A substation receives 6000 kVA at 6 kV, 0.8 p.f. lagging on low voltage side of a transformer from agenerating station through a 3-phase cable system having resistance of 7 Ω and reactance of 2 Ω perphase. Identical 6600/33000 V transformers are installed at each end, 6600 V side being delta connectedand 33000 V side star connected. The resistance and reactance of each transformer are 1 Ω and 9 Ωrespectively, referred to h.v. side. Calculate the voltage at the generating station bus bars

A substation receives 6000 kVA at 6 kV, 0.8 p.f. lagging on low voltage side of a transformer from agenerating station through a 3-phase cable system having resistance of 7 Ω and reactance of 2 Ω perphase. Identical 6600/33000 V transformers are installed at each end, 6600 V side being delta connectedand 33000 V side star connected. The resistance and reactance of each transformer are 1 Ω and 9 Ωrespectively, referred to h.v. side. Calculate the voltage at the generating station bus bars

Delmar's Standard Textbook Of Electricity

7th Edition

ISBN:9781337900348

Author:Stephen L. Herman

Publisher:Stephen L. Herman

Chapter28: Three-phase Transformers

Section: Chapter Questions

Problem 2PA

See similar textbooks

Similar questions

An infinite bus, which is a constant voltage source, is connected to the primary of the three-winding transformer of Problem 3.53. A 7.5-MVA,13.2-kV synchronous motor with a sub transient reactance of 0.2 per unit is connected to the transformer secondary. A5-MW,2.3-kV three-phase resistive load is connected to the tertiary Choosing a base of 66 kV and 15 MVA in the primary, draw the impedance diagram of the system showing per-unit impedances. Neglect transformer exciting current, phase shifts, and all resistances except the resistive load.
Three single-phase transformers, each rated 10MVA,66.4/12.5kV,60Hz, with an equivalent series reactance of 0.1 per unit divided equally between primary and secondary, are connected in a three-phase bank. The high-voltage windings are V-connected and their terminals are directly connected to a 115-kV three-phase bus. The secondary terminals are all shorted together. Find the currents entering the high-voltage terminals and leaving the low-voltage terminals if the low-voltage windings are (a) Y-connected and (b) - connected.
A substation receives 6000 kVA at 6 kV, 0.8 p.f. lagging on low voltage side of a transformer from a generating station through a 3-phase cable system having resistance of 7 Ω and reactance of 2 Ω per phase. Identical 6600/33000 V transformers are installed at each end, 6600 V side being delta connected and 33000 V side star connected. The resistance and reactance of each transformer are 1 Ω and 9 Ω respectively, referred to h.v. side. Calculate the voltage at the generating station bus bars [6778 V]
9. A 3-phase transformer rated at 1,000 kVA, 11/3.3 kV has its primary windings wye-connected and its secondary windings delta-connected. The actual resistances per phase of these windings are: r1 = 0.375 Ω, r2 = 0.095 Ω; and the leakage reactances per phase are: x1 = 9.5 Ω, x2 = 2 Ω. Calculate the voltage at the normal frequency which must be applied to primary terminals in order to obtain full-load current in the windings when the secondary terminals are short-circuited. Also, calculate the power input under these conditions.
A 100 kVA, 7,200/480V., 60Hz single-phase transformer has the primary and secondary resistances of 1.96 Ω and 0.008 Ω, and primary and secondary reactances of 4.55 Ω and 0.0151 Ω respectively. Find the primary voltage requiredto produce 480V. at the secondary terminals at full load when the power factor is 0.93 lagging.
A 10 kVA, 2400/240V, single phase transformer has the following resistances and leakage reactances: R1 = 3 ohms, R2 = 0.03 ohms; X1=15 ohms, X2=0.15 ohms. Find the primary voltage required to produce 240V at the secondary terminals at full load, when the load power factor is 0.8 pf leading.
10-KVA, 2400/240 V, single-phase transformer has a secondary equivalent impedance of (0.06 + 10.30) ohms. Find the primary voltage required to produce 240 V at the secondary terminals at full load, 0.8 pf leading. A. 2356 VB. 2348 V C. 2372 V D. 2364 V
Two single phase transformer rated at 11,000/110V are used for scott connected transformers to supply two single phase electric furnaces with a rating of 500KW, 110V (teaser) 0.8pf and 700KW, 80V(main), unity pf respectively. If the supply 3 phase voltage is 11,000V, a. what will be the current flow in each of the three phase lines and b. what will be the KVA rating of each transformer c. If the net core area is 300cm2 and a flux density of 1.3 Wb/m2, determine the number of turns for each winding. Assume a 60Hz frequency
There single-phase transformers are 3 transformers (Each of them is to be connected Delta-Delta) is rated at 50kVA, 2200/400 V , Zeq = 1.4 + j1.8 ohms (Ref. the high-voltage side of the transformer). The high voltage side of the transformer receives 2200 V by the transmission line (impedance of transmission line is 0.15+j0.80 ohms). The Low voltage side of the transformer disburses load by the transmission line (impedance of transmission line is 0.001+j0.003 ohms). Determine Load Voltage when the transformer works at rated by PF=0.85 lagging
2.A 10 kVA, 1000 V / 200 V, 50 Hz, single phase transformer has HV and LV sidewinding resistances as 1.1 Ωand 0.05 Ω respectively. The leakage reactances of HV and LV sides are respectively 5.2 Ω and 0.15 Ωrespectively. Calculate [i] the voltage to be applied to the HV side in order to circulate rated current with LVside shorted, [ii] Also calculate the power factor under this condition.
A 6.6/33 kV transformer substation receives 5 MVA at 6 kV, 0.85 power factor lagging through a cable with per phase resistance and reactance of 8 and 2.5 Ω respectively. Identical 6.6/33 kV transformer is installed at the other, power station end of the cable as indicated on the figure below. The 6.6 kV side is delta-connected while the 33-kV side is star-connected. The resistance and reactance of star windings are 0.5 and 3.75 Ω and for delta windings are 0.06 and 0.36 Ω. What is the voltage at the generator end? Use per-unit format for your calculations.?
A 10 kVA, 2400/240-V single-phase transformer has the following resistances and reactances. Find the primary voltage required to produce 240 V at the secondary terminals at full load, when the power factor is 0.8 lagging. R1 = 3, R2 =0.03, X1 =15, x2 =0.150. Round of answer to whole number.