13.30 A 10-kg block is attached to spring A and connected to spring B by a cord and pulley. The block is held in the position shown with both springs unstretched when the support is removed and the block is released with no initial velocity. Knowing that the constant of each spring is 2 kN/m, determine (a) the velocity of the block after it has moved down 50 mm, (b) the maximum velocity achieved by the block. k = 2 kN/m B wwwwwww 10 kg A C k = 2 kN/m

13.30 A 10-kg block is attached to spring A and connected to spring B by a cord and pulley. The block is held in the position shown with both springs unstretched when the support is removed and the block is released with no initial velocity. Knowing that the constant of each spring is 2 kN/m, determine (a) the velocity of the block after it has moved down 50 mm, (b) the maximum velocity achieved by the block. k = 2 kN/m B wwwwwww 10 kg A C k = 2 kN/m

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

It is shown in mechanics of materials that the stiffness of an elastic cable is k=AE It is shown in mechanics of materials that the stiffness of an elastic cable is L, where A is the cross-sectional area of the cable, E is the modulus of elasticity, and L is the length of the cable. A winch is lowering a 4000-lb piece of machinery using a constant speed of 3 ft/s when the winch suddenly stops. Knowing that the steel cable has a diameter of 0.4 in., E = 29 × 106 lb/in2, and when the winch stops L = 30 ft, determine the maximum downward displacement of the piece of machinery from the point it was when the winch stopped.
An 8-kg cylinder C rests on a 4-kg platform A supported by a cord that passes over the pulleys D and E and is attached to a 4-kg block B. Knowing that the system is released from rest, determine (a) the velocity of block B after 0.8 s, (b) the force exerted by the cylinder on the platform.
The brakes of a car are applied, causing it to slow down at a rate of 4.45 m/sec2. Knowing that the car stops in 54 m, determine the time required for the car to stop.
A stone is thrown vertically upward from a point on a bridge located 40 m above the water. Knowing that it strikes the water 4 s after release, determine (a) the speed with which the stone was thrown upward, (b) the speed with which the stone strikes the water.
Packages are thrown down an incline at A with a velocity of 1 m/s. The packages slide along the surface ABC to a conveyor belt which moves with a velocity of 2 m/s. Knowing that μk = 0.25 between the packages and the surface ABC , determine the distance d if the packages are to arrive at C with a velocity of 2 m/s.
In anticipation of a long 7° upgrade, a bus driver accelerates at a constant rate of 3 ft/s2 while still on a level section of the highway. Knowing that the speed of the bus is 60 mi/h as it begins to climb the grade and that the driver does not change the setting of his throttle or shift gears, determine the distance traveled by the bus up the grade when its speed has decreased to 50 mi/h.
The 3-kg collar B slides on the frictionless arm AA’. The arm is attached to drum D and rotates about O in a horizontal plane at the rate 0=0.75t, where 0 and t are expressed in rad/s and seconds, respectively. As the arm-drum assembly rotates, a mechanism within the drum releases cord so that the collar moves outward from O with a constant speed of 0.5 m/s. Knowing that at t= 0, r= 0, determine the time at which the tension in the cord is equal to the magnitude of the horizontal force exerted on B by arm AA,.
Packages are thrown down an incline at A with a velocity of 1 m/s. The packages slide along the surface ABC to a conveyor belt which moves with a velocity of 2 m/s. Knowing that d= 7.5 m and μk = 0.25 between the packages and all surfaces, determine (a) the speed of the package at C, (b) the distance a package will slide on the conveyor belt before it comes to rest relative to the belt.
A spring AB of constant k is attached to a support at A and to a collar of mass m. The unstretched length of the spring is 1 . Knowing that the collar is released from rest at x=x0 and neglecting friction between the collar and the horizontal rod, determine the magnitude of the velocity of the collar as it passes through point C.
The system shown starts from rest, and the length of the upper cord is adjusted so that A, B, and C, are initially at the same level. Each component moves with a constant acceleration, and after 2 s the relative change in position of block C with respect to block A is 280 mm upward. Knowing that when the relative velocity of collar B with respect to block A is 80 mm/s downward, the displacements of A and B are 160 mm downward and 320 mm downward, respectively, determine (a) the accelerations of A and B if a B > 10 mm/s2 , (b) the change in position of block D when the velocity of block C is 600 mm/s upward.
A rocket weighs 2600 lb, including 2200 lb of fuel, which is consumed at the rate of 25 lb/s and ejected with a relative velocity of 13,000 ft/s. Knowing that the rocket is fired vertically from the ground, determine (a) its acceleration as it is fired, (b) its acceleration as the last particle of fuel is being consumed, (c) the altitude at which all the fuel has been consumed, (d) the velocity of the rocket at that time.
An advanced spatial disorientation trainer allows the cab to rotate around multiple axes as well as to extend inwards and outwards. It can be used to simulate driving, fixed-wing aircraft flying, and helicopter maneuvering. In one training scenario, the trainer rotates and translates in the horizontal plane where the location of the pilot is defined by the relationships where r,0, and t are expressed in feet, radians, and seconds, respectively. Knowing that the pilot has a weight of 175 lbs, (a) determine the magnitude of the resulting force acting on the pilot at t= 5 s, (b) plot the magnitudes of the radial and transverse components of the force exerted on the pilot from 0 to 10 seconds.