A 4 pole ,d.c. shunt generator with a shunt field resistance of 50 ohm ,and armature resistance of 1 ohm ,has 400 lap connected conductors in its armature .the flux per pole is 20 mWb, calculate the power absorbed by a load of 10 ohm connected across the armature terminals ,when the generator is driven at 900 r.p.m.

A 4 pole ,d.c. shunt generator with a shunt field resistance of 50 ohm ,and armature resistance of 1 ohm ,has 400 lap connected conductors in its armature .the flux per pole is 20 mWb, calculate the power absorbed by a load of 10 ohm connected across the armature terminals ,when the generator is driven at 900 r.p.m.

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter11: Transient Stability

Section: Chapter Questions

Problem 11.3P

See similar textbooks

Similar questions

A 4 pole dc shunt generator with a shunt field resistance of 100 ohm and an armature resistance of 1 ohm has 378 wave connected conductor in its armature. the flux per pole is 0.02wb, if the load resistance of 10 ohm is connexted across the aemature terminal and the generator driven at 1000rpm, calculate the power obsorbed by load
A 20 kW, 440-V, short-shunt, compound d.c. generator has a full-load efficiency of 87%. If the esistance of the armature and interpoles is 0.4 ohms and that of the series and shunt fields 0.25 ohms and 240 ohms respectively, calculate the combined bearing friction, windage and core-loss of the machine.
7) The flux per pole of a four-pole generator is 0.05 wb. It driven at a speed of 1500 rpm. In order to have an induced emf of 20 v per conductor, , if the winding is lap-connected, find (a) the number of conductors in series in each parallel path, (b) the number of conductors between brushes to generate 240 v, and (c) the total number of conductors in the armature.
A shunt generator has an output of 22 kW at a terminal voltage of 220 V. armature and shunt field resistances are 0.05 ohm and 44 ohms, respectively. If the copper loss is equal to the core, friction and windage losses at this load, the over-all efficiency of this generator is nearest to
. When a self-excited compound DC generator supplies load, the terminal voltage is not the same as the generated emE Why? a) voltage drop across the armature resistance will reduce the voltage available at the load terminals b) where there is a series field, voltage drop across the series field resistance will reduce the voltage available at the load terminals c) both "a" and "b" d) neither "a" nor "b"
5. A 4-pole, d.c. shunt generator with a shunt field resistance of 100 Ω and an armature resistance of 1 Ω has 378 wave-connected conductors in its armature. The flux per pole is 0.02 Wb. If a load resistance of 10 Ω is connected across the armature terminals and the generator is driven at 1000 r.p.m., calculate the power absorbed by the load.
A 20 kW, 440-V, short-shunt, compound d.c. generator has a full-loade fficiency of 87%. If the resistance of the armature and interpoles is 0.4Ω and that of the series and shunt fields 0.25 Ω and 240 Ω respectively, calculate the combined bearing friction, windage and core-loss of the machine. [Ans. 725 W]
A shunt generator supplies a 31kW load at 230V through cables of resistance, R = 122mΩ. If the field winding resistance, Rf =50Ω and the armature resistance, Ra =51mΩ. Determine the following below: The terminal voltage is, Answer and unit for part 1 The e.m.f. generated in the armature is,
A long-shunt, four pole, 1500-W, 250-V, duplex wave-wound DC compound generator with the rated speed of 500 r.p.m., has a shunt field resistance of 100 Ω, a series field resistance of 0.05 Ω and an armature resistance of 0.2 Ω. If the flux per pole is 48.798 mWb and a total of 620 conductors, calculate the following: (a) the generated voltage, (b) the field currents, (c) the power generated in the armature.
The output of a shunt generator is 66 A at 100 volts. Armature and field resistances are, respectively, 0.04 ohm and 25 ohms. If the efficiency at this load is 88%, determine the core and friction losses
PUT THE EQUATION Given a progressive 2-layer simplex lap winding for a 4-pole dc generator having 20 slots and 20 commutator segments, determine the following and input it on the text field provided. determine: a.Coil Pitch, Ys b.Commutator Pitch, Yc, Back Pitch, YB d. Front Pitch, YB, No. of Parallel Paths
A three-phase Y-connected synchronous generator has rated values of 90 MVA, 15 kV, 0.6 reverse power factor, 50-Hz. Synchronous reactance 1.6 ohmsand armature resistance is neglected. According to thisa) Find the induced voltage (EA) and armature current (LA). b) Find the voltage regulation.c) If this generator was operated at 60 Hz with the same armature and field losses as at 50 Hz; What would be the voltage, apparent power and reactance of the generator