Protocol Stack, Subnetting And Results

But how does it work? The internet, based on the concept of “packet switching”, involves the travelling of small packets of data over one or more networks (Frenzel, 2013). This can be compared to “electronic postcards”, meaning that “a computer generates a piece of data and flings it into the net, just like the postal system, except 100 million times faster” (Cerf, 2013). This concept allows one computer to speak to many different computers around the network by sending out these “electronic postcards”. However, before these networks can work seamlessly together, they must use a common protocol, or set of rules for transmitting and receiving these packets of data. There are several protocols currently in use, including the OSI Model, the TCP/IP Model, UDP, HTTP, and FDP (Mitchell, 2014), but the most commonly used is Transmission Control Protocol/Internet Protocol (TCP/IP) (Gilmer, 2011). Even as early as 1977, TCP/IP was being used by other networks to link to ARPANET (Kozierok,

Though the TCP/IP application layer does not describe specific rules or data formats that applications must consider when communicating, the original specification (in RFC 1123) does rely on and recommend the robustness principle for application design.In the OSI model, the definition of the application layer is narrower in scope. The OSI model defines the application layer as the user interface responsible for displaying received information to the user. In contrast, the Internet Protocol model does not concern itself with such detail. OSI also explicitly distinguishes additional functionality below the application layer, but above the transport layer at two additional levels; the session layer and the presentation

• “Application - The Application Layer is the layer that most network users are exposed to, and is the level at which human communication happens. HTTP, FTP, and SMTP are examples of the application layer protocols the Patton-Fuller will now be utilizing for communicating electronically” (Network Design, 2012).

The OSI (Open System Interconnection) model is a set of specifications that allow computers around the world to openly communicate. It is pivotal to understanding and developing computer to computer communications in a network. Each layer plays a role in the process of sending and receiving data. The application layer is the top layer (layer seven) it promotes communication between programs and lower-layer network services. The services at this layer allow the network to decipher a program's request and the program to decipher data sent from the network. The Application layer protocols, programs handles formatting, procedure, security, synchronization, and any other requirements with the network. The Presentation Layer (layer 6) acts as a translator. For instance these protocols decode the jpg/jpeg files sent within the Web server’s HTTP response. So, in the last step (the Application layer) we enter the Web address and it took us to the Web site. This step allows us to see the images and content of the site. The Session Layer (layer 5) regulates and controls the communication between two nodes on the network. It is an ongoing exchange of data between the two and keeps the connection between them for the duration. It keeps the communication secure, detects whether or not the communication has been cut off and if it has it determines where to restart the

You will discover different network topologies and different types of networks: LANs, WANs, and internetworks (internets). The concept of switching is discussed to show how small networks can be combined to create larger ones. You will learn about the Internet: its early history, the birth of the Internet, and the issues related to the Internet today. This module covers standards and standards organizations.

Sockets is the form of communication (UDP and TCP) use the socket abstraction, which provides an endpoint for communication between processes to processes. Interprocess communication consists of transmitting a message between a socket in one process and a socket in another process. As the IP packets underlying UDP and TCP are sent to Internet addresses.

The internet layer is built up of four core protocols: IP, IGMP, ICMP and ARP. Internet protocol (IP) is responsible for routing, IP addressing and breakdown/reassembly of data packets, address resolution protocol (ARP) is responsible for mapping an IP address to a device on the local network, internet control message protocol (ICMP) provides diagnostic information and error reports on lost packets, internet group management protocol (IGMP) controls who receives IP datagrams in a single transmission. The transport layer is built up of two core protocols: TCP and UDP. Transmission control protocol (TCP) sequences and acknowledges packets sent and their recovery when lost in transmission allowing the computer to make and maintain network conversations where applications exchange data, defined as a connection-oriented protocol meaning the connection is maintained until the programs has finished exchanging data. User datagram protocol (UDP) This is used to transfer small amounts of data when the use of error correction isn’t needed increasing the speed of the transmission, common in multi-player video games as the user will not need to receive packets of past events in the game so the error correction featured in (TCP) would be

In general, on the internet, every packet follows 5 layers of structures (Application, Transport, Network, Data Link, and Physical). Since I have to talk about Connection-Oriented and Connectionless as a service, I will focus on the Transport layer because they are part of this layer. It allows multiple applications to use one network connection simultaneously, the layer will create ports on your computer allowing them to be reserved and used by the Application layer. Let's say that port 3600 will be used to send a message to port 80 of some other computer, whenever the port is ready to send a message, it passed on to Transport layer. In this layer, it wraps the message inside the Segment which contains some additional

i) Application layer makes use of the ftp protocol. FTP uses TCP only but it does not use UDP. In normal circumstances an application layer will only use one or the other hence no need to use UDP for its transport needs.

RFC 1180: This RFC is based on a tutorial of TCP/IP protocol. The focus of this tutorial is to tell how the datagram is forwarded from source to destination. The distribution of this memo is unlimited. This RFC defines the key points of TCP/IP, it completely skips the history and development of TCP/IP. It just gives a minimum information related to TCP/IP which is only understandable by technical

The Internet is, quite literally, a network of networks. It is comprised of ten thousands of interconnected networks spanning the globe. The computers that form the Internet range from huge mainframes in research establishments to modest PCs in people's homes and offices. Despite the recent hype, the Internet is not a new phenomenon. Its roots lie in a collection of computers that were linked together in the 1970s to form the US Department of Defense's communications systems. Fearing the consequences of nuclear attack, there was no central computer holding vast amounts of data, rather the information was dispersed across thousands of machines. A set of rules, of protocols, known as TCP/IP was

The two authors follow the story from the conception of the idea of "packet switching" in the early 1960s to the creation and development of the Internet. We see how one idea led to another and how the intelligent people around the circumstances influenced the developments.

Internet Protocol (IP) datagrams may arrive in a seemingly random order of chunks that the receiving IP entity must continuously collect until it can reconstruct the original datagram. Consider that the receiving IP entity possesses a buffer for assembling the original datagram's data field. The buffer will comprise of chunks of data and "holes" between them corresponding to data not yet received.

Over the next 10 years, we will see a change in technology, and the Internet. Things will continue to progress, and fundamental changes will easily be defined. Technologies have revolutionized how people spread and consume information; these changes will redefine who we are as consumers, merchants, and individuals. With the expansion of computers and the Internet connectivity, people are able to share more of their lives with family and friends. Technology has offered the world so many different services, which include emailing, instant messaging, search engines, blogs, and Wikipedia. These services have changed the way we communicate with others, our knowledge, and the way we conduct business. With the increasing usage of the Internet, developers continue to find ways to improve technology and the way we utilize the Internet. Technology has a wide range of different aspects and concepts, which includes protocols. There has to be rules, and objectives in any and everything we do, and protocols governs communications, errors, detections, messages, and speed. There are three technology concepts behind the Internet, and they are packet switching, Transmission Control Protocol/Internet Protocol (TCP/IP) communications

The Internet is a global system of interconnected computer networks that use the standard Internet protocol suite (TCP/IP) to serve billions of users worldwide. It is a network of networks that consists of millions of private, public, academic, business, and government networks, of local to global scope, that are linked by a broad array of electronic, wireless and optical networking technologies. The Internet carries a vast range of information resources and services, such as the inter-linked hypertext documents of the World Wide Web (WWW) and the infrastructure to support electronic mail.