14) There is the process denoted by the attached figure, which seeks to take a compound from vapor at 225 K and 0.1 MPa to saturated liquid at 0.1 MPa (Tsat = 150K). The enthalpies of the compound in the gas phase are given by table 1. Furthermore, the saturated liquid at 0.1 MPa has an enthalpy of 20 kJ / kg. Consider that the flash separator operates at 0.1 MPa. 1:T= 225 K, P = 0.1 MPa 2: T = 200, P = 10 MPa 3: T = 175 K 4: Vap. he sat. 6: Liq .sat. w-300 KW 4 5 Separador Flash 2 3 Intercambiador Tabla 1: Propiedades del compuesto en fase gaseosa 150 K 175 к 200 к | 225 к 250к | 275 K 0.1 MPa 200 215 230 245 260 275 1 MPа 192 202 215 229 241 258 10 MPa 184 190 200 215 228 241 If current 1 is 50 kg / s, what is the value of Q? Your answer should be in kW

14) There is the process denoted by the attached figure, which seeks to take a compound from vapor at 225 K and 0.1 MPa to saturated liquid at 0.1 MPa (Tsat = 150K). The enthalpies of the compound in the gas phase are given by table 1. Furthermore, the saturated liquid at 0.1 MPa has an enthalpy of 20 kJ / kg. Consider that the flash separator operates at 0.1 MPa. 1:T= 225 K, P = 0.1 MPa 2: T = 200, P = 10 MPa 3: T = 175 K 4: Vap. he sat. 6: Liq .sat. w-300 KW 4 5 Separador Flash 2 3 Intercambiador Tabla 1: Propiedades del compuesto en fase gaseosa 150 K 175 к 200 к | 225 к 250к | 275 K 0.1 MPa 200 215 230 245 260 275 1 MPа 192 202 215 229 241 258 10 MPa 184 190 200 215 228 241 If current 1 is 50 kg / s, what is the value of Q? Your answer should be in kW

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Saturated water at 36.6°C passes through a throttling valve and becomes a mixture of water and steam at 5.4°C. Calculate the specific volume and specific enthalpy of the mixture. Show detailed steps of how the properties are obtained by using only the Saturated Water and Steam table. Consider that a throttling process is a typical irreversible process. The specific enthalpies of the working fluid before and after a throttling valve are the same. The steam table has been provided in the image
Refrigerant 134a (R134a) is in vapor/liquid equilibrium at 200 K. The saturation pressure is 7.0282 bar, the enthalpy of the saturated liquid is 107.39 kJ/kg and the enthalpy of the saturated vapor is 353.06 kJ/kg. Compute the entropy of vaporization in units of kJ/(kg K). Report your answer using three decimal places.
Identify if the following phase is saturated, subcooled, superheated, or wet-mixture. Temp Specific Entropy Phase C kJ/kg-K 202 5.798 ?
I need help with some review problems! thank you Steam at 440K, 100kPa, with a mass flow rate of 0.164kg/s enters an adiabatic mixing chamber and mixes with 10.00 kg/s of water entering at 325 K, 100 kPa to produce an exit stream of water at 100 kPa. Assuming a steady state steady flow process, USE THE ATTACHED H2O TABLES to determine: a) The mass flow rate (kg/s) at the exit.b) The water exit temperature (K).c) The exit velocity (m/s) if the circular exit pipe diameter is 0.03m.
Refrigerant 134a (R134a) is at vapor/liquid equilibrium at 300 K. The saturation pressure is 7.0282 bar, the entropy of the saturated liquid is 1.1287 J/(g K) and the entropy of the saturated vapor is 1.7156 J/(g K). If the system has a an entropy of 1.38 J/(g K), what is the quality? (That is, what fraction of the system is vapor?) Report your answer to three decimal places.
Identify if the following phase is saturated, subcooled, superheated, or wet-mixture. Pressure Internal Energy Phase MPa kJ/kg 3 1710 ?
Steam at a pressure of 20 bar and a temperature of 300 oC flows in a pipe at a mass flow rate of 2 kg/s is throttled to a pressure of 8 bar before entering a mixing venturi to mix with another supply of steam at 8 bar and a dryness fraction of 0.9 with a mass flow rate of 5 kg/s. Sketch a diagram showing the arrangement and calculate the quality of the steam at the exit of the venturi after mixing.Calculate the internal diameter of the pipe to transport the steam before the throttle valve if its velocity is limited to 15 m/s.
Moist air enters a duct at 10 °C, 80 % RH, and a volumetric flow rate of 150 m3/min. The mixture is heated as it flows through the duct and exits at 30 °C. No moisture is added or removed, and the mixture pressure remains approximately constant at 1 bar. For steady-state operation; sketch on T – s diagram the heating process
What is deltaG for the throttling step in kJ/kg?
Water vapor enters an adiabatic turbine at a pressure of 20 MPa and a temperature of 650 oC, with a flow rate of 2 kg / s, and expands to a pressure of 0.2 MPa. The isentropic efficiency of the turbine is 0.75. a) Calculate the temperature of the steam at the turbine outlet. b) Which phases are in Case 1 and 2 and what tables were used? c) Calculate the power of the turbine.
In refrigeration and cryogenic plant for liquid oxygen production, what part of the components is the compressor, condenser, expansion valve, evaporator? Elaborate. Is the precooling process is the condenser? does the distillation column separates the liquid into gas? Can you present a PH and TS diagram for that?
A vessel of 1.5 m3 capacity contains oxygen at 7 bar and 40°C. The vessel is connected to another vesselof 3 m3 capacity containing carbon monoxide at 1 bar and 15°C. A connecting valve is opened and the gases mix adiabatically. Calculate : (i) The final temperature and pressure of the mixture. (ii) The changein entropy of the system.Assume : For oxygen Cv= 21.07 kJ/mole KFor carbon monoxide Cv= 20.86 kJ/mole K.