Answered: Example 1 A shaft is transmitting 100…

Example 1 A shaft is transmitting 100 kW at 160 rp.m. Find a suitable diameter for the shaft, if the maximum torque transmitted exceeds the meam by 25%. Take maximum allowable shear stress as 70 MPa.

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter3: Torsion

Section: Chapter Questions

Problem 3.8.5P: A stepped shaft ACB having solid circular cross sections with two different diameters is held...

See similar textbooks

Related questions

Q: A hollow steel shaft transmits 600 kW at 500 r.p.m. The maximum shear stress is 62.4 MPa. Find the…

A: Find the outside and inside diameter .

Q: A shaft 80 mm diameter transmits power at maximum shear stress of 63 MPa. Find the length of a 20 mm…

Q: QUESTION 8 A torque T is applied on an aluminium shaft acting at the ends (see figure). The shaft is…

Q: (8) A steel shaft transmits 30kW @ 1,400rpm. Considering allowable shearing stress based on pure…

A: According to guidelines first question will be done from multiple questions. Please post again for…

Q: 8) A steel shaft transmits 30kW @ 1,400rpm. Considering allowable shearing stress based on pure…

A: Given:P=30 kWN=1400 rpmζ=35 MPaG=83 GPa

Q: Q2. A flange coupling joining two sections of shaft is required to transmit 250 kW at 1800 rpm. If 6…

A: To find: The diameter of the bolt. Given: The power transmitted by the shaft is P=250 kW. The speed…

Q: (8) A steel shaft transmits 30kW @ 1,400rpm. Considering allowable shearing stress based on pure…

A: answer for a. d=0.33099 m

Q: The shaft of an axial flow rotary compressor is subjected to a maximum torque of 1500 N-m and a…

Q: A 7/8 in. diameter shaft made out of ductile material is used to transmit power from motor. The…

A: given diameter of the shaft, d=78inch=0.875inchmaximum allowable sheer stress, ζhallow=14.5ksiRPM,…

Q: A solid steel shaft has to transmit 75Kw power at 200 pm. Taking allowable shear stress 70Mpo. Find…

Q: Design a key to transmite 40 kw power by a shaft of 50 mm diameter which rotates 1200 r.p.m , if the…

A: Power P=40 kW Shaft diameter d=50 mm Speed N=1200 rpm Permissible shear stress τ=35Nmm2 Crushing…

Q: A shaft 80 mm diameter transmits power at maximum shear stress of 63 MPa. Find the length of a 20 mm…

A: Find the length of key .

Q: Figure 2: cylindrical shaft

Q: A shaft ABC rotates at 500rpm and is driven through a coupling at the end A. At B a pulley takes off…

A: Given data:

Q: Find the diameter of a solid steel shaft to transmit 43kW at 5.25 rps. The ultimate shear stress for…

A: The shaft is a device which is used to transmit power from one place to another. The torque…

Q: A generator shaft in a small hydroelectric plant turns at 120 rpm and delivers 38 kW (see figure).…

A: Torque is the force measure to rotate an item around an axis. The torque can therefore be defined as…

Q: .A hollow steel shaft transmits 600 kW at 500 r.p.m. The maximum shear stress is 62.4 MPa. Find the…

A: We are authorized to answer one question at a time since you have not mentioned which question you…

Q: A full quarter-circular fillet is used atthe shoulder of a stepped shaft having diameterD2 =1.0 in.…

A: Diameter of step 2 D2 = 1 in Applied torque T =500 lb-in let the maximum shear stress at the stress…

Q: A shaft running at 700 r.p.m transmits 18 kW. Assuming allowable shear stress in shaft is 70 N/mm²,…

Q: Example 7.8: (Application of equation(7.42) for a thin hollow circular bar) (a) Obtain the value of…

Q: A shaft running at 400 r.p.m. transmits 10 kW. Assuming allowable shear stress in shaft as 40 MPa,…

A: Note: Since you have asked multiple question, we will solve the first question for you. If you want…

Q: 3.44. A circular shaft having diameters D and d and a groove of radius r (see Fig. 3.17, with M=0…

Q: A hollow aluminum tube used in a roof structure has an outside diameter d:z= 104mm and an inside…

Q: A shaft supported on bearings 200mm apart transmits 187 kW at 200rpm. The maximum bending moment is…

Q: A motor drives a shaft at 56 Hz and delivers 11 kW of power (see figure). 56 Hz 11 kW (a) If the…

Q: subjected to pure tor s the inner radius n. strain in the tube is m

Q: A Steam Turbine GE 600D supplies "P" in kW at 8 Hz to shaft 1 shown in Figure Below. 40% of the "P"…

A: Permissible stress is stress which produces due to pressure or forces which does not exceed the…

Q: 3. Find the diameter of a solid steel shaft to transmit 27 kW at 300 r.p.m. The ultimate shear…

A: Given:-Power, P=27 kWSpeed, N=300 rpmUltimate shear stress, τu=360 MPaFactor of safety, FOS=8Ratio…

Q: The shaft of an axial flow rotary compressor is subjected to a maximum torque of 2000 N-m and a…

Q: 3. A steel shaft transmits 30KW at 1500rpm. Considering allowable shearing stress of degrees 351.6…

Q: A steel (E= 207 GPa, v =0.3) collar with a 5 mm outside diameter and a 30.00 mm hole diameter will…

Q: A shaft supported at the ends in ball bearings carries a straight tooth spur gear at its mid span…

Q: A hollow steel shaft transmits 600 kW at 500 r.p.m. The maximum shear stress is 62.4 MPa. Find the…

Q: A solid circular shaft to transmit,80kw power at 200rpm.calculate the shaft diameter and strain…

Q: A shaft running at 400 r.p.m. transmits 10 kW. Assuming allowable shear stress in shaft as 40 MPa,…

A: GivenN=400rpmP=10kWσa=40MPa

Q: A 7/8 in. diameter shaft made out of ductile material is used to transmit power from motor. The…

Q: Design a suitable diameter for a circular shaft required to transmit 90 kW at 180 r.p.m. The shear…

A: GIVEN DATA- MAXIMUM SHEAR STRESS = 70MPa POWER P=90KW SPEED N=180 r.p.m. MAXIMUM TORQUE = 140% OF…

Q: Example 7.5: (Numerical problem of a circular shaft) A circular shaft 10 cm diameter and 1.1 m…

Q: uter diameter 60 mm and inner diameter 40 mm) is running at 43 Hz. If the shaft transmits 156 kW,…

Q: A shaft ABCD 70 mm in diameter is subjected to torques of 1500 N-m at B and 1100 N-m at C acting in…

Q: A thin tube of uniform thickness 5 mm and square cross section, shown below, is subject to a torque…

Q: for, the Shaft Shown in the figure Find: JS 1 maximum, Shear stresses in whole shaft? angle of twist…

A: INTRODUCTION : When torque is applied to the shaft, the shaft is susceptible to both twisting and…

Q: A circular steel tube of length L = 1.1 m is loaded in torsion by torques T (see figure). T 12 (a)…

A: a) The given values are - L=1.1 m=1100 mm, r1 =51mm, θ=0.5°=0.5×π180radThe shear strain is given by…

Q: The shaft of an axial flow rotary compressor is subjected to a maximum torque of 2000 N-m and a…

Q: A torque of Tx=200Nm and a torque of Mz=260Nm are applied to the stepped shaft in the figure.…

A: Given data as per question Tx=200Nm Torque Mz=260Nm Larger diameter =400 mm Smaller diameter=150 mm…

Q: A drilling riser is used to drill a 4km deep hole into the seabed. The riser can be approximated as…

A: Given. G= 89 Gpa , d_o = 185 mm d_i = 160 mm P= 230 Kw N= 75 rpm

Q: A shaft running at 400 r.p.m. transmits 10 kW. Assuming allowable shear stress in shaft as 40 MPa, *…

Concept explainers

Combined Loading

Any functioning component, such as machine parts, structural members, pressure vessels, and so on, are all under the influence of more than one force. When anybody is under the influence of more than one force such as shear forces, bending moments, axial forces, torsion, and so on, then such body is said to be under combined loading. A very practical example of combined loading is the crankshaft of an internal combustion engine (IC engine). The crankshaft of the IC engine is under high rpm, which is caused due to the torsional forces. Due to the presence of piston, counterbalances, and internal imbalances, the crankshaft experiences lateral forces and due to the rise in temperature, the crankshaft undergoes thermal expansion, which pulls the crankshaft along the axial direction and lateral direction. The presence of unbalanced loads along the periphery of the crankshaft also induces a bending moment.

Question

Example 1
A shaft is transmitting 100 kW at 160 rp.m. Find a suitable diameter for the
shaft, if the maximum torque transmitted exceeds the meam by 25%. Take maximum allowable shear
stress as 70 MPa.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step 3

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 3 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

The stepped shaft shown in the figure is required to transmit 600 kW of power at 400 rpm. The shaft has a full quarter-circular fillet, and the smaller diameter D1= 100 mm. If the allowable shear stress at the stress concentration is 100 MPa, at what diameter will this stress be reached? Is this diameter an upper or a lower limit on the value of D2?
A thin tubular shaft with a circular cross section (see figure) and with inside diameter 100 mm is subjected to a torque of 5000 N · m. If the allowable shear stress is 42 MPa, determine the required wall thickness t by using (a) the approximate theory for a thin-walled tube and (b) the exact torsion theory for a circular bar.
A stepped shaft ACB having solid circular cross sections with two different diameters is held against rotation at the ends (sec figure). If the allowable shear stress in the shaft is 6000 psi, what is the maximum torque (T0) that may be applied at section C? Find (T0)max if the maximum angle of twist is limited to 0.55º. Let G = 10,600 ksi.
A thin-walled steel tube having an elliptical cross section with constant thickness t (see figure) is subjected to a torque T = 18 kip-in. Determine the shear stress and the rate of twist in degrees per inch) if G = 12 × 106 psi, t = 0.2 in., a = 3 in., and b = 2 in. Note: See Appendix E, Case 16, for the properties of an ellipse.
A full quarter-circular fillet is used at the shoulder of a stepped shaft having diameter D2= 1.0 in. (see figure), A torque T = 500 lb-in. acts on the shaft. Determine the shear stress at the stress concentration for values as follows: D1= 0.7,0.8, and 0.9 in. Plot a graph showing versus D?
What is the maximum power that can be delivered by a hollow propeller shaft (outside diameter 50 mm, inside diameter 40 mm, and shear modulus of elasticity 80 GPa) turning at 600 rpm if the allowable shear stress is 100 MPa and the allowable rate of twist is 3.0°/m?
A stepped shaft consisting of solid circular segments having diameters D1= 2.0 in, and D2= 2.4 in. (see figure) is subjected to torques T. The radius of the fillet is R = 0,1 in. If the allowable shear stress at the stress concentration is 6000 psi, what is the maximum permissible torque Tmax?
A stepped shaft ACB having solid circular cross sections with two different diameters is held against rotation at the ends (see figure), (a) If the allowable shear stress in the shaft is 43 MPa, what is the maximum torque (T0)max that may be applied at section C? (b) Find (ï^),^ if the maximum angle of twist is limited to 1.85', Let G = 28 GPa.
A torque T is applied to a thin-walled tube having a cross section in the shape of a regular hexagon with constant wall thickness t and side length b (see figure). Obtain formulas for the shear stress rand the rate of twist
When drilling a hole in a table leg, a furniture maker uses a hand-operated drill (see figure) with a bit of diameter d = 4.0 mm. If the resisting torque supplied by the table leg is equal to 0.3 N · m, what is the maximum shear stress in the drill bit? If the allowable shear stress in the drill bit is 32 MPa, what is the maximum resisting torque before the drill binds up? If the shear modulus of elasticity of the steel is G = 75 GPa, what is the rate of twist of the drill bit (degrees per meter)?
A hollow steel shaft used in a construction auger has an outer diameter d2= 6.0 in. and inner diameter d1= 4.5 in. (see figure). The steel has a shear modulus of elasticity G = 11.0 × 106 psi. For an applied torque of 150 kip-in., determine the following quantities: shear stress at the outer surface of the shaft, shear stress at the inner surface, and rate of twist (degrees per unit of length). Also, draw a diagram showing how the shear stresses vary in magnitude along a radial line in the cross section.
. A segment of a generator shaft with a hollow circular cross section is subjected to a torque T = 240 kip-in, (see figure). The outer and inner diameters of the shaft arc 8.0 in, and 6.25 in., respectively. What is the maximum permissible compressive load /'that can be applied to the shaft if the allowable in-plane shear stress is rAi(m= 6250 psi