Electric Machine; check image, all question there.The efficiency of 25 kW, 300 V round rotor synchronous motor is 75%. Since the motor circuit parameters are given as r=0.05Ω and X. =1.5 Ω, find the followings for motor with 75% load and cos(Ø) = 0.8 (end) in operation.a)Calculate the current drawn by the motor from the networkb)Calculate the induced pole whell voltage (Ef) ΔνL E,EFig. Equivalent Circuit of Synchronous MachineThe efficiency of a 25 kW, 300 V round rotor synchronous motor is 75 %. Since the motor circuit parameters are given as T0.05N and X, =1.52 find the followings for motor with 75 % load andcos() = 0.8 (end) in operation.a)Calculate the current drawn by the motor from the networkb)Calculate the Induced pole wheel voltage (Ef)О а. Case a : 29.799 ACase b: 105.54 < –10.6469° VО. Саse a : 59.799 ACase b: 207.504 < –10.6469° VO. Case a: 59.899 ACase b: 275.504 < -10.6469° VO d. Case a : 29.799 ACase b: 285.504 < -15.6469° VO e. Case a : 60.1407 ACase b: 136.249 < –31.0939° V

An AC motor is an electrical machine which takes AC electrical input energy and produces mechanical…

Electric Machine; check image, all question there. The efficiency of 25 kW, 300 V round rotor synchronous motor is 75%. Since the motor circuit parameters are given as r=0.05Ω and X. =1.5 Ω, find the followings for motor with 75% load and cos(Ø) = 0.8 (end) in operation. a)Calculate the current drawn by the motor from the network b)Calculate the induced pole whell voltage (Ef)

Electric Machine; check image, all question there. The efficiency of 25 kW, 300 V round rotor synchronous motor is 75%. Since the motor circuit parameters are given as r=0.05Ω and X. =1.5 Ω, find the followings for motor with 75% load and cos(Ø) = 0.8 (end) in operation. a)Calculate the current drawn by the motor from the network b)Calculate the induced pole whell voltage (Ef)

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter11: Transient Stability

Section: Chapter Questions

Problem 11.19P

See similar textbooks

Similar questions

Fill in the data for a 16-ampere electric motor, single-phase, no Code letters. a. Branch-circuit protection, non-time-delay fuses: Normal size _____________AMaximum size _____________A Switch size _____________ASwitch size _____________A b. Branch-circuit protection dual-element, time-delay fuses: Normal size _____________AMaximum size _____________A Switch size _____________ASwitch size _____________A c. Branch-circuit protection instant-trip breaker: Normal setting _____________A Maximum setting _____________A d. Branch-circuit protectioninverse time breaker: Normal rating _____________A Maximum rating _____________A e. Branch-circuit conductor size, Type THHN Ampacity _____________A f. Motor overload protection using dual-element time-delay fuses: Maximum size _____________A
A power plant comprises three turbine-generators rated 1000 MW, 800 MW and 600 MW respectively. The regulation constant of each generator is 0.05 pu based on its own rating. Each unit is initially operating at one-half of its own rating, when the system load suddenly increases by 250 MW. Calculate the following:a) Per-unit area frequency response characteristic on a 1000 MW system base [CR9]b) Steady-state drop in area frequency [CR4]c) The share of the load increase on each generator [CR9]d) Total load on each generator after the increase in system load [CR3]Assume the reference power setting of each turbine is unchanged.
Calculate for full-load and unity p.f., the natural period of oscillation of a 50-Hz, 10,000-kVA, 11-kV alternator driven at 1500 r.p.m. and connected to an infinite bus-bar. The steady short-circuit current is four times the full-load current and the moment of inertia of the rotating mass is 17,000 kg-m2. ANSWER IS [1.148 second]
The data obtained in the idling test performed on a three-phase star-connected asynchronous motor; It is 1200V, 5500W, 9.5A. The data obtained in the short circuit experiment on the same motor is 250V,It is 14500W and 100A. For the case where the slip of the motor is 5%, create the approximate equivalent circuit of the motor (L type equivalent circuit), draw the equivalent circuit, find the values of the circuit elements and MUST AND MUST write them ON THE EQUIVALENT CIRCUIT. R and X values will be used in circuit elements, not Z.
A short shunt compound generator supplies a load of 10 kW at 200 V through a pair of feeder and series field resistance 0.10 ohm. Armature resistance, shunt field resistance and series field resistance are 0.01 ohm, 52.2 ohms and 0.10 ohm, respectively. If the core friction and windage losses amount to 631 watts, the BHP of the driving engine is nearest to
An AC Asynchronous motor has the following parameters; Connected voltage,UN=400V Frequency,f=50hZ Nominal PowerPN=1kW, Breakdown Slip,SBD=0.289 Rotational speed (at nominal),nN=1410min-1 Number of poles=2 Nominal Efficiency ,դ=0.84 Calculate I)Calculate the Apparent Power of Nominal Operation,SL1,N1 II)Calculate the Reactive Power of Nominal Operation per single phase,QL1,N1 III)Calculate the Capacitance of CN1 which has to be connected parallel to the single Phase full power factor at nominal operation
a) What applications / experiments are necessary to find the Rc parameter in the equivalent circuit given in Figure 1? b) Write the value of the Ir 'current given in Figure 1 with a sentence in the idle running test of the 3-phase Asynchronous motor.
A power plant comprises three turbine-generators rated 1000 MW, 800 MW and 500 MW respectively. The regulation constant of each generator is 0.05 pu based on its own rating. Each unit is initially operating at one-half of its own rating, when the system load suddenly increases by 300 MW. Calculate the following:a) Per-unit area frequency response characteristic on a 1000 MW system base.b) Steady-state drop in area frequency [CR4]c) The share of the load increase on each generator.d) Total load on each generator after the increase in system load.Assume the reference power setting of each turbine is unchanged.
QUESTION 1:- (a) A 4-pole, 3-phase, star-connected, 50 Hz synchronous generator, with a synchronous impedance of j24.5 Ω/phase and negligible resistance, delivers 5 MW of power to a 13.8 kV busbar. At this operating point, the excitation is equal to 1.8 p.u. Calculate the phase value of the generated emf (E) and hence calculate the electrical load angle, δ, at which the machine is operating. (b) Sketch a typical operating chart for a salient pole synchronous generator and on the chart identify the following; The Apparent Power limit, The field (excitation) limit, The Real Power limit, A line which represents a constant lagging power factor, The rotor angle for operation at any given point of operation, e.g. rated power and 0.9 power factor lag. (c) A Stamford HCI534F framesize generator has been selected for a stand-alone diesel-generation application. The generator is to operate at 400 V, 50 Hz, with the self-excited (SX) excitation scheme. Datasheet information can be…
electrical machines 3. 400 V 50 Hz, Y-connected, 6-pole synchronous generator per phase synchronous reactance 1.0 Ω at back power factor of 0.9 full load armature current 50 A, friction and wind losses 1.25 kW and core losses at 50Hz full load 1.0 kW and armature resistance and loss are neglected. The excitation current is adjusted so that the no-load output voltage is 400V. According to this; a) Calculate the rotation speed of the generator. b) find the terminal voltages at load with rated current at 0.8 back power factor and unit power factor . c) Calculate the voltage regulation of the generator for power coefficients of 0.8 back and 1.0.
A 2-pole, 50 Hz, 11 kV synchronous generator with a rating of 120 MW and 0.87 lagging power factor has a moment of inertia of 12,000 kg- . Calculate the constants H and M A 4-pole synchronous generator supplies over a short line a load of 60 MW to a load bus. If the maximum steady state capacity of the transmission line is 110 MW, determine the maximum sudden increase in the load that can be tolerated by the system without losing stability
Electric Machine; Consider the above equivalent circuit of Synchronous Machine. The nominal values of a star connected synchronous generator are : 75 MVA, 12.5 kV, 50Hz , 3000 rpm .Since the synchronous reactance of this machine x0= 80% and artery resistance r=1.5 mΩ, calculate the values of induced pole wheel voltage (Ef) a)while the machine is running ohmic(cos(Ø) = 1 at rated load b)while the machine is running ohmic(cos(Ø) = 0.8(end) at rated load