A machine makes two components; call them types A and B. It takes 250 seconds to switch production between the component types. During that time, no production occurs. When in production, each unit of A or B requires 0.5 second to be completed. The two components, A and B, are combined in an assembly process to make a final product; call it C. The assembly step can combine the two components into 1 unit every 2 seconds, or 30 units per minute. Assume there is ample demand. Suppose the machine rotates between one batch of 1,000 units of A and 1,000 units of B. What is the average inventory of B components? answer:______units

A machine makes two components; call them types A and B. It takes 250 seconds to switch production between the component types. During that time, no production occurs. When in production, each unit of A or B requires 0.5 second to be completed. The two components, A and B, are combined in an assembly process to make a final product; call it C. The assembly step can combine the two components into 1 unit every 2 seconds, or 30 units per minute. Assume there is ample demand. Suppose the machine rotates between one batch of 1,000 units of A and 1,000 units of B. What is the average inventory of B components? answer:______units

Precision Machining Technology (MindTap Course List)

2nd Edition

ISBN:9781285444543

Author:Peter J. Hoffman, Eric S. Hopewell, Brian Janes

Publisher:Peter J. Hoffman, Eric S. Hopewell, Brian Janes

Chapter8: Computer Numerical Control

Section8.4: Cnc Turning: Setup And Operation

Problem 4RQ: What is the process called where a program is sent to a machine one block at a time as the machine...

See similar textbooks

Similar questions

A worker is currently responsible for tending two machines in a machine cluster. The service time per machine is 0.35 min and the time to walk between machines is 0.15 min.The machine automatic cycle time is 1.90 min. If the worker’s hourly rate = $12/hr andthe hourly rate for each machine = $18/hr, determine (a) the current hourly rate for thecluster, and (b) the current cost per unit of product, given that two units are produced byeach machine during each machine cycle. (c) What is the percent idle time of the worker?(d) What is the optimum number of machines that should be used in the machine cluster, ifminimum cost per unit of product is the decision criterion?
In a casting machining company, it takes an operator 30 seconds to load ,15 seconds to unload each machining center. There are several same centers, all working on the same type of part, and the duration of the automatic operation is 1 minute. The travel time between machines is 15 seconds. Given that the cost per hour of the operator $8 and the cost per hour of the machine is $10, using the man-machine diagram, determine the value of the highest production rate for the system
In a casting machining company, it takes an operator 15 seconds to load and 15 seconds to unload each machining center. There are several same centers, all working on the same type of part, and the duration of the automatic operation is 1 minute. Given that the cost per hour of the operator and the cost per hour of the machine is $10, using the man-machine diagram, determine the value of the highest production rate for the system.
1. A certain batch of parts is routed through six machines in a batch production plant. The setup and operation times for each machine are given in the table below. Batch size is 200 and the average nonoperation time per machine is15 hr. Determine (a) manufacturing lead time and (b) hourly production rate for operation 4.Machine 1 2 3 4 5 6Setup time (hr) 5 3 6 4 5 3Operation time (min) 3.0 3.3 8.2 3.9 4.5 2.3 a. 6(4.3+200(3.9/60)+15) = 193.8 hours 24.2 days if 8 hour shiftb. 4(60)+200(3.9)/200 =5.1 hourly production for operation 4 2. Suppose the part in the previous problem is made in very large quantities on a production line in which an automated work handling system is used to transfer parts between machines. Transfer time between stations is 30 sec. total time required to setup the entire line is 102 hr. Assume that the operation times at the individual machines remain the same as in the previous problem, Determine (a) manufacturing lead time for a part coming off the line,…
I need help with part a b and c in question 2. Question one is listed because it is referenced in question 2. Any help with question 2 would be appreciated even if it is not all 3 parts. thank you 1. A certain batch of parts is routed through six machines in a batch production plant. The setup and operation times for each machine are given in the table below. Batch size is 200 and the average nonoperation time per machine is15 hr. Determine (a) manufacturing lead time and (b) hourly production rate for operation 4.Machine 1 2 3 4 5 6Setup time (hr) 5 3 6 4 5 3Operation time (min) 3.0 3.3 8.2 3.9 4.5 2.3 a. 6(4.3+200(3.9/60)+15) = 193.8 hours 24.2 days if 8 hour shiftb. 4(60)+200(3.9)/200 =5.1 hourly production for operation 4 2. Suppose the part in the previous problem is made in very large quantities on a production line in which an automated work handling system is used to transfer parts between machines. Transfer time between stations is 30 sec. total time required to…
A company makes two kinds of door Knobs, standard and deluxe ,the making process cost the company 15$ for the standard and 20$ for the deluxe by making on a grinder and a smoother machines, which they can be run for at most 80 hours a week, each standard one needs 2 hours on the grinder, and 4 hours on the smoother, and each deluxe one needs 4 hours on the grinder and 3 hours on the smoother ,the company sales at 25$,35$ for the standard and the deluxe respectively. To have the profit it wants the company decide to make at least 15 knobs from them at a week, formulate the linear programming model?
Four machines used to produce a family of parts are to be arranged into a GT cell.The from-to data for the parts processed by the machines are shown in the table below.(a) Determine the most logical sequence of machines for this data. (b) Construct the network diagram for the data, showing where and how many parts enter and exit the system.(c) Compute the percentages of in-sequence moves, bypassing moves, and backtrackingmoves in the solution. (d) Develop a feasible layout plan for the cell
An order for 100 of a product is processed on work centers A and B. The setup time on A is 30 minutes, and run time is 10 minutes per piece. The setup time on B is 50 minutes, and the run time is 5 minutes per piece. Wait time between the two operations is 4 hours. The move time between A and B is 10 minutes. Wait time after operation B is 4 hours, and the move time into stores is 15 minutes. There is no queue at either workstation. If it is decided to overlap operations A and B by splitting the lot of 100 into two lots of 70 and 30. Wait time between A and B and between B and stores is eliminated. Setup on operation B can start before the first batch arrives. Calculate the manufacturing lead time for the whole order. Calculate the manufacturing lead time for the first patch.
Solve fast Urgent.
The BOM for product A is shown in Figure 11.40, and datafrom the inventory records are shown in Table 11.9. In theMPS for product A, the MPS start row has 100 units in week 3and 200 in week 6. Develop the material requirements planfor the next 6 weeks for items C, D, and E.a. Develop the material requirements plan for the next6 weeks for items C, D, and E.b. What specific managerial actions are required inweek 1?
step-by-step
send fast