Wireless Local Area Network Technology Project Analysis

Wireless network infrastructure has become just another connection method for corporate and home users alike. This rapid acceptance can be attributed from:

Wireless Routers is a wireless local area network (WLAN) that determine the next route of the packet should travel to the destination (Rouse, 2005). It converts the internet connection that was received from phone lines into radio signals and brings convenience to the portability devices that has built-in network card to gain the radio signals to get to the Internet connection (Switcher, 2015). Table 2 refers to the comparison of three models of wireless router.

Today’s current standard of 802.11 is 802.11ac. When comparing newer routers for home use, you will run across routers labeled AC1200, AC1750, AC3200, and so on. The “AC” refers to the wireless standard, while the number following it refers to the speed. The current range of 802.11ac routers can provide speeds up to 1300Mbps on the 5 GHz band, and up to 450 Mbps on 2.4 GHz band. The base level for 802.11ac is more than twice the speed offered from the previous standard, 802.11n. Most routers available in stores today offer 802.11n or 802.11ac, older standards such the “a,” “b,” and, “g” are out of

4. Use the Internet to research one to two applications of the identified wireless technology. List each application found. Reference the websites you used to locate this information.

It was designed to replace 802.11a, 802.11b and 802.11g. It has the fastest transfer rate of (600Mbps) and the longest signal range compared to its predecessors. It operates in both 2.4GHz and 5GHz range.

In the recent years, wireless technologies have taken a new dimension in the ways society lives. Wireless broadband is available to everyone. Whether the users are at home, driving the car, sitting in the park, and it would even work while people are a pleasure boat ride in the middle of a lake. And because of this, the need to have information at any time and be connected in all places, all the time has been satisfied.

Ciampa, M. (2013). WNA Guide to Wireless LAN’s (3rd ed.). [VitalSource Bookshelf]. Retrieved from http://www.devryu.net/

You are sacrificing a more spread out coverage area for the ability to shoot a narrow RF beam over a greater difference, lending more stability and higher possible speeds to your WLAN. Week2: Relationship Characteristics Checkpoint

The market for wireless communications has experienced incredible growth over recent years and wireless LANs have rapidly become a very

Although to answer their many questions and concerns, IEEE expanded even further and created 802.11g. Having 802.11g was like having the best of both worlds with and achievable speed of 12 to 25Mbps, top speed of 54Mbps, 2.4 GHz frequency band and the production cost was low what could top that one would have to ask. The disadvantage is that it cost more than the 802.11b, to include the change in modulation created the same congested problems as that of 802.11b. The advantage is that it was compatible with both 802.11a and 802.11b, which made previous compatibility issues null and void. Similar to 802.11a, 802.11g transmit faster because it uses OFDM instead of CCK

25. Which version of 802.11 technologies can use two antennas at both the access point and the network adapter? 802.11n

In 2002 and 2003, WLAN products supporting a newer standard called 802.11g emerged on the market. 802.11g attempts to combine the best of both 802.11a and 802.11b. 802.11g supports bandwidth up to 54 Mbps, and it uses the 2.4 GHz frequency for greater range. 802.11g is backwards compatible with 802.11b, meaning that 802.11g access points will work with 802.11b wireless network adapters and vice

This report fulfills the specific requirement for documentation as specified in FIT 5083 Assignment 1. In this technical report, we will identify the various steps and techniques used in deployment of wireless network. Initially, what is networking or network infrastructure? Networking mean to connect two or more devices and configure them in such a way that they can communicate with each other. In networking, network infrastructure means to connect the software and hardware part rather than actual connection between two devices. Now days, wireless network connections are highly on demand because it’s easy to access and it does not require any cabling structure.

A wireless network is any type of computer network that uses wireless data connections for connecting network nodes .Wireless networking is a method by which homes, telecommunications networks and enterprise (business).Installations avoid the costly process of introducing cables into a building, or as a connection between various equipment locations. Wireless telecommunications networks are generally implemented and administered using radio communication. This implementation takes place at the physical level (layer) of the OSI model  network structure.

As we all know 5GHz frequency are poor performance on long-distance transmission and through, we may want to ask why they remove 2.4GHz from 802.11ac. We now commonly used Wi-Fi basically work in 2.4G wireless frequency band, using 802.11b / g protocol. But as more and more equipment is added to the 2.4GHz, the channel became very crowded between 2.4 to 2.485GHz, because too many electronic devices are working in this band (e.g. wireless keyboard, wireless mouse, Bluetooth and other). The crowded channel will make the equipment to seize resources. For example, we are all connected to same wireless router, everyone’s computers and routers must communicate, if only one computer, it is very simple, it can take ‘dialogue’ with router, because there