Network Media Types

The whole thing is usually wrapped in another layer of insulation and, finally, in an outer protective layer. (/coaxial_cable.html)

When performing a cable installation, there are a lot of things that you have to put into consideration. First, you want to draw up a plan. Some things that you would want to include in the plan would be: where your telecommunications rooms are located, what is the distance from your leased line to your core router, and what type of cable are you going to be using for your backbone and horizontal lines. The first thing shouldn’t be cost when you are designing a network. You want to think of the safety and how your network will function with different mediums of cable. These things are important because your network has to meet the needs of the company. You also want to make sure you have things in place

Non Conductive: A serious concern with outdoor cables in certain computer networks is they can be hit by lightning, causing destruction to wires and other cables that are involved in the network. Fiber optic cables can be made non-conductive by avoiding metal in their design. These kinds of cables are economical and standard for many indoor applications. Outdoor versions are more expensive since they require the special strength members, but they can still be valuable in eliminating ground loop and protecting electromagnetic equipment from surge damage.

When first thinking of fixed line networks they think of the coaxial cable (coax) which connects to their television and twisted pair terminated with a RG-11 plug for their phones and faxes. There two variation of coax that are used in networking, thicknet (RG8) and thinnet

The 802.3 family of standards has the format 802.3x where x is a sequence of letters specifying the new standards added to the 802.3 base standard. One of the enhancements to Ethernet is Power over Ethernet (PoE), in which Ethernet cable can provide power to remote, low-power devices that are not near an electrical outlet.

Coaxial cable uses a single conductor in the middle of a cable and the central conductor is surrounded by an insulator which is called the dielectric. Coax cables have become obsolete. Unshielded twisted pair cabling, also known as UTP cabling, has become the most common used network cabling. UTP cabling consists of four twisted pairs of wire, which have a different number of twists per foot, all encased on one sheath. This cabling is graded by different categories. Category 5 is recommended for Ethernet speeds of 100 Mbps. Category 5e, for running gigabit Ethernet or 1000BaseT networks. Category 6 and Category 6a are used to give better performance at higher speeds. Fiber optic cable is wave guided or light guided because it guides the light waves along the length of the cable. Single mode fiber optic cable can operate over long distances. Because fiber allows one mode of light to propagate, light pulses put on the fiber keep their shape much longer. This allows the light pulses to travel much further without interfering with other

For this cable I will use the Rj45 connector which is standard connection for most systems .I would then measure the cable I needed and trimmed it to the proper length using the cable cutter. Then I Used the cable stripper to strip about 1 ½ inch of the jacket from the end of the cable. Pull the trimmed jacket from the cable, there will be an exposed white thread cut that to the end of the strip cable so it will not be in the way of your connector. Untwist all the inner

The same cable lines that are used to send out sound and video signals to carry

This created physical connection between PC’s and the network line. Connected data’s are transporting data’s through the network. Cable is a medium through which information usually moves to one network to another network.

12. Category 5e/6 Cable : cabling is used as a cabling infrastructure for 10BASE-T (Ethernet), full duplex 100BASE-TX (Fast Ethernet) and 1000BASE-T (Gigabit Ethernet, or GbE) networks. The Cat 5e standard provides performance of up to 100 MHz and can be used up to a maximum length of 100 meters.

All of the devises, i.e. routers, switches, computers, fax machines, credit card machine, printers and registers will all be connected with CAT 5 cables. CAT 5 is a measurement of quality and this cable allows for a 100 MB/ Sec data transfer. There are faster options that Kudler Find Foods could have chosen but for their application and budget, the CAT 5 cables will be more than enough to support their needs of the network.

Ethernet Cables- Ethernet Cables will be utilized to connect all the network devices in the DesignIT LAN network. They will connect routers, switches, computers, and printers in the LAN network. I will utilize CAT5 Ethernet Cables for this network. The Ethernet cables will cost about $100 for DesignIT LAN network.

1. Drawings showing a map of cable runs and placement of wiring rooms for networking devices

reviewed and illustrated by comparison of the solutions adopted for two major European cable stayed

Physical media is what physically connects the computers connected on the internet. For this network two physical media will be used to allow access to the application layers of the system. The coaxial cables will be used to create a WAN. While a wireless protocol will be used in allowing users to roam within the network. A LAN will be represented as follows;