2. a. Analyze the following MIPS code and find out what exactly it is doing. Explaining what each MIPS instruction does literally is not enough, you need to explain how it contributes to the overall logic. adddu St1, St2, St3 nor St4, St2, Szero sltu St5, St4, St3 bne St5, Szero, exception1_processing What is the specific exception that is being processed at the label exception1_processing? Indicate with a diagram how a very simplified implementation of the same logic is possible in b. hardware. c. Explain with a flow chart and architecture diagram hardware efficient division algorithm may be performed d. Explain why massively parallel implementation of the division algorithm not possible?

2. a. Analyze the following MIPS code and find out what exactly it is doing. Explaining what each MIPS instruction does literally is not enough, you need to explain how it contributes to the overall logic. adddu St1, St2, St3 nor St4, St2, Szero sltu St5, St4, St3 bne St5, Szero, exception1_processing What is the specific exception that is being processed at the label exception1_processing? Indicate with a diagram how a very simplified implementation of the same logic is possible in b. hardware. c. Explain with a flow chart and architecture diagram hardware efficient division algorithm may be performed d. Explain why massively parallel implementation of the division algorithm not possible?

Name: 2. a. Analyze the following MIPS code and find out what exactly it is
Uploaded: 2024-03-20T06:51:23.000Z
Channel: Bartleby
Description: 2. a. Analyze the following MIPS code and find out what exactly it is doing. Explaining what eachMIPS instruction does literally is not enough, you need to explain how it contributes to theoverall logic.adddu $t1, $t2, $t3nor $t4, $t2, Szerosltu St5

Database System Concepts

7th Edition

ISBN:9780078022159

Author:Abraham Silberschatz Professor, Henry F. Korth, S. Sudarshan

Publisher:Abraham Silberschatz Professor, Henry F. Korth, S. Sudarshan

Chapter1: Introduction

Section: Chapter Questions

Problem 1PE

See similar textbooks

Similar questions

can you please fix the code to resolve the error:Oh no! You've got an error in your assembly code and meet the requirements: at line 5: expected GETC instruction to have exactly 0 operands, but found 2 .ORIG x3000 ; Define constantsBLANK .FILL x0020 ; Blank characterGETC .FILL x20B0 ; GETC trap codePUTS .FILL x22A0 ; PUTS trap codeHALT .FILL x25C0 ; HALT trap code ; Define variablesARRAY .BLKW #20 ; Array to store user inputsN .FILL #0 ; Size of the arrayCOUNT .FILL #0 ; Loop counterINPUT .FILL #0 ; User input ; Prompt messagePROMPT .STRINGZ "Enter a number (0 to 9): " ; Start of program LD R0, N ; Load the size of the array into R0 ADD R0, R0, #-1 ; Subtract 1 from the size to use as a loop counter ADD R0, R0, R0 ; Multiply the loop counter by 2 (each entry is 2 bytes) LOOP LEA R1, PROMPT ; Load the address of the prompt message into R1 PUTS ; Display the…
[Note: You are allowed to use only instructions implemented by the actual MIPS hardwareprovided in attached photos below. Use assembly language format from the references orthe book. Note, base ten numbers are listed as normal (e.g. 23), binary numbers areprefixed with 0b and hexadecimal numbers are prefixed with 0x.] Write a C program and corresponding assembly program based on MIPS ISA that reads three edges for a triangle and computes the perimeter if the input is valid. Otherwise, display that the input is invalid. The input is valid if the sum of every pair of two edges is greater than the remaining edge. [Direction: You can consult any resources such as books, online references, and videosfor this assignment, however, you have to properly cite and paraphrase your answerswhen it is necessary.] solve it any how urgently please.
Please answer the following with the reference; 1a. What is the purpose of the movq 0x10 (%rdi), rbp instruction here (at the C level or higher)? How does this relate to the earlier call to pushq rbp? 1b. Alice just remembered that the original C code had the following structure! Using what you now know about mystery, fill in the blanks with C code. long mystery ( TreeNode* t){ If ( ) { return ; } return }
Here is a small snippet of code that saves $t0 $t1 and $t2 in order to stack ie first saves t0 then t1 and finally t2 what instruction should be put in the place of x y z X sw $t0, 8($sp) Y Z
Rearrange the following code to minimize the total number of cycles, assuming that a dependent instruction following the load will need two clock cycles of delay before getting the data. Load r1, 64 (r2)Add r2, r2, r2Sub r3, r4, r1Load r4, 32 (r4)
Question 7: In the following instruction sequence, show the resulting value of AL where indicated, in Hexadecimal: a. mov al,7Ah not al ; . b. mov al,72h xor al,0DCh ; and also write instructions that first clear bit positions 0,1 and 2 in AL. Then, if the destination operand is equal to zero, the code should jump to label LABEL1. Otherwise, it should jump to label NEXT
I am still getting the same wrong output using the updated code that you provided. I moved the andi instruction after the srl instruction. This is the code that you provided with the fix: .data .globl main .textmain: # compute the next state of the LFSR for each input state li $a0, 0x00000001 jal lfsr_next_state move $t0, $v0 li $a0, 0xdeadbeef jal lfsr_next_state move $t1, $v0 li $a0, 0x200214c8 jal lfsr_next_state move $t2, $v0 li $a0, 0x00000000 jal lfsr_next_state move $t3, $v0 # print the output states li $v0, 1 move $a0, $t0 syscall li $v0, 1 move $a0, $t1 syscall li $v0, 1 move $a0, $t2 syscall li $v0, 1 move $a0, $t3 syscall # exit the program li $v0, 10 syscall # Function to compute the next state of an LFSR# Input parameter: $a0 = current state# Output:…
Th is exercise is intended to help you understand the relationship between forwarding, hazard detection, and ISA design. Problems in this exercise refer to the following sequence of instructions, and assume that it is executed on a 5-stage pipelined datapath:add r5,r2,r1lw r3,4(r5)lw r2,0(r2)or r3,r5,r3sw r3,0(r5)> If there is no forwarding or hazard detection, insert nops to ensure correct execution.> Repeat above step, but now use nops only when a hazard cannot be avoided by changing or rearranging these instructions. You can assume register R7 can be used to hold temporary values in your modifi ed code.> If the processor has forwarding, but we forgot to implement the hazard detection unit, what happens when this code executes?
What will be the contents of AX, BX, CX and DX registers after the execution of the following program? MOV DX, 1234 MOV CL, 0F MOV BH, AB MOV AX, 6589 ADD DX, AX MOV AH, 12 Lab1: OR AH, CL MOV DL, 41 MOV BX, F0 MOV CL, 3A LOOP Lab1 INC BX SHR BX,2
Q2. Refer to datapath design on slide no. 26 with added blocks for jump instructions as shown inslide 33 in Chapter 4 (part 1). Let’s assume a program has 500 instructions. These instructions aredistributed as follows:R-Type Immediatearithmetic(addi)Load Store Branch Jump25% 5% 20% 20% 10% 20%Answer the following questions (show calculations):a) How many instructions will use instruction memory?b) How many instructions will use data memory?c) How many instructions will use the sign extend block?d) In the clock cycles, where the sign extend block is not required, does it remain idle? If yes,how? If not, what happens to the output of the block in that cycle? chapter 4, slide 33 is added as an image needed to solve the question
6. Fill in the requested register values on the right side of the following instruction sequence:mov esi,OFFSET myBytesmov ax,[esi] ; a. AX =mov eax,DWORD PTR myWords ; b. EAX =mov esi,myPointermov ax,[esi+2] ; c. AX =mov ax,[esi+6] ; d. AX =mov ax,[esi-4] ; e. AX =
What are contents of R5 after execution to each of the following instruction? (Assume R2 contains OxABCD01235 and R3 contains 0x1111 1111) ADD R5, R2, R3 SUB R5, R2, R3 XOR R5, R2, R3 ADD R5, R2, R3 ROR R2, # 0x8 ADD R5, R2, # 0x0F