Essay on The Difference Between Logical and Physical Network Design

2. Enterprise networks typically use LAN _____ at each site to connect devices using some type of media.

The network consists hardware and software components and other components to keep the company safe. A common network that Jay’s company will need are routers, switches, firewalls, load balancers, SANs, and Domain Name System (DNS). The router and switches will allow the systems to communicate. Jay needs to ensure that the routers have spare capacity after the deployment to cope with projected growth and usage. The switches will connect to the system within the network. Both running at capacity tend to induce escalating bottlenecks. This will affect how long it takes for the clients to submit messages to the servers on different networks, Jay needs to make sure he is up to date with the router and switch because it can cost greatly if he does not.

Routers and switches will be utilized to route network signals to all areas of this large network. Telephony systems will be introduced to serve the VOIP located at each location to assist with communication needs. Wireless technologies will also be needed to assist with mobility and other devices such as printers, laptops, fax machines, etc. Lastly, a physical firewall will be enforced at each location to protect the network from internal and external intruders.

A computer network set up around an individual person in one building. i.e. in a house or a small office

When setting up a network that will consist of many host computers, one of the first things that an administrator must do is to determine what class of networks that they must administer to a given business. This is the point where every administrator must know how to implement classful and classless IP addressing. A classful network is a network addressing architecture used in the internet from 1981 until the introduction of Classless Inter-Domain Routing (CIDR) in 1993. Classful IP addressing divides the addtess space on the internet into five address classes. Each class is coded in the first four bits of the address. Today

It is generally limited to a geographic area such as a writing lab, school, or building. Rarely are LAN computers more than a mile apart. In a typical LAN configuration, one computer is designated as the file server. It stores all of the software that controls the network, as well as the software that can be shared by the computers attached to the network. Computers connected to the file server are called workstations. The workstations can be less powerful than the file server, and they may have additional software on their hard drives. On many LANs, cables are used to connect the network interface cards in each computer; other LANs may be wireless.

There are various types of equipment that the company should look for when considering this network. The first item to look at when considering equipment is the Operating system and software that we would need. Next, the group took into consideration the type of server the company needs to make this network a reality. Another thing that we looked at is the possibility of having ThinClients over regular desktops for all workstations. Of course, it was taken into consideration that some employees would not want ThinClients. So, we show the type of tower we plan to place into those spaces, along with any peripheral device for both. Then, we will look at the network devices that will go into each building that include switches, routers, repeaters, hubs, and wireless access points. Finally, the group will note guidelines for choosing a local ISP at each site. Each Item outlined helps to build a network based on the specifications given by the company.

6. A starting address of 192.0.0.0 and ending address of 223.255.255.255 is a member of which network class? Class C

The proposed network is designed to serve DesignIT which consist 56’x36’ office space, 4 cubicles, 1 office, 1 server room, 1 receptionist desk and 1 conference room.

Q:1. Briefly explain following designing requirments that are required when designing the hardware and software infrastructure :

The current hardware and software components will need to be upgraded at the three locations for this new network. For starters, each location will need to have a Network Interface Card (NIC) implemented. This will allow the workstations or any other

1. Drawings showing a map of cable runs and placement of wiring rooms for networking devices

In the calculation it can be said that they only 7 stations are needed. With this number of workstations one could achieve the highest efficiency at this moment. But the company will grow rapidly. Therefore they had to add new stations every year.

You are the network manager of a company that has grown from 10 employees to 100 employees in 12 months. Year 2 projected growth is estimated to be 100 additional employees located at a remote location. The aggressive growth has brought about some unique challenges and opportunities. The company has one remote warehouse and no off-site disaster recovery services or servers. The network design remains a non-redundant, flat topology.

The proposed network is designed for the UMUC new building in Rockville. This new building will have some administrative offices, lecture rooms, library, and computer labs with an open Wi-Fi. This new building will have total six computer labs that will be used for instruction. Each of these labs will have 25 computers, 23 student computers and one instructor computer, one server in the closet and in addition to the six computer labs, there will also be a Student Computer Lab that will provide computer access to students for doing their own purpose like homework. In Student Computer Lab there will be 30 computers and a server in the closet. There will be 10 computers for student’s use and 5 computers for Library staff in the library so they can access to the library resources for staff use, with the exception of the admissions office, which will have five computers. There will be six class room which will have a computer for instructor’s use. Finally, there will be 7 offices in the building and each of these offices will have one computer. There will be two server rooms, one on the first floor and another one on the second floor. There should be at least 3 separate networks: Administrative, Instructional, and Public. All staff-accessed computers will be on the