2. The results of a consolidated-drained triaxial test conducted on a normally consolidated clay are as follows: Chamber confining stress = 220 KPa Deviator stress at failure = 320 KPa (a) Angle of friction (b) Angle of failure (c) Normal and Shear stress on the failure plane Calculate:

2. The results of a consolidated-drained triaxial test conducted on a normally consolidated clay are as follows: Chamber confining stress = 220 KPa Deviator stress at failure = 320 KPa (a) Angle of friction (b) Angle of failure (c) Normal and Shear stress on the failure plane Calculate:

Fundamentals of Geotechnical Engineering (MindTap Course List)

5th Edition

ISBN:9781305635180

Author:Braja M. Das, Nagaratnam Sivakugan

Publisher:Braja M. Das, Nagaratnam Sivakugan

Chapter10: Shear Strength Of Soil

Section: Chapter Questions

Problem 10.20P

See similar textbooks

Related questions

Q: A consolidated drained tri-axial test was conducted on a normally consolidated clay. The results…

A: c=0 (since clay)

Q: Three samples of loose sand were tested under consolidated undrained (CU) conditions. The failure…

Q: 6- A consolidated-undrained triaxial test was conducted on a dense sand with a chamber-confining…

Q: A sample of a cohesioness soil is subjected to axial principal effective stress (σ1’) of 300 kPa and…

A: Given: Axial principal effective stress = 300 kPa Radial principal effective stress = 100 kPa…

Q: Following data are given for a direct shear test conducted on dry silty sand:Specimen dimensions:…

A: The given data is shown below:

Q: A drained triaxial test was conducted on a normally consolidated clay speci- men with a chamber…

Q: (b) Calculate the stress increase at the center of the clay layer and 1) beneath the foundation…

A: The Foundation helps in transfer of load to the ground from the structure. Given, P=80 kPa D=6 m…

Q: QUESTION # 1: Following data are given for a direct shear test conducted on dhy sand: • Specimen…

Q: A consolidated-drained triaxial test on a sand yields the results:All-around confining pressure = σ3…

A: Given; confining pressure = σ3 = 30 lb/in2 axial stress at failure ; Δσ = 96 lb/in2

Q: A compression test (CU) was conducted on a normally consolidated clay at a confining pressure of l10…

A: Given: Confining pressure = 110 kPa Deviator stress = 90 kPa Pore-water pressure = 55 kPa

Q: The equation of the effective stress failure envelope for a slightly over-consolidated clay is 7, =…

A: Pole Method The Pole method is used in mohr's circle to find the stresses along the plane. The Pole…

Q: A consolidated undrained triaxial test was conducted on a normally consolidated clay. Following are…

A: Given; Cell or chamber pressure=200+x kN/m2 Deviator stress at failure=300+x kN/m2

Q: A consolidated-undrained triaxial test was conducted on a dense sand with a confining pressure of…

A: The above test is consolidated undrained test Confining pressure = 138kN/m2 ϕ'= 24o and ϕ= 31o

Q: Table 1 given below presents the results of a conventional oedometer consolidation test conducted on…

A: The compressibility of the soil takes place in two different methods namely consolidation and…

Q: 2. The shear strength of a normally consolidated clay can be given by the equation t = ơ' tan 28°. A…

Q: A consolidated-undrained triaxial compression test was performed on a normal consolidated clay…

Q: 3. A consolidated undrained test on a normally consolidated clay yielded the following results 7.2…

A: U=7.2psi

Q: A consolidated-drained triaxial test on a normally consolidated clay yielded a friction angle, Φ',…

A: Given data- Consolidated-drained triaxial test Normally consolidated clay friction angle, Φ', of…

Q: A consolidated drained triaxial test was conducted on a normally consolidated clay. Following are…

Q: A consolidated-drained triaxial test was conducted on a normally consolidated clay. The results were…

A: Solution-

Q: Three consolidated-undrained tri-axial tests were performed on samples retrieved from a 4 meter…

A: For the test 1 - Value of σ'3σ'3 = σ3 - ∆udf⇒σ'3 = 80 - -12⇒σ'3 = 92 KNm2 Value of σ'1σ'1 = σ'3 +…

Q: The equation of the effective stress failure envelope for normally consolidated clay soil is 30…

Q: The results of two drained triaxial tests on a saturated clay are given next: Specimen I: Chamber…

Q: Consolidated undrained triaxial tests are performed on two identical specimens of saturated,…

A: from triaxial test we know thatσ1=σ3tan245+ϕ2+2Ctan45+ϕ2where σ1=vertical stress =σd+σ3and…

Q: a consolidated drained trial test was conducted on a normally consolidated clay with majo minor…

Q: A drained triaxial test on a normally consolidated clay showed that the failure plane makes an angle…

Q: Example 3 The equation of effective stress failure envelope for normally consolidated clayey soil is…

Q: A dry sand sample in a triaxial test failed when the confining stress (minor principal stress) was…

A: The given data is shown below:

Q: a. Compute the angle of friction of the clay sample b. Compute the shear stress at failure plane c.…

Q: Triaxial compression test (CU) is conducted on a normally consolidated clay at a confining pressure…

A: It is required to find the angle of internal friction of soil. Given data, Confining pressure = 100…

Q: A drained triaxial test on the normally consolidated clay showed that the failure plane makes an…

Q: A drained triaxial test was conducted on a normally consolidated clay specimen with a chamber…

A: Given data:

Q: Question 6 A consolidation test was conducted on a clay sample and found that the clay has a…

Q: Question Attached

A: In a consolidated drained triaxial test, drainage is allowed, mohr's failure envelope passes through…

Q: A sample of normally consolidated clay was subjected to a consolidated undrained triaxial…

A: Given,

Q: Oz = 276 kN/m? (Aoa)f = 276 kN/m?

Q: Problem 2. A certain soil sample with cohesion of A kPa, and angle of internal friction is B degrees…

Q: A consolidated-undrained triaxial test was conducted on a dense sand with a chamber- confining…

Q: A triaxial test conducted on a cohesionless soil gives the following results: Deviator stress at…

Q: A NC clay soil has the total stress friction angle (φ) = 10⁰. When the soil is conducting SCU…

A: Given: A normally consolidated clayey soil having friction angle (φ) = 10⁰ In CU test, confining…

Q: The size of a sand specimen in a direct shear test was 50 mm x 50 mm x 30 mm (height). It is known…

Q: Question 4 A consolidation test was conducted on a clay sample and found that the clay has a…

A: Given data: pre consolidation pressure = 120 kPa initial effective vertical stress = 100 kPa.

Q: 12.11 A consolidated-drained triaxial test was conducted on a normally consolidated clay. The…

A: Since you have asked multiple question, we will solve the first question for you. If you want any…

Q: In a drained triaxial test on consolidated clay the stress and angle are as follows : Deviator…

A: It is required to find the effective confining pressure at failure for the CD test.

Q: A consolidated undrained triaxial test was performed on a normally consolidated clay with a critical…

A: for normally consolidated soil The cohesion is zerocu=0so,σ3=σc=50kpaσ1=σc+σ1=50+σd

Q: 5. The shear strength of a normally consolidated clay can be given by the equation 7 = o'tan 31°. A…

A: Given :- Chamber confining pressure = 112 KN/m2 Deviator stress at failure = 100 KN/m2 Angle of…

Q: A consolidated-undrained triaxial test was conducted on a dense sand with a chamberconfining…

A: Given: The chamber confining pressure is 138 kN/m2. The angles are,

Q: 5- The shear strength of a normally consolidated clay can be given by the equation te= o'tan 27°.…

Q: Problems 12.1. Following data are given for a direct shear test conducted on dry silty sand:…

Q: A consolidated-undrained test on a normally consolidate clay yield the following results: Confining…

A: The given data is shown below: Confining pressureσ3=155 kPaDeviator stress=180 kPaPore pressure=79…

Concept explainers

Test for Determination of Shear Strength

The term shear strength is often associated with the soil. Shear strength is defined as the resistance to the deformation of soil particles due to the continuous action of shear stress. In short, shear strength is the maximum shear stress that a soil can sustain.

Question

2. The results of a consolidated-drained triaxial test conducted on a normally consolidated
clay are as follows:
Chamber confining stress = 220 KPa
Deviator stress at failure = 320 KPa
(a) Angle of friction
(b) Angle of failure
(c) Normal and Shear stress on the failure plane
Calculate:

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step 3

VIEW

Step by step

Solved in 3 steps with 3 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Test for determination of shear strength

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, civil-engineering and related others by exploring similar questions and additional content below.

Similar questions

A clay sample was consolidated in a triaxial cell under a backpressure of 50 kPa and cell pressure of 150 kPa. The drainage valve was then closed and the cell pressure was increased to 200 kPa when the pore pressure increased to 98 kPa. What is Skempton’s B-parameter? The above sample was then subjected to a vertical deviator stress, which was increased from zero under undrained conditions. The sample failed when the pore water pressure was 160 kPa and the deviator stress was 70 kPa. What is Skempton’s A-parameter at failure? Assuming the clay is normally consolidated, find the friction angle in terms of effective stresses.
A normally consolidated clay sample, which is fully saturated, was consolidated in thetriaxial cell under a particular all-round pressure of σ3. Upon consolidation, drainage valve isclosed and σ3 is kept constant while deviatoric stress was gradually increased under undrainedcondition until failure is reached. The following results are obtained: ½ (σ1 – σ3) = 1/3 σ3 and ½ (σ1′ + σ3′) = 2/3 σ3 Determine pore pressure coefficient Af′ at failure
There is an upward flow of 0.06 ml/s through a sand sample with a coefficient of permeability 3 × 10–2 mm/s. The thickness of the sample is 150 mm and the cross-sectional area is 4500 mm2. Determine the effective stressat the bottom and middle of the sample, if the saturated unit weight of the sample, is 18.9 kN/m3.
A consolidated drained triaxial is conducted on a normally consolidated soil with chamber confining pressure of 152kPa. If the deviator stress failure is 250kPa, determine the following: a. Calculate the angle of friction of the soil (degrees) b. Calculate the shear stress at the failure plane (kPa) c. Calculate the normal stress at the failure plane (kPa)
A consolidated tri-axial test was conducted on a normally consolidated clay. The results were as follows: Chamber confining pressure = 346 kPa, Deviator stress = 403 kPa. Compute for the shear stress on the failure plane in kPa. Round off to two decimal places.
In a drained triaxial test on consolidated clay the stress and angle are as follows: Deviator stress is 20 1b/in2 and friction angle is 210 . Calculate the effective confining pressure at failure.? A) 21 1b/in2 B) 22.2 1b/in2 C) 25.4 1b/in2 D) 17.9 1b/in2 make it fast
a consolidated tri-axial test was conducted on a normally consolidated clay. the results were as follows: chamber confining pressure = 316 kPa, deviator stress = 424 kPa. compute for the shear stress on the failure plane in kPa.
Please give me right solution according to the question. In a triaxial test on a saturated clay, the sample was consolidated under a cell pressure of 160 kPa. After consolidation the cell pressure was increased to 350 kPa, and the sample was then failed under undrained condition. If the shear strength parameters of the soil are c’ = 15.2 kPa, ϕ’ = 26°, B = 1, Af = 0.27, determine the pore pressure at the failure.
Example 9.2: A clay soil, tested in a consolidometer, showed a decrease in void res •m 1.20 to 1.10 when the presure was increased from 0.25 to 0.50 kgflem?. Calculate to. efficient of compressibility (a) and the coefficient of volume compressibility (m). If t •ficient of consolidation (c,) determined in the test for the given stress increment u m?/year, calculate the coefficient of permeability in cm/s. If the sample tested at the site was taken from a clay layer 3.0 m in thickness, determin consolidation settlement resulting from the given stress increment. lution:
Experimental data for clay specimen obtained initial values of e1 = 1.12 and P1 = 90 kPa, and final values of e2 = 0.90 and P2 = 460 kPa Determine the coefficient of volume compressibility
A Consolidated-Drained Triaxial Test was conducted on a normally consolidated clay. The results were as follows:· Chamber confining pressure = 400 kPa· Deviator Stress = 600 kPaa. Compute the angle of friction of the clay sample b. Compute the shear stress on the failure plane
17. The results of a consolidated drained test for a normally consolidated clay were as follows: chamber confining pressure = 300 Kpa and deviator stress = 400 KPa a. Compute the angle of friction of the clay sample b. Compute the shear stress at failure plane c. Compute the normal stress on the plane of maximum shear.