A hungry bear weighing 700 N walks out on a beam in an attempt to retrieve a basket of goodies hanging at the end of the beam (see figure below). The beam is uniform, weighs 200 N, and is 6.00 mlong, and it is supported by a wire at an angle of 0 = 60.0°. The basket weighs 80.0 N.Goodies(a) Draw a free-body diagram for the beam. (Submit a file with a maximum size of 1 MB.)Choose Fileno file selectedThis answer has not been graded yet.(b) When the bear is at x = 1.00 m, find the tension (in N) in the wire supporting the beam and the components of the force exerted by the wall on the left end of the beam.T =373.7Your response is within 10% of the correct value. This may be due to roundoff error, or you could have a mistake in your calculation. Carry out all intermediate results to at least four-digitaccuracy to minimize roundoff error. NFxNFy(c) If the wire can withstand a maximum tension of 875 N, what is the maximum distance (in m) the bear can walk before the wire breaks?

Answered: Image /qna-images/answer/57373044-ccfe-40bf-b440-193746f05d56.jpg

A hungry bear weighing 700N walks out on a beam in an attempt to retrieve a basket of goodies hanging at the end of the beam (see figure below). The beam is uniform, weighs 200 N, and is 6.0 long, and it is supported by a wire at an angle of e = 60.0°. The basket weighs 80.0 N.

A hungry bear weighing 700N walks out on a beam in an attempt to retrieve a basket of goodies hanging at the end of the beam (see figure below). The beam is uniform, weighs 200 N, and is 6.0 long, and it is supported by a wire at an angle of e = 60.0°. The basket weighs 80.0 N.

Glencoe Physics: Principles and Problems, Student Edition

1st Edition

ISBN:9780078807213

Author:Paul W. Zitzewitz

Publisher:Paul W. Zitzewitz

Chapter8: Rotational Motion

Section: Chapter Questions

Problem 1STP

See similar textbooks

Related questions

Q: A uniform board is suspended from a ceiling and supported horizontally by two wires, A and B. The…

A: Draw the free body diagram

Q: 3. A 15-kg uniform beam is 3.0 m long and is pivoted 1.0 m from the left end. A 35 kg child sits on…

A: Given mass of the uniform is M = 15 kg (center of mass at X = 0.5 m right to pivot) mass of the…

Q: A diving board 3.00 m long is supported at a point 1.00 m from the end, and a diver weighing 500 N…

Q: A uniform board supports two children weighing 500 N and 350 N. If the support is at the center of…

Q: A uniform board of length L and weight W is suspended between two vertical walls by ropes of length…

Q: What are the forces applied to the board by the posts?

A: the values provided in the question are as follows- mass of board = 34 kg length of board = 4.7m…

Q: 2. A 3.00 m long, uniform diving board has a mass of 26.0 kg and is securely fastened at point A and…

Q: A uniform rod of length 100cm and mass 0.4 kg is placed on a fulcrum at a distance of 80cm from the…

A: Draw the free-body diagram of the rod.

Q: A gymnast with mass 46.0 kg stands on the end of a uniform balance beam as shown in the figure. The…

A: Concept Apply the torque concept Torque=Distace*Force

Q: A store's sign has a mass of 20 kg and is 3.0 m long. It is uniform, so its center of gravity is at…

Q: The 3 m long uniform plank is supported by a fulcrum at the midpoint. Where should a 45 kg student…

Q: 18 D. From the step ladder shown in the figure, sides AC and CE are each 2.44 m long and hinged at…

Q: The 3 m long uniform plank is supported by a fulcrum at the midpoint. Where should a 45 kg student…

A: Given: The mass of the student is 45 kg. The length of the plank is 3 m. The free-body diagram is…

Q: How much work was done by the person against Gravity?

A: Initially the center of mass is at a height, The center of mass ends at a height of

Q: A person is standing on a section of uniform scaffolding as shown in the figure. The section of…

Q: A large wood beam weighing 800 N is supported by two posts as shown. If an unthinking man weighing…

A: Given, large wood beam weighs 800 N supported by two rods Man weighing 700 N walks from A to right…

Q: A uniform bridge span weighs 50 103 N and is 40.0 m long. An automobile weighing 15 103N is parked…

Q: A father and his daughter are playing a see-saw made of a plank of length 5.1 m and of weight 118 N…

Q: A uniform beam of mass m = 140.0 kg and length L = 2.40 m is supported by two columns at each end.…

A: Given data The mass of the uniform beam is m = 140 kg The length of the beam is L = 2.40 m The mass…

Q: As shown in the figure below, a uniform beam is supported by a cable at one end and the force of…

A: Given Data: The length of a beam is, L=4.75 m The coefficient of static friction between the wall…

Q: Cable 1 40 N Cable 2 1 m A uniform 50 N beam that is 10 m long is suspended horizontally by two…

Q: A 10.0-kg monkey climbs a uniform ladder with weight w = 1.09 ✕ 102 N and length L = 3.40 m as…

A: T = 80 N Weight of the monkey = Mg = 10 × 9.8 => W = 98 N Weight of ladder w = mg = 1.09 × 10²…

Q: A 49.4 kg man walks to the end of a 34.0 kg, 12.6 m long diving board, that is being supported at…

Q: a uniform beam with a weight of 60 N and a length of 3.2 m is hinged at its lower end, and a…

Q: The following uniform beams are pivoted about their center of mass. Which of them is in static…

Q: A diving board 3.00 m long is supported at a point 1.00 m fromthe end, and a diver weighing 500 N…

Q: A hungry bear weighing 700 N walks out on a beam in an attempt to retrieve a basket of goodies…

Q: A uniform beam of weight 12 N and length 10 m is mounted by a small hinge on a wall. The beam is…

Q: A diver of weight 510 N stands at the end of a diving board of length L = 4.9 m and negligible mass…

Q: A horizontal plank 4.32m long and having mass 25.2 kg rests on two pivots, one at the left end and a…

Q: The system in the figure is in equilibrium. A concrete block of mass 314 kg hangs from the end of…

A: GIVEN : mass of block, m = 314 kg mass of uniform strut, M = 50.6 kg strut angle, θ = 59.0° φ =…

Q: On the third day, Ate Neo's mission is to conduct a routine patrol in a park. She notices a "taho"…

A: In order to balance both the buckets on the yoke, it is important that the vendor carry the yoke on…

Q: A person is standing on a section of uniform scaffolding as shown in the figure. The section of…

A: The force diagram can be drawn as below,

Q: As shown in the figure, a 10 m long bar is attached by a frictionless hinge to a wall and held…

A: Given: The length of the rod is 10 m. The weight of the rod is 66.5 N. The tension in the rope is…

Q: As shown in the figure below, a uniform beam is supported by a cable at one end and the force of…

A: Let the tention in the string be T. T will have two components, one upward (Tsinθ) and another…

Q: A 700 N bear is standing on a metal plank supported by the cable shown in the figure. At the end of…

Q: what is the tension in the wire?

A: Given:

Q: A uniform 1200 N beam that is 3.50 m long is suspended horizontally by two vertical wires at its…

Q: Two children are trying to balance on a seesaw, which includes a fulcrum and a board that is 10m…

Q: 45 kg.** X = ? +0.4 m -0.5 m 30 kg 40 kg The 3m long uniform plank is supported by a fulcrum at the…

Q: A uniform ladder is 15 m long and weighs 210 N. In the figure, the ladder leans against a vertical,…

Q: A 45.1 kg man is walking on a 147 kg uniform beam that is attached 19.0 m below the top of a…

A: Draw the free-body diagram of the system.

Concept explainers

Rotational Equilibrium And Rotational Dynamics

In physics, the state of balance between the forces and the dynamics of motion is called the equilibrium state. The balance between various forces acting on a system in a rotational motion is called rotational equilibrium or rotational dynamics.

Equilibrium of Forces

The tension created on one body during push or pull is known as force.

Question

A hungry bear weighing 700 N walks out on a beam in an attempt to retrieve a basket of goodies hanging at the end of the beam (see figure below). The beam is uniform, weighs 200 N, and is 6.00 m
long, and it is supported by a wire at an angle of 0 = 60.0°. The basket weighs 80.0 N.
Goodies
(a) Draw a free-body diagram for the beam. (Submit a file with a maximum size of 1 MB.)
Choose File
no file selected
This answer has not been graded yet.
(b) When the bear is at x = 1.00 m, find the tension (in N) in the wire supporting the beam and the components of the force exerted by the wall on the left end of the beam.
T =
373.7
Your response is within 10% of the correct value. This may be due to roundoff error, or you could have a mistake in your calculation. Carry out all intermediate results to at least four-digit
accuracy to minimize roundoff error. N
Fx
N
Fy
(c) If the wire can withstand a maximum tension of 875 N, what is the maximum distance (in m) the bear can walk before the wire breaks?

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

Step 2

Step 3

Step 4

Trending now

This is a popular solution!

Step by step

Solved in 4 steps with 4 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, physics and related others by exploring similar questions and additional content below.

Similar questions

A wooden door 2.1 m high and 0.90 m wide is hung by two hinges 1.8 m apart. The lower hinge is 15 cm above the bottom of the door. The center of mass of the door is at its geometric center, and the weight of the door is 260 N, which is supported equally by both hinges. Find the horizontal force exerted by each hinge on the door.
A crane of mass m1 = 3 000 kg supports a load of mass m2 = 10 000 kg as shown in Figure P10.36. The crane is pivoted with a frictionless pin at A and rests against a smooth support at B. Find the reaction forces at (a) point A and (b) point B. Figure P10.36
A horizontal plank 4.00 m long and having mass 20.0 kg rests on two pivots, one at the left end and a second 1.00 m from the right end. Find the magnitude of the force exerted on the plank by the second pivot. (See Section 8.4.)
How do you do this? A hungry bear weighing 700 N walks out on a beam in an attempt to retrieve a basket of goodies hanging at the end of the beam (see figure below). The beam is uniform, weighs 200 N, and is 6.00 m long, and it is supported by a wire at an angle of ? = 60.0°. The basket weighs 80.0 N. a) When the bear is at x = 1.00 m, find the tension (in N) in the wire supporting the beam and the components of the force exerted by the wall on the left end of the beam. b) If the wire can withstand a maximum tension of 875 N, what is the maximum distance (in m) the bear can walk before the wire breaks?
A uniform plank of length 2.00 m and mass 26.0 kg is supported by three ropes, as indicated by the blue vectors in the figure below. Find the tension in each rope when a 710–N person is d = 0.500 m from the left end. Answer the 3 boxes below:
Two people, let’s call them person A and person B, carry a uniform board of length 6 meters and weight 150 N. Person A is 1 m from one end and person B is 2 m from the other end. What weight does person A support? What weight does person B support?
A 4 m long horizontal uniform beam of mass 24 kg is supported by a wire as shown in the figure. The wire makes an angle of 26 degrees with the beam. Attached to the beam 1.6 m from the wall is a ball with a mass of 57 kg. VWhat is the tension in the string?
A wooden plank with a mass of 50.968 kg is supprted by two cable at its ends. At what location should a box of mass 20.387 kg be placed for one cable to exert a force of 125 N more than the other cable? Note: the location is the distance from each cable please show full solution, figure and fbd.
An 700N window cleaner stands on a 3.0 m uniform scaffold that weighs around 400 N. It is supported by ( vertical)ropes at each end. How far would the cleaner stand the supporting rope to produce a tension of 540 N in that rope?
Suppose the weight of the drawbridge in the figure is supported entirely by its hinges and the opposite shore, so that its cables are slack. The mass of the bridge is 2500 kg. What percent of the weight is supported by the opposite shore if the point of support is at the very end of the drawbridge? What is the magnitude, in newtons, of the force the hinges exert on the bridge under these circumstances?
As shown below, a sign weighing 434 N is hanging (via a wire) from a uniform 480 N beam of length L. Additionally, the beam is attached to a cable that makes an angle ? (? = 30°) with the beam. WebAssign Plot Determine the tension in the cable and the magnitude & direction of the force the hinge (the orange circle) exerts on the beam.Cable tension = 653.6 N Incorrect: Your answer is incorrect. Hinge force = 815.597 N Direction of hinge force = 46.05 relative to the vertical in quadrant 1 (incorrect)
Two painters are carrying a uniform horizontal ladder that is 12 feet long and weighs 200 N. If one person applies an upward force equal to 85 N at one end, at what point does the other person lift?