Wi G Lab Report

Rating for the respective network is obtained by substituting the values in the above equation as follows

“Networks are all around us. They are in our walls, in the air. At schools, hotels, hospitals, even coffee shops. Always there, always on…This power exists today. In our routers. In our switches... . (Cisco, n.d.)

He mentioned using applications like Airport Utility to track wifi strength in an area, you can walk around and it will tell you when the strength decreases and increases depending on where you are standing. Although we usually pass off troubleshooting wifi strength issues because we do not manage the wireless, it could be a way we can check to make sure if there is an actual strength issue in a resident's

Thus the speed and reliability can be improve by judging the number of antennas. In the aspect of data rate, Option 1 has the highest transfer rate comparing to routers that has single-band capabilities. This indicates that Option 1 is able to perform better by transferring 600Mb data per second, 150 Mb more than other routers. Option 1 is strongly recommended as it is more affordable in prices with comparably better performance. Furthermore, Option 1 is equipped with various wireless LAN standard that provides faster and reliable wireless signals. It uses either 2.4GHz (single band) or 5GHz (dual band) band of frequencies in which wireless communications operate. Demands of dual band arise when there are intensive work within a LAN network and provides better internal network performance due to less interference (Lynn,

This is a direct extension of the 802.11b that extends the maximum data rate to 54Mbps, making it possible to serve up to five times as many users. Our Wi-Fi network is based on the IEEE 802.11 b/g standards, which is the most commonly used standard. We have added Wi-Fi access points in our network to give easier access to corporate data and services. Most of the devices in this network, for example the personal computers, smartphones, digital cameras, tablets and digital audio players connected using the Wi-Fi technology. The hotspot will be in the range of 20 meters (66 feet) indoors and a greater range outside.

The wireless local area network diagram uses a combination of three different topologies. The topologies represented are Ring, Star, and Mesh.

| Given a network topology of three or more routers with bandwidth designations, compare the metrics used during the route selection process and the resulting routing tables generated by the DUAL and SPF algorithms.

Wireless attacks have becoming a more common security issue when it comes to networks. Attacks can get a lot of information that is being sent across a network and use to commit crimes in other networks. Every wireless network is vulnerable to attacks and it is the important that all the necessary security measures are taken so as to prevent the mess these attacks can cause. These attacks are normally carried out to target information that is being shared through the networks. It is therefore very important to know of such attacks so you will be able to identify the attack when it happens.

It was observed that as the number of nodes increase, so would the network lifetime. There are three states in the defined in GAF. These states are: finding in which neighbours are decided in the grid, active for reflecting the participation and sleep in which radio is turned off. The transitions of state are shown

It was designed to replace 802.11a, 802.11b and 802.11g. It has the fastest transfer rate of (600Mbps) and the longest signal range compared to its predecessors. It operates in both 2.4GHz and 5GHz range.

Party Plates Company has established the need for a new proposal with wireless technology. Team B will research some marketing tools that will assist Party Plates in meeting their goals of advancement in sales and certain goals. This proposal will focus on wireless technology that will be beneficial to the party plate business. Team B will also provide the pros and cons to these wireless technologies and justification of the choice to incorporate them into Party Plates Company. In the proposal, Team B will also include a spreadsheet presenting the equipment needed for using the technologies and the costs

observed. This effect can be seen in Figure 3.6(b) where the energy saving is up to

Step 1: Construct a network diagram for the project. (NOTE: EF for activity H should be 19)

It’s very important to determine the device and application requirements based on bandwidth, protocols and frequency. In wireless network, bandwidth, protocols and sometime environmental conditions affect the speed of the channel so we need to calculate the aggregate throughputs before designing the network. Today, users carry Wi-Fi devices such as notebooks, laptops, tablets and Smartphone’s so total throughput must be calculated by estimating number of connections rather than the number of the seats. Some common wireless networking standards such as 802.11a/b/g/n invented in the IEEE association must be supported by wireless network. For better performance and for faster devices (802.11n devices), dual-ratio access points should be deployed. Table1 [3] illustrate the different IEEE standards and throughput.

CE1.17 A survey was conducted by using a wireless adapter for detecting the existing active access points and measuring the signal strength in new location site. Since pre-deployment survey was initial process for coverage site survey, I decided temporary access point as the reference point and applied trial and error method to identify different APs located within the limited boundary.