Unit 3 Assignment 3 Broom Tools

While the oil is draining, locate the oil filter it is white and oval. The oil filter is usually located on the side near the back. After, you locate the oil filter take it off with the oil filter wrench. Once the oil filter is off dispose of it in the trash, then get the new filter, and fill it up with oil before attaching it back to the motor. This step is called priming the car. Priming is when you basically jump starting the motor with whatever you took out. Now the car should be finished draining oil. You can tell its finish from when you look under the car near the motor and see no oil coming out. Once, that is noticed get the oil bolt and put it back in tight, but not too tight because that could strip the bolt out.

| State how the health and safety control equipment relevant to the work should be used in accordance with the given instructions.

1.1 We should always check equipment which we are going to use if it is safe and working properly, we should wear PPE every time we are undertaking any task, ensure that we are trained to do the task, we should keep the working place safe and clean. When we are about to take measurement from an person we need to make sure that the person know exactly what we are going to do and asking permission for the task we are about to do. Recording the task in the chart and keep it confidential to protect personal information during the course of our work.

Hard ground should be swept and even to avoid any hazards e.g tripping over uneven flag stones.

Have you ever woken up on a beautiful Sunday morning only to find that your yard has grown completely out of control? Well don’t fret, this paper will guide you through the steps required to have your lawn look like you’ve been mowing your whole life. Having the skills to conquer any yard will make you a star in the field of landscaping worldwide. By mastering the strategies contained within these lines you, too, can be the Master of the Yard. The key sections of a good mow job are, preparing the equipment, the cutting of the grass, and inspection and clean-up. Let’s take a look at how to first prepare your mower for the task at hand.

It’s important that health and safety procedures are followed when using different types of equipment. The main focus is to keep a safe and hazardless environment for you and the people around you.

oil level, if is low poor some more. The only other step now is to properly dispose of the old

| Describe how the health and safety control equipment relevant to the work should be used in accordance with the given instructions.

Equipment to be used – Before using any equipment it is vital you check the equipment is available, clean, in good condition, in good working order, the right piece of equipment for the activity you need to carry out as well as the right piece of equipment for the individual, the correct number of people are there to use the equipment and that you do not use any equipment you have not been trained to use.

| Training staff on the proper way to utilize and maximize the usage of all equipment.

The first thing you need is the weed eater. Then you need to check if there is any gas in the gas

The accelerator rolls rotate at around 320 RPM to grab the crop from the feeder chains and the launch the crop into the rotor. The accelerator rolls are located on top and below the feeder house so they mash the crop between the interlocking rolls as the crop passes through. The goal of the accelerator rolls is to keep the rotor full with crop. This begins the processing and breaking down of the crop into clean

For areas that are truly dirty, you may need to be closer to the targeted area if you want it to be completely clean. This pressure washer is designed for light to medium cleaning. If you choose to try to clean heavily soiled areas, you will probably not be very happy with it.

When you remove your filter, wipe down all of your pipes and make sure that no debris is clogging them up.

Slow down engine(s) on indicated side – Arms and wands down, wave either right or left wand up and down indicating engine(s) slowing down respectively.