The Greatest Industry Of Hydraulic Fracking And Its Environmental Impact

fracking technique was not used on a commercial scale until the 1990s, in the Barnett Shale in

Hydraulic fracturing is also known as “fracking” is a technique which involves drilling down, then horizontally as far as 10,000 feet below the surface to release natural gasses stored in the sedimentary rock known as Shale. The channel is then encased with concrete or occasionally steel to allow millions of gallons of water to be injected into the wellbore. Most water used in fracking comes from surface water sources such as rivers, lakes, or other accessible bodies of water nearby. Not only is there water being funneled into the wellbore, but also a mixture of sand and other chemicals. When the high-pressure mixture is injected underground it fractures the Shale around the wellbore and creates fissures. The fissures are then held open with

Hydraulic fracturing, better known as fracking, is the process of removing oil and natural gas from in between layers of shale and other low-permeability rocks. This is done by drilling both a well and a horizontal tunnel. Sand and chemicals are shot through the tunnel with incredible pressure, which cracks the shale allowing the oil and natural gas to travel up the well (Jackson, 2014). Fracking has caused a breadth of controversy due to the economic benefits and the geological consequences.

“Fracking is the process of obtaining Natural Gas from below Earth’s surface by drilling 1000’s of feet into the earth before a high-pressure water mixture is directed at the rock to release the gas inside.” Water, sand and chemicals are injected into the rock at high pressure which allows the gas to flow out to the head of the well.” (Jackson). Hydraulic Fracturing got its name due to the fact of how the rock is fractured apart by the high pressure mixture of a number of chemicals, sand, and water. Drilling companies first began Fracking in the early 1940’s, and starting in the 1990’s companies began “safer drilling” due to the amount of concerns that had arisen because early drillers had to detonate small explosions that eventually ended up killing many people. Fracking has been used for nearly 60 years and the number of concerns about it are rising every day. Due to the new technological advancements in drilling Fracking has changed greatly over the years. Before, the drilling would go on for weeks on end in order to extract only a small amount of natural gas. Now, due to the invention of higher powered drills, the drills get double the amount then they used to be able to get in more then half the time. Over 95,000 square miles of shale deposits have been found around the Appalachian Basin but the only way to reach these deposits of shale is through fracking. “Fracking is a technique designed to recover gas and oil from shale rock by drilling

Hydraulic fracturing, or fracking, is the process used to excavate oil and gas trapped in shale rock.

Yet, according to Environmental Heath Perspectives author David Holzman (2011), “In a study of 68 private drinking water wells in northeastern Pennsylvania and New York, methane contamination rose sharply with proximity to natural gas drilling and hydraulic fracturing (“fracking”) sites” (p. 1). The Pennsylvania Department of Environmental Protection (DEP) suspects that the cause of this contamination is the result of leaks caused by poor gas well construction at the fracking sites. Not only is the water surrounding the hydraulic fracturing sites getting contaminated but it is also getting depleted at a fast rate. According to Scientific American journalist Bobby Magill (2015), “Oil and natural gas fracking, on average, uses more than 28 times the water it did 15 years ago, … putting farming and drinking sources at risk in arid states, especially during drought” (p. 1). One of these states is California which is undergoing one the worst droughts in its history. Despite this fact, California is still extracting natural gas using hydraulic fracturing. There are also other types of environmental problems that threaten America’s landscapes which are caused by hydraulic

Oil has been an important resource for life, and humans have been looking for places to extract it ever since its discovery. Hydraulic fracturing, or fracking, is a method of extracting oil and gases by drilling deep underground. A water based mixture, consisting of millions of gallons of water, sand, and chemicals, is injected at high pressures, fracturing rocks and allowing these oils to be collected. Fracking has been documented in several California counties, ranging from urban cities, such as Los Angeles, to rural areas in Central Valley. The underlying question is whether fracking should continue, as it provides the state and country with vital resources, but poses a great threat to the environment.

Unlike traditional oil or gas drilling, hydraulic fracturing uses a combination of chemically treated water and salt to break shale rock; this releases oil or gas that would not be accessible with traditional drilling methods. The oil or gas is then displaced by the water and salt and eventually collected

Hydraulic fracturing is a process of collecting natural gas by pressurizing shale beds. Fracking consists of two components: a drill and fracturing fluids [4]. Well shafts are drilled into a bed of shale less than two thousand feet deep to form a horizontal fracture because less force is required to make the rock strata buckle perpendicularly to the drill [2]. After the primary shaft has been drilled, cement is poured into the surrounding area to keep the fracturing fluids from backtracking up the shaft [2]. Once the drill is placed into the pay zone, where the reservoir of oil is located, fracturing fluids are forced into the surrounding

Hydraulic fracturing or fracking is the process of horizontal drilling past the water table into shale rock about 5,000 to 9,000 feet vertically and up to 10,000 feet horizontally. Then pressurized fracking fluid is pumped into the ground to bring the oil and natural to the surface. In the United States, there are more than 500,000 active natural gas wells.

According to an article in The New York Times, hydraulic fracturing is best described as the technique used to drill down into the earth using a high pressure water mixture to fracture the rocks and extract the natural gas and oil. Approximately one million wells have been fracked since the 1940’s, most of these are vertical wells that drill into porous sandstone or limestone. New technology has allowed for horizontal drilling to capture gas from shale rock. Water, sand and other chemicals are injected into the rock at a high pressure to create the fractures that release the gas. The chemicals added to the water dissolve minerals, kill bacteria that may plug up the well and

Hydraulic fracturing is either referred to as “fracking” or “hydrofracking.” It is a generally new technique for oil and gas extraction. Basically for shale gas and tight oil, including cracking of rock by a pressurized fluid. Even penetrating takes into account the infusion of very pressurized fracking liquids into shale rock layers profound inside the earth. After a well is drilled, it is cased with bond trying to guarantee groundwater security and the shale is using pressurized water broke with water, chemicals, sand and other fracking liquids. This makes new channels inside the stone from which natural gas is removed at higher than customary rates.

So what is fracking? Hydraulic fracturing, or fracking, has played an important role in the development of America's oil and natural gas resources for nearly 60 years. In the U.S., an estimated 35,000 wells are processed with the hydraulic fracturing method; it’s estimated that over one million wells have been hydraulically fractured since the first well in the late 1940s. (www.energyfromshale.org )

In today’s society the issues of producing energy is becoming more and more scare which, constantly posses the question, “How will energy be obtained in order to sustain future generations?” Hydraulic fracturing, informally known as fracking is believed to be an effective alternative to provide us with the energy we need to fuel tomorrow. Hydraulic fracking was first used at Texas Stanolind Oil and Gas Cooperations in 1947. However, it was not until 1949 that The Halliburton Oil Well Cementing Cooperation was given a licensee to use hydraulic fracturing. Since then a combination of two advanced methods have been introduced and incorporated (4). These methods are slick-water hydraulic fracturing and precision drilling of wells. Nevertheless,

Hydraulic fracturing or fracking is a process used to remove natural gas from shale buried thousands