3. A 0.5g mixture contains SiO2 , NaCI & NH.CL. After Sublimation 0.4 g left was dissolved to Extract NaCl and Sediment SiO2 . The dry SiO2 was 0.25g. What is the percentage composition of the mixture?
Q: What is the mass in grams of potassium dichromate(K2Cr2O7) are required to prepare a 350 cm3…
A:
Q: Solutions of cyanide salts are still widely used in the extraction of gold metal from its ores. It…
A: Here, we need to determine the percentage purity of the potassium cyanide in the sample.
Q: 2- A solution of concentrated HCl has specific gravity of 1.185 and percentage is 36.5 % (w/w) HCI.…
A: Molarity of a solution is the no.of moles present per litre of the solution. The molarity of an acid…
Q: What is the mass in grams of potassium dichromate(K2Cr2O7) are required to prepare a 350 cm3…
A: Given :- volume of solution = 350 cm3 molarity of potassium dichromate (K2Cr2O7) solution = 5.16 M…
Q: A 15.0% by weight solution was prepared using 90.0g of KCl and the resulting density of the solution…
A: Given % by weight = 15 % Mass of solute = 90.0 g Density of solution = 1.101 g/ml
Q: The procedure for the synthesis of menthone indicates that you should use 10 cm³ of 6M sulphuric…
A: Given that : The volume of the sulfuric acid to be used = 10 cm3 The molarity of sulfuric acid to be…
Q: In the synthesis of 1-phenylazo-2-naphthol, 1.10 g was produced from the reaction of solution A…
A:
Q: 7. What mass of Ca(OH)2 is produced when 24.0 mL of 0.1122M of CaCl2 reacts with excess KOH? moles…
A:
Q: One solution states it contained a saturated 0.25302% dye by mass in ethanol solvent. By measuring…
A: % by mass refers to mass of solute present in 100 g of solution. Molarity is the moles of solute per…
Q: Calculate the percentage mass composition of the following substance a. Ethanol ( C2H6O ) b. Gypsum…
A:
Q: What mass of KNO3 [MW=101] is needed to prepare 250.0mL of 0.450 M KNO3 in water?
A:
Q: 1. Copper metal and aqueous iron (III) chloride were made to react to reduce iron to Fe** while…
A: Cu metal + Iron III chloride → Fe2+ + Cu2+…
Q: An unknown sample containing a mixture of NaCl and Na2CO3 was analyzed to determine the %…
A: Here we have to determine the percentage of Na2CO3 in the mixture by given volumetric analysis data…
Q: Calculate the equivalent weight of KMnO₄ in the following reaction: MnO₄⁻ + CN⁻ + H₂O ⟶ MnO₂ (s) +…
A: Since you have posted multiple questions, we are entitled to answer the first only.
Q: 3- Reaction between barium chloride and sulfuric acid: A volume V= 100 ml of solution S1 with…
A:
Q: You were tasked to prepare 477 ml of 3.00 M HNO3. If you were provided a stock solution of 70.5%…
A: Given that - Volume of HNO3 tasked = 477 mL Molarity of HNO3 tasked = 3.00 M Stock HNO3 Solution…
Q: When working with very low concentrations, such as 0.000245 M, it can be more convenient to…
A: Molarity: It is the number of moles of solute present per Litre of the solution. The units of…
Q: Masses : Ca = 40.08 g S= 32.07 g O= 16.00 g A 35.0 mL sample of CaSO4 was evaporated to…
A:
Q: 6. In the molecular weight determination by the Dumas method, as illustrated below, several grams of…
A: The mass of the bulb filled with vapor was 36.127 g;The mass of the empty (evacuated) bulb was…
Q: A sample of sodium carbonate; Na,CO3 (MW=105.9 g/mole) weighing O.3125 g was dissolved in 40.0ml…
A: Given, The molar mass of Na2CO3 = 105.9 g/mol Mass of Na2CO3 = 0.3125 g Volume of Na2CO3 solution =…
Q: If 16.45 mL of ammonium thiocyanate solution is required to react completely with 25.00 mL of 0.1546…
A: Answer: These questions are based on the stoichiometric calculation where we have to calculate the…
Q: A 0.2422 g sample of a certain fruit was analyzed for the content of a certain pesticide. After a…
A: “Since you have posted a question with multiple sub-parts, we will solve first three subparts for…
Q: Calculate the limiting and excess reagent of 3I2 + 6KOH → 5KI + KIO3 + 3H2O with solutions. 950g=I2,…
A: The chemical equation is given as:3 I2 + 6 KOH → 5 KI + KIO3 + 3 H2OMolar mass of I2 = 253.8…
Q: By pipet, 15.00ml of the stock solution of potassium permanganate (KMn04) that was prepared by…
A: Mass of KMnO4 = 13.0 gm, Molar mass of KMnO4 = 158.034 gm/mol Number of moles of KMnO4 =
Q: 50.00 cm3 of a 1.5784 mol.dm-3 solution of potassium hydroxide is transferred to an empty 700.00 cm3…
A: Given: The initial concentration, (C1)=1.5784 mol.dm-3 The initial volume, (V1)=50 cm3 The final…
Q: How many grams of Ni(OH)2 are produced from the reaction of 45.0 mL of a 1.60 M NaOH solution and…
A: Given, 45.0mL of 1.60M NaOH
Q: 5. An ethanol-water solution is prepared by dissolving 10.0mL of ethanol, C2H5OH (density= 0.789…
A: As per our guidelines, I can only answer first three sub-parts of the question. Concentration of…
Q: A 36.0 mL sample of aqueous sulfuric acid was titrated with O.250 M KOH(aq) until the acid-base…
A: The volume of sulfuric acid = 36.0 mL The molarity of KOH = 0.250 M The mass of residue formed after…
Q: 7. The CO in a 28.9-L sample of gas was converted to CO2 by passing the sample over iodine pentoxide…
A: Answer: This question is based on the stoichiometric calculation where we have to convert the moles…
Q: 2- A solution of concentrated HCl has specific gravity of 1.185 and percentage is 36.5 % (w/w) HCl.…
A: Formality is concentration term, it is the number of formula mass in grams present in one liter of…
Q: In gravimetric determination of sulfate present in the soil, 0.2075g of sample was treated with 0.2…
A: The reaction between Sulfate present in the salt and BaCl2 is as follows, SO42- + BaCl2 →BaSO4 +…
Q: 25.0mL of a 0.515 M K2S solution is mixed with 30.0 mL of 0.833 M HNO3 acid solution to give the…
A: In this question, we have to find out the correct answer of given problem by the help of the…
Q: A 20.0 g sample of KOH (A)(MW = 56.10 g A) will react with what volume (in mL) of 0.500 M KH2P04 (s)…
A: The balanced reaction taking place is given as, => Given: Mass of KOH taken = 20.0 g. Molarity of…
Q: ou separated acetanlide from sand and sodium chloride (NaCl) via recrystallization. You separated…
A: We know, Percentage yield = (actual yield/theoretical yield) * 100%
Q: of (a) molarity ? erum? (C) ppm by wt? 2. How many mL of a 0.250 M KA solution must be diluted to…
A:
Q: 0.004 C8H7NO3, 15mL ethanol, 0.002mol NaBH4 was used. HCl was used to acidify. It was then extracted…
A:
Q: another question The aluminum in a 1.200g sample of impure ammonium aluminum sulfate was…
A:
Q: STEP1 Put some FeS particles into a big tube. Add 1 or 2 mL of 18% HCl solution onto FeS particles.…
A: The reaction that takes place when FeS reacts with HCl is expressed as,…
Q: The standard solutions of iron(III) thiocyanate (solutions of known concentration) were prepared for…
A: Purpose: The equilibrium constant for the formation of iron(III) thiocyanate complexion is to be…
Q: Zinc and magnesium react with hydrochloric acid to produce the metal chlorides and hydrogen gas. A…
A: The reaction of Zn and Mg with HCl is – Zn + 2HCl →ZnCl2 + H2Mg + 2HCl →MgCl2 + H2
Q: A 0.755-g sample of hydrated copper(II) sulfate (CUSO4•NH2O) was heated until it lost all the water…
A: Given: Mass of CuSO4.nH2O taken = 0.755 g And mass of CuSO4 produced after heating = 0.483 g Molar…
Q: Consider a blend of mass 5g formed from 2.2 g of C12H24 and 2.8g of C998H1000 paraffin's:, What are…
A: Number average molar mass Mathematical expression Mn =∑Mii∑ini Weight Average molar mass…
Q: Mass of Na2CO3.H2O (g) = 2.12g (g) Mass of the CaCl2.2H2O (g) = 1.98g Mass of the top funnel +…
A: Given data, Mass of Na2CO3.H2O=2.12gMass of CaCl2.2H2O=1.98gMass of CaCO3…
Q: In the standardization of HCl using pure anhydrous sodium carbonate as the primary standard for…
A: At the equivalence point, Amount of HCl = Amount of sodium carbonate Amount = Volume ×…
Q: A stock solution of potassium permanganate (KMn04) was prepared by dissolving 13.0g KMn04 with DI…
A: Molarity: The number of moles of solute particles dissolved in 1 L of solution. M=n/v Given data…
Q: Volume of 0.100 M Na3PO4 solution used 30 mL 30 mL Initial burette volume of CaCl2 solution .6 mL…
A: We are given all the data to find the moles of CaCl2 consumed in the reaction and find the molarity…
Q: 6. In the molecular weight determination by the Dumas method, as illustrated below, several grams of…
A: The mass of the bulb filled with vapor was 36.127 g;The mass of the empty (evacuated) bulb was…
Q: solution was prepared by dissolving 413 mg of K3Fe(CN)6 (329.2 g/mol) in sufficient water to give…
A: The solution of the given question is
Step by step
Solved in 2 steps
- One litre of a saturated aqueous solution of Ag2SO4 (MW = 311.79 g mol- 1) at 25 °C is evaporated to dryness. 4.844 g of Ag2SO4 residue was produced. What is the solubility product (Ksp)?The concentration of CO in the air can be determined by passing a known volume of air through a tube containing I2O5, resulting in the formation of CO2 and I2. I2 is removed from the tube by distillation and collected in a solution containing excess KI, producing I3-. I3- is titrated with a standard solution of Na2S2O3. A 4.79 L air sample was sampled as described here, requiring 7.17 ml of 0.00329 M Na2S2O3 to reach the endpoint in a typical analysis. If the density of the air is 1.23×10^-3 g/ml, what is the amount of CO in the air in ppm? (CO: 28 g/ml)The arsenic in a 1.010 g sample of a pesticide was converted to H3AsO4 by suitable treatment. The acid was then neutralized, and exactly 40.00 mL of 0.06222M AgNO3 was added to precipitate the arsenic quantitatively as Ag3AsO4. The excess Ag in the filtrate and in the washings from theprecipitate was titrated with 10.76 mL of 0.1000MKSCN; the reaction wasAg+ + SCN-→ AgSCN(s) Calculate the percent AsO3 in the sample.
- The arsenic in a 1.203-g sample of a pesticide was converted to H3AsO4 by suitable treatment. The acid was then neutralized, and 40.00 mL of 0.05871 M AgNO3 was added to precipitate the arsenic quantitatively as Ag3AsO4. The excess Ag+ in the filtrate and in the washings from the precipitate was titrated with 9.63 mL of 0.1000 M KSCN, and the reaction was. Find the percentage of As2O3 in the sample.A 100 g soil containing 20% smectitie mineral matter was mixed with 150 mL solution containing 0.10 M Pb. CEC of pure smectitie is 110 emol(+)/kg. CEC of the soil (cmol(+)/kg) is:What wt of magnetite should be taken for analysis in order that after converting to a precipitate of Fe2O3.xH2O, the percentage of Fe3O4 in the sample can be found by multiplying the wt in grams of the ignited precipitate (Fe2O3) by 100.
- A student was tasked to perform gravimetric analysis of a soluble sulfate. His unknown sample weighed 0.7543 g. The sample underwentprecipitation using BaCl2 and was digested for overnight. The precipitate was then filtered off to obtain white crystalline precipitate that was collected inan ash less filter paper. In performing constant weighing, he obtained a crucible mass that is 29.9442 g. After burning his samples inside the crucible,the obtained mass was 30.3375 g. Compute for the theoretical % SO3 obtained by the student and the theoretical mass (g) of SO3 that should be obtained by the student using his weighed sampleA student was tasked to perform gravimetric analysis of a soluble sulfate. His unknown sample weighed 0.7543 g. The sample underwentprecipitation using BaCl2 and was digested for overnight. The precipitate was then filtered off to obtain white crystalline precipitate that was collected inan ash less filter paper. In performing constant weighing, he obtained a crucible mass that is 29.9442 g. After burning his samples inside the crucible,the obtained mass was 30.3375 g.29. Compute for the mass (g) of BaSO4 from the experiment.A) 0.3933B) 0.3393C) 0.3133D) 0.3951E) 0.359130. Compute for the experimental mass (g) of SO3 in grams obtained by the student.A) 0.1439B) 0.1349C) 0.1943D) 0.1394E) 0.359131. Compute for the experimental % SO3 obtained by the student.A) 73.21B) 56.33C) 17.89D) 56.89E) 72.8032. Compute for the theoretical % SO3 obtained by the studentA) 0.3933B) 56.37C) 17.33D) 17.89E) 0.425233. Compute for the theoretical mass (g) of SO3 that should be obtained by the student…Electrolytic manganese dioxide can be prepared from manganese carbonate ore by crushing,milling and leaching the ore in sulphuric acid. Manganese sulphate is crystallised from thesolution, redissolved and electrolysed to give the manganese dioxide.If the crystallisation were performed in a 30m3 tank and the concentration of the solutionentering the tank were 160 grams per litre and left the tank at 40 grams per litre, how muchMnSO4.5H2O would be produced.
- A public water supply was found to contain 0.8 partper billion (ppb) by mass of chloroform, .(a) How many molecules would be present in a350 mL glass of this water? (b) If the in part (a)could be isolated, would this quantity be detectable onan ordinary analytical balance that measures masswith a precision of g?The arsenic in a 1.223-g sample of a pesticide was converted to H3AsO4 by suitable treatment. The acid was then neutralized, as 40.00 mL 0.07891 M AgNO3 was added to precipitate the arsenic quantitatively as Ag3AsO4. The excess Ag+ in the filtrate and washings from the precipitate was titrated with 11.27 mL of 0.1000 M KSCN; the reaction was Ag+ + SCN- → AgSCN(s) Calculate the percent As2O3 in the sample.A salt solution (30% Na2CO3) weighing 1ton iscooled to 20C where the salt crystallizes asdecahydrate. What will be the crystal yield ifthe solubility is 21.5 kg anhydrous Na2CO3/100kg water? (assume that 3% of the totalsolution is lost by evaporation)
