and is estimated to be between 9% - 35% of the fluids injected during