Qatar Civil Defense - Fire Safety Standards

At the time of the MGM Grand Fire, it was not required that fire department personnel had to be part of the building construction plan review process. The fire department is now largely involved in the construction and plan review process before a building is built. Also, construction materials used are more fire resistant. Ventilation systems have also been improved, and are very helpful in removing the smoke, rather than allowing it to make its way to upper floors of a high rise structure, which was a large cause of loss of life in the MGM Grand fire due to smoke inhalation and carbon monoxide poisoning.

| Describe how and when the different types of fire extinguishers, relevant to the given occupation, are used in accordance with legislation and official guidance.QCF641. 3.7 & 3.8

State the appropriate types of fire extinguishers available when installing 1st & 2nd fixing components & when using cutting and shaping machines and describe how and when they are used in accordance

Inherently the fire service operates in high-risk environments to facilitate the role of preserving life safety and property conservation. How these incidents are managed and safeguarded by our administration

Following a fire risk assessment an employer must provide the following in order to safeguard the safety of ‘everyone’ in case of fire:

Nowadays, it is almost impossible to find a building that does not have exit signs or fire extinguishers in America. Whether in a university or at the work place, exit signs and fire safety instructions can easily be found by anybody. Fire drills are regularly practiced to ensure the least amount of casualty will occur if something goes wrong. However, a hundred years ago safety issues were barely taken into considerations and safety regulations were most of the time inexistent, as illustrates the terrible fire that happened a hundred years ago at the Triangle

* All electrical and fire extinguishers are checked annually by a qualified person and a label is stuck on the

The change to engineered lumber also means less wood to burn resulting structure collapse much sooner, risking the lives of unaware firefighters. In addition to building techniques, improved technologies have also given rise to many engineered materials that replace traditional materials found in home furnishings such as cotton and wool. Today, homes are constructed and filled with furnishings that have a petroleum base such as plastics and polycarbonates. These engineered materials burn many times hotter and faster than traditional building materials or what is considered legacy furnishings. In an experiment conducted at the NIST laboratory, two same size rooms, filled with matching furnishings. One room was filled with modern home furnishings while the second room was filled with furnishings made of cotton, wool, and solid lumber. Both rooms were ignited simultaneously, the modern room burned rapidly and flashed over in approximately eight minutes whereas the legacy room took twenty minutes to reach flashover. When we consider the length of time to call 911, take the call, dispatch units, drive to the scene, tag a hydrant and pull a line most likely takes longer than eight minutes, the timing until flashover is critical for victims and firefighters. Additionally, there is a significant difference in temperatures generated between the modern and legacy rooms. The legacy room high temperature reached approximately four hundred degrees before

Fire Suppression System is in place. Automatic Extinguishing system [AES] meets the requirements of standard UL-300 at the time of the survey. Equipment has service tags attached and is equipped with standard 16 gage hoods /duct works. Fire Suppression System is in place. Automatic Extinguishing system [AES] meets the requirements of standard UL-300 at the time of the survey. It has an emergency release button. Cooking equipment consists of a grill, range oven, salamander and a deep fat fryer. Grease is allowed to cool before draining it into a metal container for disposal. There is a main gas shut-off in the kitchen. A fire suppression system protects the cooking equipment. It is inspected every 12 months. Chemical fire extinguishers in the kitchen are inspected annually. The hood and ductwork are cleaned by contract every 3

Many fire service personnel that have fifteen or twenty years of service have seem many things change over time. One radical change is the way fires consume structures today when compared structures years ago, these fires have be classified as modern and legacy fires. When responding to a modern construction fire versus a legacy fire, does it change how we fight these fires? Well the answer to that is simply yes! Modern construction physiognomies have greatly changed to accommodate the comfort of the homeowner, which is not firefighter friendly. In modern construction home the floor plans are larger in size to give more living space. As the living spaces grow the footprint of the residence increases as well. As the word modern leads to occupants thinking comfort, when truthfully causes disadvantageous consequences for the fire service with open geometrics, new construction materials, and also include an increased fire load. All these construction advantages only lead to faster propagation of the fire, as well decreases the amount of time for a flashover to occur. Modern construction has led to hasty changes in fire dynamics, which at the same time decreases the amount of time to escape to safety. The structural collapse time is greater since the amount of time as been lessened

Fire protection engineering, or the application of science and engineering to protect people and their environment from fire, has been around for centuries. The problem with advancements in this field is that they are preventative and, if ahead of their time, often seen as unnecessary. As a result, they are usually not considered or implemented until after severe tragedy has struck. A prime example of this is also the first recorded use of fire protection engineering. In AD 64, Emperor Nero had regulations drawn up that required fireproof materials used in the external walls to the city. This, of course, happened only after an estimated seventy percent of Rome was lost to fire. More noticeable regulations happened

Within the United States there are five different types of construction. Firefighters need to know and understand each of them. Every construction type have fire resistant weaknesses, these weaknesses will result in fire spreading in the building. If firefighters understand how the fire will spread, then understand how to extinguish the fire faster and more importantly firefighters are better protected from injuries or worse. In America all buildings are associated with one of the types of construction, identified by Roman number. The building codes are, fire resistant (type I), combustible (type II), ordinary construction (type III), heavy-timber construction (type IV) and wood-frame construction (type V). It is important to remember that all buildings are not the same. Each different building construction type will burn much differently than the others do. In order to be able to size-up a building 's fire hazard, firefighters need to be able to understand a buildings contents and construction. Materials that are stored inside of the building and also materials used to construct the building will both fuel the fire. Also know that if a structure is vacant or if the contents in the building are not combustible, the main fire hazard is the building. The scale of the construction types are scaled according to the fire load of combustible material that was used for its construction. A fire resistant building is constructed with least amount of combustible materials, and a

Communicating hazards will be done using signs and symbols. This will include fixing warning symbols to hazardous equipment regarding the proper handling to avoid sparks or fire such as lighters, gas cooking stoves, and propane heaters. Also included will be notices placed on a communication boards to warn employees of proper handling of tools, electrical cords, and outlet strips. Fire response directives will also be placed in the communication area indicating correct response in the event of a fire. Training will advise employees on the handling and packaging flammable tools and equipment to avoid the risk of injury.

In order to evaluate common fire hazards within a building and the risks presented by these, it is essential to have an understanding of where fires start, and what causes them in varying occupancy types. The best process to fulfil this aim is to review existing statistical data. Existing data is a vital tool in analysing areas or functions of a building which have the greatest risk to occupants. In particular, those functions or areas of a building having higher fatality rates historically in buildings of a similar type should be treated with special consideration (i.e. Class 2, Kitchen). It is important to be familiar with these statistics as they play a key role in predicting outcomes of future fires. Using this knowledge, fire safety engineers can identify patterns and high risk factors; and apply appropriate building fire safety systems in an attempt to reduce fire

The company can also ensure the installment of fire extinguishers and fire exit doors within the firm’s premises to create better channels of evacuation during fire outbreaks. In addition, smoke detectors and alarms should also be installed to signify and create warnings in case of such.