A large scale facility is designed to generate electricity. A well insulated turbine is used to power both a well insulated air compressor and a generator. Air enters the compressor (state 1) at 98 kPa and 295 K at a rate of 10 kg/s and exits (state 2) at 1 MPa and 620 K. Steam enters the turbine (state 3) at 12.5 MPa and 530°C and exits (state 4) at 10 kPa with a quality of 0.92. Determine the net power delivered to the generator by the designed system in hp.

A large scale facility is designed to generate electricity. A well insulated turbine is used to power both a well insulated air compressor and a generator. Air enters the compressor (state 1) at 98 kPa and 295 K at a rate of 10 kg/s and exits (state 2) at 1 MPa and 620 K. Steam enters the turbine (state 3) at 12.5 MPa and 530°C and exits (state 4) at 10 kPa with a quality of 0.92. Determine the net power delivered to the generator by the designed system in hp.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A proposed heat pump design creates a heating effect of 25 kW while using 5 kW of electrical power. The thermal energy reservoirs are at 300 K and 260 K. Is this possible according to the increase of entropy principle?
Air enters the compressor of a gas turbine plant at ambient conditions of 100 kPa and 25 ⁰Cwith a low velocity and exits at 1 MPa and 347 ⁰C with a velocity of 90 m/s. The compressionprocess is adiabatic, and the power input is 251. Determine the mass flowrateof the air through the compressor please be clear with the writing and explaining
Steam in an adiabatic turbine expands at a pressure of 6 MPa and a temperature of 450 ° C to a pressure of 0.1 MPa with a flow rate of 6 kg / s. If steam leaves the turbine as saturated steam, what will the power output of the turbine be?
Consider a steady-state steam turbine. Steam enters the turbine at a pressure of 12.5??? and a temperature of 700℃, and leaves the turbine at a pressure of 0.5???. If the isentropic efficiency of this turbine is 86%, determine its second law efficiency.
Steam enters a two-stage adiabatic turbine at 8 MPa and 500°C. It expands in the first stage to a state of 2 MPa and 350°C. Steam is then reheated at constant pressure to a temperature of 500°C before it is routed to the second stage, where it exits at 30 kPa and a quality of 97 percent. The work output of the turbine is 5 MW. Assuming the surroundings to be at 25°C, determine the reversible power output and the rate of exergy destruction within this turbine.
Steam enters an adiabatic nozzle at 3.5 MPa and 300°C with a low velocity and leaves at 1.6 MPa and 250°C at a rate of 0.4 kg/s. If the ambient state is 100 kPa and 18°C, determine the second-law efficiency.
Steam in an adiabatic turbine expands from 4 MPa and 450°C to 0.1 MPa with a flow rate of 6 kg / s. If steam leaves the turbine as saturated steam, what will be the power output of the turbine?
Air enters the evaporator section of a window air conditioner at 100 kPa and 27C with a volume flow rate of 6 m3/min. The refrigerant-134a at 120 kPa with a quality of 0.3 enters the evaporator at a rate of 2 kg/min and leaves as saturated vapor at the same pressure. Determine the exit temperature of the air and the rate of entropy generation for this process, assuming (a) the outer surfaces of the air conditioner are insulated and (b) heat is transferred to the evaporator of the air conditioner from the surrounding medium at 32C at a rate of 30 kJ/min.
Refrigerant 134-a enters the coil of the condenser of a residential heat pump at 500kPa and 400C and leaves at the same pressure as a saturated liquid at a rate of 0.05kg/s. Determine the power of a compressor required to run the heat pump if heat absorption from the outside air is 200kJ/kg. Please give clear solution and step by step
Air is compressed steadily by a reversible compressor from an inlet state of 100 kPa and 300 K to an exit pressure of 900 kPa. Determine the compressor work per unit mass for ideal two-stage compression with intercooling with a polytropic exponent of 1.3.
Water enters a pump at 100 kPa and 30°C at a rate of 1.35 kg/s and leaves at 4 MPa. If the pump has an isentropic efficiency of 70 percent, determine the second-law efficiency for an environment temperature of 20°C.
At a rate of 0.05 kg/s, refrigerant-134a enters the compressor of a refrigerator as superheated vapour at 0.14 MPa and -10 oC, and exits at 0.8 MPa and 50 oC. The refrigerant is cooled to 26°C and 0.72 MPa in the condenser before being throttled to 0.15 MPa. Determine: Taking into account any heat transfer and pressure drops in the connecting lines between the components, a. The isentropic efficiency of the compressor b.The coefficient of performance of the refrigerator