how to change a tire Essay

Doing my first experience of changing a tire it was not that easy as it sound because it took some strength and muscles to pick up the tire and exchange it for the spare. I had to have the knowledge about how to use the jack, jack handle, and lug nut wrench. I also had my parent there to help me and an owner’s manual to help. When I jumped a dead battery I made sure I use the positive cables then the negative to do it. I made sure I did not make to two cables touch each other because it may can a spark or cause the car to explode.

Therefore, you will raise the jack so that it almost touches the car. Once the jack is raised enough to just touch the car; position the jack so that it is not tilted; furthermore, make sure the jack is 6 – 12 inches behind the front or rear of the tire. When you are sure the jack is in position correctly; proceed by raising the jack, so that the car will rise off the ground. Remember you need to fit a fully inflated tire in place of the flat; therefore, make sure you jack the car up enough to get a fully inflated tire under there. Once you have the car off the ground; go ahead and remove the lug nuts with your hand. Now, grasp the wheel at 3 o’clock and 9 o’clock and pull the wheel straight off. Place the flat tire in the trunk; otherwise, it will be in the way while you are working. You will then, pick up the spare tire and line up the holes with the threaded shafts; then slide the spare tire onto the threaded shafts. Next, you will spin the lug nuts on by hand; indeed, you have to turn the lug nuts clockwise to tighten them.

Making a tire teeter totter is not as hard as you may think. There are a few steps that need to be done in the right way so the teeter totter works properly. Supports for the seat are the most important detail you need to make sure is done correctly.

Things like that are essential since you would prefer not to get a punctured tire on the roadway or experience a complete victory. That can be risky and even deadly.

You're driving along with your mind on the all that homework that has to be done before 10pm for you class, and suddenly your car pulls to one side and you hear that dreaded flapping sound of a flat tire.

Knowing how to change a flat tire is a necessary skill for all drivers to have as soon as you realize you have a flat tire is slowing reduce the speed of your car while turning on the hazard lights and safely come to a stop on the side of the road. After you have come to a stop engage the parking park and begin to take out all tools necessary and the spare tire and put them near the flat tire. Once you have taken everything necessary out begin to loosen the lug nuts turning counterclockwise but do not remove them completely. Once the lug nuts have been loosened begin to place the jack under the car in the correct spot then begin to jack up the car until the tire is about six inches off the ground. After the car is up then remove the lug nuts

The jolt to a vehicle’s suspension from hitting a large pothole or a curb can throw your car’s wheels out of alignment and damage your tires over time. When a vehicle’s front end is out of alignment, tires will wear unevenly and handling problems are possible. Furthermore, a misaligned front end can increase wear and tear on front suspension components, increasing the cost of repairs. Safe driving depends on preventive care and maintenance of the vehicle, including wheel alignment and the tires. Properly maintained tires improve the steering, braking, and traction of the vehicle. Fifth Gear Automotive offers professionally certified mechanics in Lewisville, TX for all your automotive needs.

However has a car, truck or bus ever pulled out suddenly in front of you? If this causes an accident your lifestyle, health, family, work and bike can all be adversely affected.

Take advantage of regular tire rotation to lengthen your tire's usefulness. What is tire rotation. Tire rotation is simply moving the front tires to the rear and moving the rear tires to the front of your vehicle. Certainly, the key to even wear on tires, is regular tire rotation.

After getting the new inner tube and tire, flip the bike over so that it is now standing on the seat and handlebar. Then unscrew the two bolt on the side of frame on the bike. Next take the rim which is the big circle metal piece that has the tire on it. Thereafter take out the air from the tire by press the little button that looks like a little circle inside the valves of the tire with a flathead screwdriver. Soon after squeeze the tire together all around the rim so that there is enough space to put the tire lever in the space between the tire and rim. Subsequently take a couple of tire levers which is a piece of plastic that is flat on the back and sticks out in the front and take the tire out of the rim. Next take the inner tube out off the rim. Then take the new tube and tire out of it box or cover. After put the inner tube on the rim to see the placement. Alongside fill the tube up with some air. Then put the new tire on the rim and it will be outside of the rim but little by little using the tire lever put little parts of the new tire in the rim. Next put the tire back into the bikes frame and have correct placement which is when the rim doesn't touch the brake pads or the frame. Screw the bolts back on, so the tire doesn’t fall off when the tire is rolling. Now go for a test ride and see if it feels different or if the brakes work

In American culture today, citizens in the younger generation rarely do things for themselves. Most licenses drivers would not even know where to begin if they were to have a flat while traveling alone. This is not because it is a very difficult task or drivers do not have the tools to do such, but simply from laziness. Changing a flat tire is a simple fix with a little elbow grease and the basic tools that are in every car unless someone has removed the tools. The three basic steps of changing a tire are, relieving the pressure off the tire, removing the tire and replacing the flat with a new tire. If done incorrectly the driver will be a hazard to themselves and to others on the road.

Although the safety of all motorists depend on the condition of their tires, too many people risk their lives on the road because they don't understand tires well enough to properly care for them. A large part of this problem is the widespread tire misconceptions which result in accelerated tire wear and even car accidents. Increase your safety on the road as well as fuel efficiency by getting your facts straight about these four common tire misconceptions:

Next, you need to take off the hubcap that is keeping your tire in place. You are going to need to use a tire iron to take the hubcap off your trailer. You are going to need to put the tire-iron under the top of the rim, and then work slowly to loosen and pull of the hubcap. You should work around the tire in a clockwise direction.

You are driving along the road and your vehicle seems to pull toward one side more than the other. You drive along at a normal speed and witness your vehicle vibrating like crazy. These are typical signs that your tires are uneven and this is a serious issue. Tire rotation serves to balance out the handling of your vehicle and provide a smooth and safer ride. In addition, tire rotation extends the life of your tires.

When you are on the road anything could happen. You could break down and be stranded along the side of the road with your family. If this has never happened to you, then consider yourself fortunate. However, you should prepare yourself just in case you become disabled on the side of the road in Arlington, Texas. The following are some tools that will help you get back up and running safely