Nano Station M2/M5 Loco Manual

5. Take the tweezers and cover the tips in alcohol before holding over the flame of the candle (this sterilized the tweezers).

Usage of equipment should be monitored constantly and children should be given instructions of how to use it. Equipment should be stored safely and should be checked and maintained regularly. Any damaged equipment should be removed, repaired or made unreachable if its condition creates a risk of hazard.

Step 1 – clean your hands and your nails and make sure they are free of dirt and oils. Use

I will leave equipment alone when not using it to perform a proper experiment or activity.

When using a laminator always follow the manual. Never let you fingers or hands get too close to the heated rollers. Place the laminator away from any paper or highly flammable materials. Always stay with he laminator never leave it unsupervised. When the laminator has been used leave the laminated paper for a couple of seconds to cool down before you remove it from the machine, to prevent being burnt.

Who is the manufacturer for your NIC? What information is given about the manufacturer? You can see an example record returned from this site in Figure 5-5.

45Mbps of available bandwidth. T1s provide 24 64Kbps channels and a T3, made up of

| Given a network design of two or more routers, install necessary memory, interface modules, cables and IOS and test layer 1&2 connectivity.

10.Clean up: Rinse reaction vessel, empty collection box, dry table as needed, cleanup up any baking soda spills..

While using any acid or base don 't drink or eat any substances while working with substances.

In a point-to-point connection, we connect 2 devices and in multi-point there are more than two devices which share the link. Thus, multi-point has more reliability, less installation cost and easy to install.

* Unplugging the system from the power source, so there is no risk of getting electrocuted. Remove the front panel or grill and wash with mild cleaner and warm water and dry with a soft cloth.

1.It support lower bandwidth.it supports 10mbps up to a distance of 100 meters on a 10 BASE-T.

Last clean up time.take off your equipment. Then put it in a safe spot. But just because you'd try this once doesn’t mean you will be good at it. So it will

Before first use At intervals not to exceed 3 months After equipment is repaired All of the above