1) What reasons could explain why competitors are forcing the company to lower prices on its high-volume retail products? 2) Why do you believe the company charges less for custom order products than its competitors? 3) Does a company's costing method have any effect on its pricing decisions? Explain
Q: Utica Manufacturing (UM) was recently acquired by MegaMachines, Inc. (MM), and organized as a…
A: In Cost Accounting, Activity Based Costing (ABC) is a technique of overhead allocation where the…
Q: If Isaacson's continues to use the plantwide overhead rate, how much manufacturing overhead would…
A: Plantwide overhead rate = Total manufacturing overhead / Total labor hours
Q: Siegel Corporation manufactures a product available in both a deluxe and a regular model. The…
A: Manufacturing overheads are the indirect costs and expense related to production and manufacturing…
Q: The current cost accounting system charges overhead to products based on machine-hours. What unit…
A: ABC (Activity Based costing system): it is the method of allocating overhead cost to production…
Q: a. The current cost accounting system charges overhead to products based on machine-hours. What unit…
A: Calculation of Overhead Rate = Total overhead Cost ÷ Total Machine hours Total Machine Hours =…
Q: Hannah Gilpin is the controller ofBlakemore Auto Glass, a division of Eastern Glass and Window.…
A: First of all, we shall understand how the structure of Income statement is. Please see attached a…
Q: Isaacson's Fine Furnishings manufactures upscale custom furniture. Isaacson's currently uses a…
A: For answer 3, Isaacson uses the plantwide overhead rate which is calculated in part (1). The…
Q: was the total cost of Job 672? Group of answer choices $386 $486
A:
Q: Sheffield’s Nut House is a processor and distributor of a variety of different nuts. The company…
A: Cost Driver Rate = Total Cost incurred on ActivityActivity Base
Q: Jones Inc. is a manufacturer that uses traditional costing system to allocate overhead cost where…
A: Traditional absorption-based costing allocated costs based on a single cost factor which is…
Q: Please answer last subpart labeled D. Comment on Sterling's current cost system and the reason the…
A: Comment on Sterling's current cost system and the reason the company is facing fierce competition…
Q: XYZ Co. uses a 5,000 square foot factory space that it rents for $3,000 a month for all its…
A: The factory rent that would be assigned to the Machining cost pool is calculated as below: Rent…
Q: XYZ Co. uses a 5,000 square foot factory space that it rents for $3,000 a month for all its…
A: As per activity-based costing the total indirect cost is allocated to different departments based on…
Q: Victorious Company manufactures two types of Electronic Toy, the Regular and SuperPro. The following…
A: Overhead cost per activity = Total overhead cost for the activity / No. of activity
Q: COVID Co. uses a 5,000 square foot factory space that it rents for $2,500 a month for all its…
A: Factory overhead is defined as the costs incurred during the procedure of manufacturing, not…
Q: DK manufactures three products, W, X and Y. Each product uses the same materials and the same type…
A: The following concept is related to DK manufactures.
Q: Airflow Inc. produces ceiling fans for home and industrial use. The parts for the different styles…
A: “Since you have posted a question with multiple sub-parts, we will solve first three sub-parts for…
Q: Jones Inc. is a manufacturer that uses traditional costing system to allocate overhead cost where…
A: Compute overhead cost, unit product cost, and total product cost using the traditional method as…
Q: DK manufactures three products, W, X and Y. Each product uses the same materials and the same type…
A: As you have posted multiple independent questions, we are answering the first two questions. Kindly…
Q: Isaacson's Fine Furnishings manufactures upscale custom furniture. Isaacson's currently uses a…
A: Manufacturing Overheads:- Manufacturing overheads includes all the indirect costs which are incurred…
Q: Cut It Up, Inc., is a manufacturer of wooden cutting boards that are sold through a chain of kitchen…
A:
Q: Perez Manufacturing Company uses two departments to make its products. Department I is a cutting…
A: Overhead allocation means to allocate the overhead using the appropriate cost drivers.
Q: Wixis Cabinets makes custom wooden cabinets for high-end stereo systems from specialty woods. The…
A: Given information below
Q: DK manufactures three products, W, X and Y. Each product uses the same materials and the same type…
A: a) The full cost plus basis has an advantage that it gives higher profit and it recovers both…
Q: Isaacson's Fine Furnishings manufactures upscale custom furniture. Isaacson's currently uses a…
A: Predetermined overhead rate is the single plantwide overhead rate that will be used for allocation…
Q: Artopex is a manufacturing company that produces custom made furniture pieces made of real wood,…
A: Calculation of Manufacturing Overhead Allocation Rate of both the budgeted and the actual for the…
Q: Roasting $__________ roasting per hour Seasoning $__________ Seasoning per hour Packaging…
A: Activity rate = Budgeted cost/Budgeted Activity
Q: Arklan Production is upgrading its manufacturing process from a manual process to a highly automated…
A: Costing helps the management to make better decisions and correct quote prices to the customers.…
Q: Required:
A: The cost accounting can be defined as the huge branch under accounting which helps to record only…
Q: Utica Manufacturing (UM) was recently acquired by MegaMachines, Inc. (MM), and organized as a…
A: Note: Since you have posted a question with multiple sub-parts, we will solve first three subparts…
Q: The new initiative being piloted is to produce goods in-house instead of buying them from wholesale…
A: Gross profit is the amount of money a company gets from selling selling of products and facilities…
Q: DK manufactures three products, W, X and Y. Each product uses the same materials and the same type…
A: Activity based costing is a method of apportionment of overhead cost of production on the basis of…
Q: DK manufactures three products, W, X and Y. Each product uses the same materials and the same type…
A: Labor hour per unit W=Per unitPer hour=$4010=$4
Q: Isaacson's Fine Furnishings manufactures upscale custom furniture. Isaacson's currently uses a…
A: Overhead rate is the rate determined by dividing the total overheads by the total units of…
Q: For years, Tamarindo Company produced only one product: backpacks. Recently, Tamarindo added a line…
A:
Q: XYZ Co. uses a 5,000 square foot factory space that it rents for $3,500 a month for all its…
A: To calculate the amount of factory rent that should be allocated to Finishing cost pool, first we…
Q: Isaacson's Fine Furnishings manufactures upscale custom furniture. Isaacson's currently uses a…
A: Part 2:
Q: Using ABC, the total manufacturing costs per unit for product SuperPro is:
A: Using activity based costing, the overhead is applied on the basis of predetermined overhead rate.
Q: XYZ Co.uses a 5,000 square foot factory space that it rents for $3,000 a month for all its…
A: Activity-based costing is an approach of assigning overhead costs to the products depending on the…
Q: DK manufactures three products, W, X and Y. Each product uses the same materials and the same type…
A: Under the traditional costing system, overheads are allocated on the basis of a single basis while…
Q: DK manufactures three products, W, X and Y. Each product uses the same materials and the same type…
A: Marginal cost plus pricing: Marginal cost plus pricing is used to fix prices using the variable…
Q: DK manufactures three products, W, X and Y. Each product uses the same materials and the same type…
A: Costing method is a method in which the total cost of the product is calculated.
Q: DK manufactures three products, W, X and Y. Each product uses the same materials and the same type…
A: Costing method refers to the method used to calculate the total costs of the product.
Q: Using ABC, the total manufacturing costs for product Regular is:
A: Overhead cost per activity = Total overhead cost for the activity / No. of activity
Q: XYZ Co. uses a 5,000 square foot factory space that it rents for $3,500 a month for all its…
A: Activity rate = Total rent / Total no. of activity = $3500 / 5000 square foot = $0.70 per square…
Q: Utica Manufacturing (UM) was recently acquired by MegaMachines, Inc. (MM), and organized as a…
A: A) Calculation of predetermined Overhead rate = Total Cost / Machine Hours Total Cost = $154,000 +…
Q: A company manufactures luxury watches made with high-end design materials. The company uses a…
A: Traditional absorption-based costing allocated costs based on a single cost factor which is…
Q: DK manufactures three products, W, X and Y. Each product uses the same materials and the same type…
A: a) Marginal plus pricing Advantages: 1. More profit: Under the marginal costing, the focus of the…
Q: Hannah Gilpin is the controller ofBlakemore Auto Glass, a division of Eastern Glass and Window.…
A: Cost of goods sold: Cost of goods sold is the accumulate total of all direct cost incurred in…
Q: Sylar Company manufactures a product that is available in both a Deluxe model and a Regular model.…
A: Calvulation of manufacturing overhead rate per Direct Labour Hour:: Manufacturing overhead…
Process Costing
Process costing is a sort of operation costing which is employed to determine the value of a product at each process or stage of producing process, applicable where goods produced from a series of continuous operations or procedure.
Job Costing
Job costing is adhesive costs of each and every job involved in the production processes. It is an accounting measure. It is a method which determines the cost of specific jobs, which are performed according to the consumer’s specifications. Job costing is possible only in businesses where the production is done as per the customer’s requirement. For example, some customers order to manufacture furniture as per their needs.
ABC Costing
Cost Accounting is a form of managerial accounting that helps the company in assessing the total variable cost so as to compute the cost of production. Cost accounting is generally used by the management so as to ensure better decision-making. In comparison to financial accounting, cost accounting has to follow a set standard ad can be used flexibly by the management as per their needs. The types of Cost Accounting include – Lean Accounting, Standard Costing, Marginal Costing and Activity Based Costing.
Xylon company manufactures custom made furniture for the local market and produces a line of home furnishings sold in retail stores across the country. the company uses traditional volume based methods of assigning direct materials and direct labor to its product line. overhead has always been assigned by using a plant-wide overhead rate based on direct labor hours. In the past few years, management has seen its line of retail products continue to sell at high volumes, but competition has forced it to lower prices on these items. The prices are declining to a level close to its cost of production.
Meanwhile, it's custom made furniture is in high demand, and customers have commented on its favorable (lower) prices compared to its competitors. Management is considering dropping its line of retail products and devoting all of its resources to custom made furniture.
1) What reasons could explain why competitors are forcing the company to lower prices on its high-volume retail products?
2) Why do you believe the company charges less for custom order products than its competitors?
3) Does a company's costing method have any effect on its pricing decisions? Explain
4) Aside from the differences in volume of output, what production differences do you believe exists between making custom order furniture and mass market furnishings?
5) What information might the company obtain from using ABC that it might not obtain using volume based costing methods?
Trending now
This is a popular solution!
Step by step
Solved in 2 steps with 2 images
- Mott Company recently implemented a JIT manufacturing system. After one year of operation, Heidi Burrows, president of the company, wanted to compare product cost under the JIT system with product cost under the old system. Motts two products are weed eaters and lawn edgers. The unit prime costs under the old system are as follows: Under the old manufacturing system, the company operated three service centers and two production departments. Overhead was applied using departmental overhead rates. The direct overhead costs associated with each department for the year preceding the installation of JIT are as follows: Under the old system, the overhead costs of the service departments were allocated directly to the producing departments and then to the products passing through them. (Both products passed through each producing department.) The overhead rate for the Machining Department was based on machine hours, and the overhead rate for assembly was based on direct labor hours. During the last year of operations for the old system, the Machining Department used 80,000 machine hours, and the Assembly Department used 20,000 direct labor hours. Each weed eater required 1.0 machine hour in Machining and 0.25 direct labor hour in Assembly. Each lawn edger required 2.0 machine hours in Machining and 0.5 hour in Assembly. Bases for allocation of the service costs are as follows: Upon implementing JIT, a manufacturing cell for each product was created to replace the departmental structure. Each cell occupied 40,000 square feet. Maintenance and materials handling were both decentralized to the cell level. Essentially, cell workers were trained to operate the machines in each cell, assemble the components, maintain the machines, and move the partially completed units from one point to the next within the cell. During the first year of the JIT system, the company produced and sold 20,000 weed eaters and 30,000 lawn edgers. This output was identical to that for the last year of operations under the old system. The following costs have been assigned to the manufacturing cells: Required: 1. Compute the unit cost for each product under the old manufacturing system. 2. Compute the unit cost for each product under the JIT system. 3. Which of the unit costs is more accurate? Explain. Include in your explanation a discussion of how the computational approaches differ. 4. Calculate the decrease in overhead costs under JIT, and provide some possible reasons that explain the decrease.Brees, Inc., a manufacturer of golf carts, has just received an offer from a supplier to provide 2,600 units of a component used in its main product. The component is a track assembly that is currently produced internally. The supplier has offered to sell the track assembly for 66 per unit. Brees is currently using a traditional, unit-based costing system that assigns overhead to jobs on the basis of direct labor hours. The estimated traditional full cost of producing the track assembly is as follows: Prior to making a decision, the companys CEO commissioned a special study to see whether there would be any decrease in the fixed overhead costs. The results of the study revealed the following: 3 setups1,160 each (The setups would be avoided, and total spending could be reduced by 1,160 per setup.) One half-time inspector is needed. The company already uses part-time inspectors hired through a temporary employment agency. The yearly cost of the part-time inspectors for the track assembly operation is 12,300 and could be totally avoided if the part were purchased. Engineering work: 470 hours, 45/hour. (Although the work decreases by 470 hours, the engineer assigned to the track assembly line also spends time on other products, and there would be no reduction in his salary.) 75 fewer material moves at 30 per move. Required: 1. Ignore the special study, and determine whether the track assembly should be produced internally or purchased from the supplier. 2. Now, using the special study data, repeat the analysis. 3. Discuss the qualitative factors that would affect the decision, including strategic implications. 4. After reviewing the special study, the controller made the following remark: This study ignores the additional activity demands that purchasing would cause. For example, although the demand for inspecting the part on the production floor decreases, we may need to inspect the incoming parts in the receiving area. Will we actually save any inspection costs? Is the controller right?Evans, Inc., has a unit-based costing system. Evanss Miami plant produces 10 different electronic products. The demand for each product is about the same. Although they differ in complexity, each product uses about the same labor time and materials. The plant has used direct labor hours for years to assign overhead to products. To help design engineers understand the assumed cost relationships, the Cost Accounting Department developed the following cost equation. (The equation describes the relationship between total manufacturing costs and direct labor hours; the equation is supported by a coefficient of determination of 60 percent.) Y=5,000,000+30X,whereX=directlaborhours The variable rate of 30 is broken down as follows: Because of competitive pressures, product engineering was given the charge to redesign products to reduce the total cost of manufacturing. Using the above cost relationships, product engineering adopted the strategy of redesigning to reduce direct labor content. As each design was completed, an engineering change order was cut, triggering a series of events such as design approval, vendor selection, bill of materials update, redrawing of schematic, test runs, changes in setup procedures, development of new inspection procedures, and so on. After one year of design changes, the normal volume of direct labor was reduced from 250,000 hours to 200,000 hours, with the same number of products being produced. Although each product differs in its labor content, the redesign efforts reduced the labor content for all products. On average, the labor content per unit of product dropped from 1.25 hours per unit to one hour per unit. Fixed overhead, however, increased from 5,000,000 to 6,600,000 per year. Suppose that a consultant was hired to explain the increase in fixed overhead costs. The consultants study revealed that the 30 per hour rate captured the unit-level variable costs; however, the cost behavior of other activities was quite different. For example, setting up equipment is a step-fixed cost, where each step is 2,000 setup hours, costing 90,000. The study also revealed that the cost of receiving goods is a function of the number of different components. This activity has a variable cost of 2,000 per component type and a fixed cost that follows a step-cost pattern. The step is defined by 20 components with a cost of 50,000 per step. Assume also that the consultant indicated that the design adopted by the engineers increased the demand for setups from 20,000 setup hours to 40,000 setup hours and the number of different components from 100 to 250. The demand for other non-unit-level activities remained unchanged. The consultant also recommended that management take a look at a rejected design for its products. This rejected design increased direct labor content from 250,000 hours to 260,000 hours, decreased the demand for setups from 20,000 hours to 10,000 hours, and decreased the demand for purchasing from 100 component types to 75 component types, while the demand for all other activities remained unchanged. Required: 1. Using normal volume, compute the manufacturing cost per labor hour before the year of design changes. What is the cost per unit of an average product? 2. Using normal volume after the one year of design changes, compute the manufacturing cost per hour. What is the cost per unit of an average product? 3. Before considering the consultants study, what do you think is the most likely explanation for the failure of the design changes to reduce manufacturing costs? Now use the information from the consultants study to explain the increase in the average cost per unit of product. What changes would you suggest to improve Evanss efforts to reduce costs? 4. Explain why the consultant recommended a second look at a rejected design. Provide computational support. What does this tell you about the strategic importance of cost management?
- Southward Company has implemented a JIT flexible manufacturing system. John Richins, controller of the company, has decided to reduce the accounting requirements given the expectation of lower inventories. For one thing, he has decided to treat direct labor cost as a part of overhead and to discontinue the detailed direct labor accounting of the past. The company has created two manufacturing cells, each capable of producing a family of products: the radiator cell and the water pump cell. The output of both cells is sold to a sister division and to customers who use the radiators and water pumps for repair activity. Product-level overhead costs outside the cells are assigned to each cell using appropriate drivers. Facility-level costs are allocated to each cell on the basis of square footage. The budgeted direct labor and overhead costs are as follows: The predetermined conversion cost rate is based on available production hours in each cell. The radiator cell has 45,000 hours available for production, and the water pump cell has 27,000 hours. Conversion costs are applied to the units produced by multiplying the conversion rate by the actual time required to produce the units. The radiator cell produced 81,000 units, taking 0.5 hour to produce one unit of product (on average). The water pump cell produced 90,000 units, taking 0.25 hour to produce one unit of product (on average). Other actual results for the year are as follows: All units produced were sold. Any conversion cost variance is closed to Cost of Goods Sold. Required: 1. Calculate the predetermined conversion cost rates for each cell. 2. Prepare journal entries using backflush accounting. Assume two trigger points, with completion of goods as the second trigger point. 3. Repeat Requirement 2, assuming that the second trigger point is the sale of the goods. 4. Explain why there is no need to have a work-in-process inventory account. 5. Two variants of backflush costing were presented in which each used two trigger points, with the second trigger point differing. Suppose that the only trigger point for recognizing manufacturing costs occurs when the goods are sold. How would the entries be listed here? When would this backflush variant be considered appropriate?Big Mikes, a large hardware store, has gathered data on its overhead activities and associated costs for the past 10 months. Nizam Sanjay, a member of the controllers department, believes that overhead activities and costs should be classified into groups that have the same driver. He has decided that unloading incoming goods, counting goods, and inspecting goods can be grouped together as a more general receiving activity, since these three activities are all driven by the number of receiving orders. The 10 months of data shown below have been gathered for the receiving activity. Required: 1. Prepare a scattergraph, plotting the receiving costs against the number of purchase orders. Use the vertical axis for costs and the horizontal axis for orders. 2. Select two points that make the best fit, and compute a cost formula for receiving costs. 3. Using the high-low method, prepare a cost formula for the receiving activity. 4. Using the method of least squares, prepare a cost formula for the receiving activity. What is the coefficient of determination?Anderson Company has the following departmental manufacturing structure for one of its products: After some study, the production manager of Anderson recommended the following revised cellular manufacturing approach: Required: 1. Calculate the total time it takes to produce a batch of 20 units using Andersons traditional departmental structure. 2. Using cellular manufacturing, how much time is saved producing the same batch of 20 units? Assuming the cell operates continuously, what is the production rate? Which process controls this production rate? 3. What if the processing times of molding, welding, and assembly are all reduced to six minutes each? What is the production rate now, and how long will it take to produce a batch of 20 units?
- Ingles Corporation is a manufacturer of tables sold to schools, restaurants, hotels, and other institutions. The table tops are manufactured by Ingles, but the table legs are purchased from an outside supplier. The Assembly Department takes a manufactured table top and attaches the four purchased table legs. It takes 16 minutes of labor to assemble a table. The company follows a policy of producing enough tables to ensure that 40 percent of next months sales are in the finished goods inventory. Ingles also purchases sufficient materials to ensure that materials inventory is 60 percent of the following months scheduled production. Ingless sales budget in units for the next quarter is as follows: Ingless ending inventories in units for July 31 are as follows: Required: 1. Calculate the number of tables to be produced during August. 2. Disregarding your response to Requirement 1, assume the required production units for August and September are 2,100 and 1,900, respectively, and the July 31 materials inventory is 4,000 units. Compute the number of table legs to be purchased in August. 3. Assume that Ingles Corporation will produce 2,340 units in September. How many employees will be required for the Assembly Department in September? (Fractional employees are acceptable since employees can be hired on a part-time basis. Assume a 40-hour week and a 4-week month.) (CMA adapted)Bucknum Boys, Inc., produces hunting gear for buck hunting. The companys main production departments are Molding and Finishing. Production of the hunting gear cannot be accomplished without the supporting tasks of Materials Management and meals for production employees provided by the Cafeteria. Cafeteria costs are always higher than Materials Management costs. The company believes that the number of employees in each department is the best driver of Cafeteria costs. The number of employees in each department is as follows: The company also believes that the value of support materials used in each department is the best driver for Materials Management costs. The support materials used in the Molding and Finishing departments are valued at 1,800 and 2,700, respectively. Using the sequential method for support department cost allocation (allocating Cafeteria costs first), determine (a) the percentage of Cafeteria costs that should be allocated to the Molding Department and (b) the percentage of Materials Management costs that should be allocated to the Finishing Department.Paul Golding and his wife, Nancy, established Crunchy Chips in 1938. Over the past 60 years, the company has established distribution channels in 11 western states, with production facilities in Utah, New Mexico, and Colorado. In 1980, Pauls son, Edward, took control of the business. By 2017, it was clear that the companys plants needed to gain better control over production costs to stay competitive. Edward hired a consultant to install a standard costing system. To help the consultant establish the necessary standards, Edward sent her the following memo: The manufacturing process for potato chips begins when the potatoes are placed into a large vat in which they are automatically washed. After washing, the potatoes flow directly to an automatic peeler. The peeled potatoes then pass by inspectors, who manually cut out deep eyes or other blemishes. After inspection, the potatoes are automatically sliced and dropped into the cooking oil. The frying process is closely monitored by an employee. After the chips are cooked, they pass under a salting device and then pass by more inspectors, who sort out the unacceptable finished chips (those that are discolored or too small). The chips then continue on the conveyor belt to a bagging machine that bags them in 1-pound bags. After bagging, the bags are placed in a box and shipped. The box holds 15 bags. The raw potato pieces (eyes and blemishes), peelings, and rejected finished chips are sold to animal feed producers for 0.16 per pound. The company uses this revenue to reduce the cost of potatoes. We would like this reflected in the price standard relating to potatoes. Crunchy Chips purchases high-quality potatoes at a cost of 0.245 per pound. Each potato averages 4.25 ounces. Under efficient operating conditions, it takes four potatoes to produce one 16-ounce bag of plain chips. Although we label bags as containing 16 ounces, we actually place 16.3 ounces in each bag. We plan to continue this policy to ensure customer satisfaction. In addition to potatoes, other raw materials are the cooking oil, salt, bags, and boxes. Cooking oil costs 0.04 per ounce, and we use 3.3 ounces of oil per bag of chips. The cost of salt is so small that we add it to overhead. Bags cost 0.11 each and boxes 0.52 each. Our plant produces 8.8 million bags of chips per year. A recent engineering study revealed that we would need the following direct labor hours to produce this quantity if our plant operates at peak efficiency: Im not sure that we can achieve the level of efficiency advocated by the study. In my opinion, the plant is operating efficiently for the level of output indicated if the hours allowed are about 10% higher. The hourly labor rates agreed upon with the union are: Overhead is applied on the basis of direct labor dollars. We have found that variable overhead averages about 116% of our direct labor cost. Our fixed overhead is budgeted at 1,135,216 for the coming year. Required: 1. Discuss the benefits of a standard costing system for Crunchy Chips. 2. Discuss the presidents concern about using the result of the engineering study to set the labor standards. What standard would you recommend? 3. Form a group with two or three other students. Develop a standard cost sheet for Crunchy Chips plain potato chips. Round all computations to four decimal places. 4. Suppose that the level of production was 8.8 million bags of potato chips for the year as planned. If 9.5 million pounds of potatoes were used, compute the materials usage variance for potatoes.
- Young Company is beginning operations and is considering three alternatives to allocate manufacturing overhead to individual units produced. Young can use a plantwide rate, departmental rates, or activity-based costing. Young will produce many types of products in its single plant, and not all products will be processed through all departments. In which one of the following independent situations would reported net income for the first year be the same regardless of which overhead allocation method had been selected? a. All production costs approach those costs that were budgeted. b. The sales mix does not vary from the mix that was budgeted. c. All manufacturing overhead is a fixed cost. d. All ending inventory balances are zero.Posavek is a wholesale supplier of building supplies building contractors, hardware stores, and home-improvement centers in the Boston metropolitan area. Over the years, Posavek has expanded its operations to serve customers across the nation and now employs over 200 people as technical representatives, buyers, warehouse workers, and sales and office staff. Most recently, Posavek has experienced fierce competition from the large online discount stores. In addition, the company is suffering from operational inefficiencies related to its archaic information system. Posavek revenue cycle procedures are described in the following paragraphs. Revenue Cycle Posaveks sales department representatives receive orders via traditional mail, e-mail, telephone, and the occasional walk-in customer. Because Posavek is a wholesaler, the vast majority of its business is conducted on a credit basis. The process begins in the sales department, where the sales clerk enters the customers order into the centralized computer sales order system. The computer and file server are housed in Posaveks small data processing department. If the customer has done business with Posavek in the past, his or her data are already on file. If the customer is a first-time buyer, however, the clerk creates a new record in the customer account file. The system then creates a record of the transaction in the open sales order file. When the order is entered, an electronic copy of it is sent to the customers e-mail address as confirmation. A clerk in the warehouse department periodically reviews the open sales order file from a terminal and prints two copies of a stock release document for each new sale, which he uses to pick the items sold from the shelves. The warehouse clerk sends one copy of the stock release to the sales department and the second copy, along with the goods, to the shipping department. The warehouse clerk then updates the inventory subsidiary file to reflect the items and quantities shipped. Upon receipt of the stock release document, the sales clerk accesses the open sales order file from a terminal, closes the sales order, and files the stock release document in the sales department. The sales order system automatically posts these transactions to the sales, inventory control, and cost-of-goods-sold accounts in the general ledger file. Upon receipt of the goods and the stock release, the shipping department clerk prepares the goods for shipment to the customer. The clerk prepares three copies of the bill of lading. Two of these go with the goods to the carrier and the third, along with the stock release document, is filed in the shipping department. The billing department clerk reviews the closed sales orders from a terminal and prepares two copies of the sales invoice. One copy is mailed to the customer, and the other is filed in the billing department. The clerk then creates a new record in the accounts receivable subsidiary file. The sales order system automatically updates the accounts receivable control account in the general ledger file. CASH RECEIPTS PROCEDURES Mail room clerks open customer cash receipts, reviews the check and remittance advices for completeness, and prepares two copies of a remittance list. One copy is sent with the checks to the cash receipts department. The second copy of the remittance advices are sent to the billing department. When the cash receipts clerk receives the checks and remittance list, he verifies the checks received against those on the remittance list and signs the checks For Deposit Only. Once the checks are endorsed, he records the receipts in the cash receipts journal from his terminal. The clerk then fills out a deposit slip and deposits the checks in the bank. Upon receipt of the remittances, the billing department clerk records the amounts in the accounts receivable subsidiary ledger from the department terminal. The system automatically updates the AR control account in the general ledger Posavek has hired your public accounting firm to review its sales order procedures for internal control compliance and to make recommendations for changes. Required a. Create a data flow diagram of the current system. b. Create a system flowchart of the existing system. c. Analyze the physical internal control weaknesses in the system. d. (Optional) Prepare a system flowchart of a redesigned computer-based system that resolves the control weaknesses that you identified. Explain your solution.Leather Works is a family-owned maker of leather travel bags and briefcases located in the northeastern part of the United States. Foreign competition has forced its owner, Heather Gray, to explore new ways to meet the competition. One of her cousins, Wallace Hayes, who recently graduated from college with a major in accounting, told her about the use of cost variance analysis to learn about efficiencies of production. In May of last year, Heather asked Matt Jones, chief accountant, and Alfred Prudest, production manager, to implement a standard costing system. Matt and Alfred, in turn, retained Shannon Leikam, an accounting professor at Hardings College, to set up a standard costing system by using information supplied to her by Matts and Alfreds staff. To verify that the information was accurate, Shannon visited the plant and measured workers output using time and motion studies. During those visits, she was not accompanied by either Matt or Alfred, and the workers knew about Shannons schedule in advance. The cost system was implemented in June of last year. Recently, the following dialogue took place among Heather, Matt, and Alfred: HEATHER: How is the business performing? ALFRED: You know, we are producing a lot more than we used to, thanks to the contract that you helped obtain from Lean, Inc., for laptop covers. (Lean is a national supplier of computer accessories.) MATT: Thank goodness for that new product. It has kept us from sinking even more due to the inroads into our business made by those foreign suppliers of leather goods. HEATHER: What about the standard costing system? MATT: The variances are mostly favorable, except for the first few months when the supplier of leather started charging more. HEATHER: How did the union members take to the standards? ALFRED: Not bad. They grumbled a bit at first, but they have taken it in stride. Weve consistently shown favorable direct labor efficiency variances and direct materials usage variances. The direct labor rate variance has been flat. MATT: It should be since direct labor rates are negotiated by the union representative at the start of the year and remain the same for the entire year. HEATHER: Matt, would you send me the variance report for laptop covers immediately? The following chart summarizes the direct materials and direct labor variances from November of last year through April of this year (extracted from the report provided by Matt). Standards for each laptop cover are as follows: a. Three feet of direct materials at 7.50 per foot b. Forty-five minutes of direct labor at 14 per hour In addition, the data for May of this year, but not the variances for the month, are as follows: Actual direct labor cost per hour exceeded the budgeted rate by 0.10 per hour. Required: 1. For May of this year, calculate the price and quantity variances for direct labor and direct materials. 2. Discuss the trend of the direct materials and labor variances. 3. What type of actions must the workers have taken during the period they were being observed for the setting of standards? 4. What can be done to ensure that the standards are set correctly? (CMA adapted)