a)When three inductive loads, each of reactance 9 Ω and resistance 4 Ω are connected in delta which when also connected to a 3-phase supply the loads consume 1.2 kW. Determine the line current and the supply voltage, the phase current and the power factor of the load

a)When three inductive loads, each of reactance 9 Ω and resistance 4 Ω are connected in delta which when also connected to a 3-phase supply the loads consume 1.2 kW. Determine the line current and the supply voltage, the phase current and the power factor of the load

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter2: Fundamentals

Section: Chapter Questions

Problem 2.45P: Two balanced Y-connected loads, one drawing 10 kW at 0.8 power factor lagging and the other IS kW at...

See similar textbooks

Related questions

Q: ABC phase sequential In a three-phase balanced Star-Star connected system, the phase on the source…

A: In the question,ABC phase sequential In a three-phase balanced Star-Star connected system, The phase…

Q: The two-wattmeter method produces wattmeter readings P2 = 800 W Wand P1= 560 W when connected to a…

Q: A balanced star-connected load having an impedance (15+j20) ohms per phase is connected to a…

A: In the question, A balanced star-connected load having an impedance (15+j20) ohms per phase…

Q: Activity No. 2: Three loads are connected in parallel across a 1400 Vrms, 60 Hz single-phase supply…

A: I am attaching detailed solution image of this question.

Q: In the circuit shown below, a three-phase star-connected unbalanced load is connected to a balanced…

A: In this question, We need to determine the value of impedance Zc if voltage difference across the…

Q: 1. A balance Y-connected load of ( 3 + j8 ) ohms per phase is supplied by a balanced three- phase,…

Q: Two balanced three phase loads are connected in parallel, the loads are L1= 20 kW at 0.7 pf lead,…

A: Active Power(P): The power which is deployed and absorbed by the electric circuit to do some useful…

Q: 3. Two electric furnaces are supplied with 1-phase current at 80 V from 3-phase, 11,000-V supply…

Q: 2. Three parallel three-phase loads are supplied from a 207.85-Vrms, 60-Hz three-phase supply. The…

A: 1 Total kW=10+10=20 kW2 For reactive power=Active power of load 1=20 kWPower…

Q: a) Calculate the current in each line. b) Clearly draw the voltage and current phasor diagram. c)…

Q: Each phase of a 3-phase delta-connected load consista of an impedance 2 = 20 260° Q. The line…

A: The solution is given below

Q: In a Y-Y circuit, a three-phase supply has a line voltage of 400 V. It is connected to three loads,…

Q: PROBLEMS (PG. NO: 325) Three inductive loads, each of resistance 40 and reactance 92 are connected…

Q: A delta-connected balanced 3 phase load is supplied from a 3 phase 400 V supply.

Q: A balanced three-phase source is supplying 60 kVA at 0.96 pf leading to two balanced Δ-connected…

A: To determine the types of components connected and their impedance value in each phase of delta…

Q: A factory has the following load with power factor of 0.9 lagging in each phase. Red phase 40 A,…

A: Given IR=40 AIY=50 AIB=60 AV=400 V Taking VRN as reference VRN=4003VRN=230.9 V VRN=230.9∠0°…

Q: Three parallel three-phase loads are supplied from a 207.85-Vrms, 60-Hz three-phase supply. The…

A: Load-1 power is 11 kW. 3*VL*IL*cosϕ=11000IL1=110003*207.85*0.6=50.93 A.IL1=50.93∠-53.13°…

Q: A balanced star connected load of (8+j 6)Ω per phase in connected to a balanced 3-phase 400 V supply…

Q: A star-connected three-phase load absorb 3000 W with power factor 0.433 lagging has a resistance…

A: In Star connection, line current is equal to Phase current. The detailed solution is provided below.

Q: A delta-connected balanced three-phase load is supplied from a three-phase, 380 V supply. The line…

A: Since we can only answer upto 3 sub-parts,I'll answer the first three.If you need help with other…

Q: A delta-connected balanced 3-phase load is supplied from a 3-phase 400 V supply. The line current is…

A: The solution is given below

Q: Please answer the following: 1. A balanced star connected load has an impedance of 6 + j8 ohms per…

A: Balanced three phase system-The balanced system in a 3-phase network is always displaced by 120…

Q: In a three phase Delta-Wye connection a.) What is the relationship between the line to line voltage…

Q: A balanced delta connected load of 14+j16 ohm per phase is connected at the end of three phase line.…

A: Given: A balanced delta connected load per phase impedance=(14+j16) ohm Per phase line…

Q: (b) An unbalanced delta connected load consisting of the phase impedances ZRY (10+j3) N, ZYB (12+j0)…

A: Dear student as per our guidelines we are supposed to solve only one question.kindly repost other…

Q: balance Y-connected load of ( 3 + j8 ) ohms per phase is supplied by a balanced three-phase, 60 Hz,…

Q: A balanced A-connected load 250 + j25 is being supplied by a positive sequence balanced A-conne…

A: Balanced three phase system-The balanced system in a 3-phase network is always displaced by 120…

Q: Figure 2 shows a small 480-V distribution system, Y-connection. Assume that the lines in the system…

A: As per Bartleby Policy we can answer first 3 subparts. Please repost the question for other parts.…

Q: 03) The following two parallel-connected 3-phase balanced loads are fed by a balanced 3-phase…

A: In the question, Two loads are connected in the parallel, Find the complex power = P+jQ form Total…

Q: determine the unknown load.

Q: NOTE: YOU MUST USE THE STANDARD PHASE DIAGRAM TO A THREE-PHASE SYSTEM WITH LINE VOLTAGE OF 230 VAC…

Q: Three parallel three-phase loads are supplied from a 207.85-Vms, 60-Hz three-phase supply. The loads…

A: We will calculate real power and reactive power for each load P=P1+P2 P3 Q=Q1+Q2+Q3 power…

Q: balanced 3-phase delta-connected load consumes a total power of 100 kW at a pf of 0.6 lag, the line…

A: Given, Load is 3 phase delta connected so, VL=Vph VL=1000V PT=100kW cosϕ=0.6 lag

Q: A balanced Y-connected source is connected to a Δ-connected balanced load. The phase voltage of the…

Q: A delta connected load of impedances (6 + j9) ohms each is supplied through a line having an…

Q: When the three identical star-connected coils are supplied with 415 V, 50 Hz, 3- p supply, the 1- p…

A: Given data: PR=12 kWIR=26 AVR=415 V (i) The expression for the power factor is given as,…

Q: A balanced three-phase source furnishes power to the following three loads: Load 1: 6 kVA at 0.83 pf…

Q: Suppose the value of each impedance of a Y-connected three-phase load is 15+j12 ohm. The terminal…

A: Transmission line

Q: Three inductive loads, each of resistance 4 ohms and reactance 9 ohms, are connected in delta. When…

A: RESISTOR (R): A resistor is a passive electrical component with the primary function to limit the…

Q: Home Work 2: Two loads are connected in parallel across a line to line voltage 13 kV three-phase…

A: In this question, Find the value of capacitor to improve the power factor 0.8 lagging. If two loads…

Q: . A wye-connected balanced three-phase load draws 75 A from 230 V, 60 Hz, source. To measure the…

A: The solution is given below

Q: Three purely resistive loads, each of 100 ohms, are connected in wye to a three-phase, 110-V supply.…

Q: A three-phase, three-wire, 240 V ACB system supplies power to a wye-connected load with resistances…

A: In this question, A three-phase, three-wire, 240 V ACB system supplies power to a wye-connected…

Q: A balanced wye connected load of 8 + j6 per phase is connected to a balanced 3-phase 400v supply.…

Q: A three-phase line has an impedance of 0.1 + j0.80/p. The line feeds two balanced three phase loads…

A: When multiple loads are connected at the end terminals, then total current flowing through the line…

Q: . A 234-V, 30 source serves a balanced load consisting of three equal impedances, each of which has…

A: Given: load impedance 6✓ 53.13 degree Calculate: line current, power factor

Q: 1. A wattmeter with its current coil in line 2 and potential coil across lines 2 and 3 is connected…

Q: A 3-phase 4-wire balanced power system with a positive sequence is supplied to a balanced 3-phase…

Q: system has a balanced load connected in star/wye and has a line to line voltage of 230 V, 3-phase…

A: A 3-ph, star-connected balanced load has, Line-to-line supply voltage, VL = 230 V Apparent power,…

Concept explainers

Power Measurement

According to Blondel's theorem, the total power is measured with one less number of wattmeters than the number of wires present in the system. So, a single-phase and two-wire system will require one wattmeter and a single-phase and the three-wire system will require two wattmeters, and a three-phase and the three-wire system will also require two wattmeters and a three-phase and the four-wire system will require three wattmeter devices. The wattmeter is a device that measures power using one voltage and one current input as shown in the above figure. Multiple current or voltage input pair cables are used by many power analyzers and digital storage oscilloscopes (DSOs) for measuring watts, in effect within a single instrument acting as multiple wattmeters. It is possible to measure three-phase and four-wire power with one correctly specified power analyzer.

Question

b)15 A of current is taken by a non-inductive load at 125 V. In order that the same current shall be generated from 240 V, 50 Hz mains. An inductor is now also then connected in series. Note: The resistance of the inductor should be ignored and also assume the waveform to be sinusoidal. Determine the phase difference between the current and the applied voltage, the impedance of the circuit and the inductance of the inductor.

THANKS IN ADVANCE

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

Step 2

Step 3

Step 4

Step 5

Step 6

Step by step

Solved in 6 steps with 10 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, electrical-engineering and related others by exploring similar questions and additional content below.

Similar questions

Let the three-phase electrical system be illustrated in Figure . Knowing that its phase sequence is ABC and that Vcb=380∠135°V, determine the following: a) The value of the line currents demanded by each of the loads and supplied by the source. b) The power and power factor of each load and source. c) The power of the capacitor bank that must be installed to correct the power factor to 0.95 lagging. d) The currents supplied by the source after installing the capacitor bank. e) The percentage reduction of the total apparent power supplied by the source after installing the capacitor bank.
1. A balanced, three-phase, 900V system is supplying a balanced load connected in delta. A three-phase wattmeter (measuring total three-phase power) is connected to the supply and an ammeter is connected to one of the supply phases. Each load consists of a resistance in parallel with an inductive reactance. a. If the wattmeter reads 14.1 kW, what is the resistance of each load? b. If the ammeter reads 10 A What is the impedance (Z) of each load? c. What is the reactance (X)? d. If this load was instead connected in star, what would the new readings be? (P and I).( need only handwritten solution .otherwise downvote.)
A) A factory has the following load with power factor of 0.9 lagging in each phase. Red phase 40 A, yellow phase 50 A and blue phase 60 A. If the supply is 400 V, three phase, four-wire, calculate the current in the neutral and the total active power. Draw a phasor diagram for phase and line quantities. Assume that, relative to the current in the red phase, the current in the yellow phase lags by 120° and that in the blue phase leads by 120°. B) Explain the advantage of connecting the low-voltage winding of distribution transformers in star.
Use 4 decimal places for your finals answers. A system has a balanced load connected in star/wye and has a line to line voltage of 230 V, 3-phase source. The system has an apparent power of 75 kVA and has 86% lagging power factor. a.) Find the real power. b.) Find the line current. c.) Find the impedance per phase . d.) If the source voltage increases to 1.75 kV but the apparent power and power factor remains the same, what will be the new impedance per phase?
A balanced 3-phase delta-connected load consumes a total power of 100 kW at a pf of 0.6 lag, the line voltage being 1000V. Find the value of the reactive component per phase assumingthe resistance and reactance are connected in parallel. Answer should be 22.5 ohms.
The balanced three-phase load shown is fed from a balanced, positive-sequence, three-phase Y-connected source. The impedance of the line connecting the source to the load is negligible. The line-to-neutral voltage of the source is 7200 V. 1. a) Find the reading of the wattmeter in watts. 2. b) Explain how you would connect a second wattmeter in the circuit so that the two wattmeters would measure the total power. 3. c) Calculate the reading of the second wattmeter. 4. d) Verify that the sum of the two wattmeter readings equals the total average power delivered to the load.
A balance 3-phase, inductive delta-connected load is connected to a balance 3-phase, 100V, abc source. Two-wattmeter method is used to determine the total power of this delta load. Wattmeter 1 (W1) and wattmeter 2 (W2) are connected in lines a and c respectively. If W2 reads 900 watts and the power factor of the load is 80%, what will be reading in W1 reading in watts?
A balanced three-phase ∆- connected source has a line voltage 120 V. It is connected to a load via a three-wiretransmission line. The per-phase impedance of the ∆-connected load is 30 + j120 Ω. The impedance of each wireof the transmission line is 2 + j4 Ω.How much power is dissipated by the load? How much power is dissipated in transmission line? Power factor of load?
At the supply side, the line current was measured as 25A and lags the corresponding line-to-neutral voltage by 30 deg. Shown VL is between lines A and B. 1. What is the total real power in kW delivered by the supply? 2. What is the per-phase impedance in ohms, of the unknown delta connected balanced load? 3. If a wattmeter is connected at the source side: Voltage probe measures VAB, and current problem Measures IAa, what will be the wattmeter reading in watts?
Three parallel three-phase loads are supplied from a 207.85-Vrms, 60-Hz three-phase supply. The loads are as follows: Load 1: 8 kW with 0.6 lagging power factor. Load 2: Resistive load of 8 kW. Load 3: capacitor load of 22 kvar. (a) What is the total system kW, kvar, power factor, and the supply current per phase? (b) What is the system power factor and the supply current per phase when the Load-1 and Load-2 are operating but the Load-3 is switched off?
Three parallel three-phase loads are supplied from a 207.85-Vrms, 60-Hz three-phase supply. Theloads are as follows:Load 1: 11 kW with 0.6 lagging power factor.Load 2: Resistive load of 11 kW.Load 3: capacitor load of 9 kvar.(a) What is the total system kW, kvar, power factor, and the supply current per phase?(b) What is the system power factor and the supply current per phase when the Load-1 and Load-2 areoperating but the Load-3 is switched off?
A star-connected three phase power pack is connected to balanced star-connectedload of 2 + j3 Ω. The line current is 2∠0⁰ A. Assuming negligible impedance onthe cable, calculate:a) the phase and line voltages from the source. b) the real and reactive powers of the circuit.