A stepladder of negligible weight is constructed as shown in the figure below, with AC = BC = { = 3.60 m. A painter of mass m = 69.0 kg stands on the ladder d = 3.00 m from the bottom D. B Assuming the floor is frictionless, find the following. (Suggestion: Treat the ladder as a single object, but also treat each half of the ladder separately.) (a) the tension in the horizontal bar DE connecting the two halves of the ladder (b) the normal forces at A and B at A N at B (c) the components of the reaction force at the single hinge C that the left half of the ladder exerts on the right half rightward component upward component

A stepladder of negligible weight is constructed as shown in the figure below, with AC = BC = { = 3.60 m. A painter of mass m = 69.0 kg stands on the ladder d = 3.00 m from the bottom D. B Assuming the floor is frictionless, find the following. (Suggestion: Treat the ladder as a single object, but also treat each half of the ladder separately.) (a) the tension in the horizontal bar DE connecting the two halves of the ladder (b) the normal forces at A and B at A N at B (c) the components of the reaction force at the single hinge C that the left half of the ladder exerts on the right half rightward component upward component

College Physics

11th Edition

ISBN:9781305952300

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter1: Units, Trigonometry. And Vectors

Section: Chapter Questions

Problem 1CQ: Estimate the order of magnitude of the length, in meters, of each of the following; (a) a mouse, (b)...

See similar textbooks

Similar questions

A uniform plank of length 2.00 m and mass 30.0 kg issupported by three ropes, as indicated by the blue vectors inFigure P8.27. Find the tension in each rope when a 700.-Nperson is d = 0.500 m from the left end.
A short cantilever beam is subjected to three forces. If α = 45°, determine the value of F in kN that will make the magnitude of the resultant of the three forces smallest as shown in the figure. Take F1 = 70 kN and F2 = 25 kN.
A uniform plank of length 2.00 m and mass 26.0 kg is supported by three ropes, as indicated by the blue vectors in the figure below. Find the tension in each rope when a 710–N person is d = 0.500 m from the left end. Answer the 3 boxes below:
a ladder 4m long is leaning against a frictionless wall with its lower end 1.6m away from the wall. if the ladder weighs 150n, what forcesdoes it exert on the wall F1 and on the ground F2? show step by step solution with fbd
Two people, let’s call them person A and person B, carry a uniform board of length 6 meters and weight 150 N. Person A is 1 m from one end and person B is 2 m from the other end. What weight does person A support? What weight does person B support?
At the local playground, a 21-kg child sits on the right end ofa horizontal teeter-totter, 1.8 m from the pivot point. On the leftside of the pivot an adult pushes straight down on the teeter-totterwith a force of 151 N. In which direction (clockwise or counterclockwise) does the teeter-totter rotate if the adult applies the forceat a distance of (a) 3.0 m, (b) 2.5 m, or (c) 2.0 m from the pivot?
In the figure, horizontal scaffold 2, with uniform mass m2 = 29 kg and length L2 = 2.3 m, hangs from horizontal scaffold 1, with uniform mass m1 = 54 kg. A 17 kg box of nails lies on scaffold 2, centered at distance d = 0.80 m from the left end. What is the tension T in the cable indicated?
If the forces on the beam are replaced by an equivalent Force-Position system, determine the distance d where the resultant force must be placed. F = 58 N, P = 97 N, Q = 18 N, a = 1.5 m, b = 1.5 m and c = 1.9 m.
A uniform plank of length 2.00 m and mass 31.5 kg is supported by three ropes, as indicated by the blue vectors in the figure below. Find the tension in each rope when a 715–N person is d = 0.500 m from the left end. magnitude of T1 N magnitude of T2 N magnitude of T3 N
The figure shows two tug boats pulling a barge of forces P and Q, where P=76KN and Q=52KN. Using the parallelogram method.
The wheels,axle, and handles of a wheelbarrow weigh W=56N. The load chamber and it’s contents weigh WL=635N.the drawing shows these two forces in two different wheelbarrow designs. To support the wheelbarrow in equilibrium, the man’s hands apply a force to the handles that is directed vertically upward.consider a rotational axis at the point where the tire contacts the ground, directed perpendicular to the plane of the paper.find the magnitude of the man’s force for both designs.
A spade is modelled as a uniform rod, of mass 2kg and length 90cm, attached to a uniform square lamina, of side 20cm and mass 0.5kg. A gardener holds the spade horizontally with hands 30cm and 60cm from the end of the rod. Find the vertical forces exerted by the gardener's hands. Im stuck on this q, pls help.