dynamic of machinery question photo A Scotch Yoke mechanism of a packaging machine is shown in Figure. Mechanism is workingSoru 26on vertical plane. Link 2 and 4 are massless. Link 3 has a mass of 1,4 kg. Assume that noYanlışfriction between the mating surfaces and the dimensions of the link 3 are negligible small.Second link length is 0,4 meter and makes an angle of ( e) 41 degrees with the horizontal line.14.00 üzerinden 0.00AD=DCnotunu verP Soruyu işaretleG=981 m/3Find the torquein Nm must be applied to link 2 to drive the linkage against a F=182 N forceas shown on link 4 leftward direction ( along negative x axis).(If the direction of the torque is CCW, just enter the value of it without any sign. If it has CWdirection, do not forget to enter - sign "negative sign" before the value.)

Scotch yoke mechanism is used to convert sliding motion into rotary motion slider is coupled with…

A Scotch Yoke mechanism of a packaging machine is shown in Figure. Mechanism is working on vertical plane. Link 2 and 4 are massless. Link 3 has a mass of 1,4 kg. Assume that no friction between the mating surfaces and the dimensions of the link 3 are negligible small. Second link length is 0,4 meter and makes an angle of ( e) 41 degrees with the horizontal line. AD=DC (3) B g=981 m/š , 2. A F

A Scotch Yoke mechanism of a packaging machine is shown in Figure. Mechanism is working on vertical plane. Link 2 and 4 are massless. Link 3 has a mass of 1,4 kg. Assume that no friction between the mating surfaces and the dimensions of the link 3 are negligible small. Second link length is 0,4 meter and makes an angle of ( e) 41 degrees with the horizontal line. AD=DC (3) B g=981 m/š , 2. A F

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter2: Axially Loaded Members

Section: Chapter Questions

Problem 2.2.12P: A small lab scale has a rigid L-shaped frame ABC consisting of a horizontal aim AB (length b = 30...

See similar textbooks

Similar questions

A small lab scale has a rigid L-shaped frame ABC consisting of a horizontal aim AB (length b = 30 cm) and a vertical arm BC (length c = 20 cm) pivoted at point B. The pivot is attached to the outer frame BCD that stands on a laboratory bench. The position of the pointer at C is controlled by two parallel springs, each having a spring constant k = 3650 N/m. that are attached to a threaded rod. The pitch of the threads is p = 1.5 mm. If the weight is 65 N. how many revolutions of the nut are required to bring the pointer back to the mark?
Regarding the gyroscope illustrated below, consider that you give a push for a brief moment on the shaft between the arrowhead and the disk (as marked in the figure), pushing directly upward. Determine in what direction the arrowhead end of the shaft will move. Explain your answer with a physical argument?
Under some circumstances, when two parallel springswith constants k1 and k2 support a single mass, theeffective spring constant of the system is given byk 4k1k2/(k1 + k2). A mass weighing 20 pounds stretchesone spring 6 inches and another spring 2 inches. Thesprings are first attached to a common rigid supportand then to a metal plate. As the figure illustrates(see image), the mass is attached to the center of the plate in the distributiondouble spring. Determine the constant of theeffective spring for this system. find the equationof motion if the mass is initially released fromequilibrium position with downward speed of2 ft/sec.
A 30kg mass is tied to a uniform rod whose mass and length are 80-kg and 8-m, as shown below. The rod is attached to the floor via a hinge and makes an angle of 70° relative to the ground; a massless string is also attached to the rod at the ¼ point of the rod and makes an angle of 20° relative to the horizontal. What tension must be provided by the rope so that the system remains in stationary? If at some point the string breaks, what will be the angular acceleration of the system the instant that the string breaks?
The damper AB in the figure si inmersed in gasoline, of relative density 0.75, has a width of 3.17 meters, is hinged at B and has a stop at A. Determine the value of h at the moment of reaching equilibrium.1Kgf = 9.81 N.
Can anyone help me with this question. The Motor (J1=0.46 kg‐m2) is connected to a gearbox (J2 =0.27 kg‐m2 and J3=0.17 kg‐m2) by a steel shaft. The output of the gearbox is connected to a turbine (J4=0.37 kg‐m2 by a second steel shaft. The shafts are supported by bearings (not shown). The gearing in the gearbox is such that theta3=‐2.7theta2. Use Lagrange methods to determine the equation of motion for the system including the flexibility of the shafts, using variables of theta 1, theta 3, theta 4 based on changing theta 3.
PROBLEM The diameter of two pulleys are (0.3m)and (0.2m), center distance (1m).if we use open belt drive. Determine: 1- the length of V-belt (2ß = 60°). 2- the contact angle between belt and smaller pulley. 3- the horse power, if the smaller pulley turn with speed (400r.p.m) and the tension force in tight side (T1=900N), coefficient of friction ų=0.3 4- the speed of large pulley.
In the crank-connecting rod mechanism shown in the figure, the crank rotates with a constant angular velocity (the system operates in the horizontal plane and friction will be neglected). T12 torque for the 10% displacement of the piston at the expansion time,a) Gas force P (piston diameter is 60 mm).b) mass m4Calculate for.(r=10 cm; l=30 cm; AG3=10 cm ; m3=4 kg, m4=3 kg, N=2000 rpm)
1. A pulley 580 mm in diameter transmits 60 kW at 650 1pm by means of belt. Determine the effective belt pull.2. Find the angle of contact on the small pulley for a belt drive with center distance of 75 in. if pulley diameters are 9 in and 18 m, respectively.
A flywheel is fitted to a multi cylinder engine, which runs at a mean speed of 360 r.p.m. If the speed varies from 6 % above the mean to 2 % below it and the fluctuation energy is 1200 kN-cm, If the radius of gyration is 20 cm, find (i) mass moment of inertia of the wheel and (ii) mass of flywheel. The mass moment of Inertia in Kgm2 is Mass of the flywheel in kg is
A shaft having length equal to 10 m and diameter equal to (50+ 01) mm is simply supported at both ends. The shatt carries four masses (150 + 01) kg, (200 + 01) kg, (250 +01) kg and (300 + 01) kg. These masses are located at a distance of 1.5m, 2.5 m, 5.5 mand 7.5 m from the left hand side support, respectively. The modulus of elasticity, E, for the material of the shaft is 200 GN/m? and mass density for the shaft material is 7500 kg/m?3. Determine critical speed of the shaft in revolutions per minute for the following two cases: 1. Effect of the mass of the shaft is neglected. 2. Effect of the mass of the shaft is considered. What is the usefulness of the answers determined in this problem?
der engine has been drawn 0 2 moment diagram for a multicylin ~ 2.4° horizontallv. e = 4500 N-m vertically and 1 mm 'mxemapwd areas between output torque curve and the mean resistance line taken in order from one end are 342. 23, 245. 303. 115. 232. 227. 164 mm2. when the engine is running at 150 r.p.-m- If the mass of the flywheel is 1000 kg and the tota! fluctuation of speed does not exceed 3% of the mean speed. find the minimum value of the radius of gyration 16.4/ The turning