Problem 11.24Figurew3 m3 m1 of 1 >▼Part AW =Determine the maximum uniform loading w the W 310 x 21 beam will support if the allowable bending stress isJallow = 130 MPa and the allowable shear stress is Tallow = 92 MPa.(Figure 1)Express your answer using three significant figures.SubmitIVE ΑΣΦ. It IvecRequest Answer< Return to Assignment Provide FeedbackP Pearson?(~kN/m6 of 6

Draw the free-body diagram of the beam.

Figure 3m 1 of 1 Part A Determine the maximum uniform loading w the W 310 x Jallow = 130 MPa and the allowable shear stress is Tallow (Figure 1) Express your answer using three significant figures. W= Submit 10 ΑΣΦ | 11 Request Answer < Return to Assignment vec 3 Provide Feedback 21 beam will support if the allowable bending stress is = 92 MPa. ? kN/m

Figure 3m 1 of 1 Part A Determine the maximum uniform loading w the W 310 x Jallow = 130 MPa and the allowable shear stress is Tallow (Figure 1) Express your answer using three significant figures. W= Submit 10 ΑΣΦ | 11 Request Answer < Return to Assignment vec 3 Provide Feedback 21 beam will support if the allowable bending stress is = 92 MPa. ? kN/m

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

What is the largest bending stress, Fb , for the beam cross-section shown when M= 1480k-ft and Ix=68101 in4?
A loaded beam, 60 mm wide by 100 mm high and 6 m long, has the shear and moment diagrams as shown below. Determine (a) the magnitude, type and location of the maximum flexural stress (in MPa) (b) the stress (specify the type) in a fiber 30 mm from the top of the beam at a section 3.5 m from the left end. I = bh3/12
An I section symmetrical beamhas 200mm wide flange and overall depth of 500mm. Each flange is 25mm thickand the web is 20mm thick. Determine the maximum bending moment that should be imposed in the sectionif the tensile or the compressive stressis not to exceed 40MN/m^2 and what percentage of the moment is resisted by flange or web?
Compute the shear capacity (?vVn) for the following beams of A992 steel: (A) W 24 × 94, (B) W 12 × 45, and (C) W 10 × 33.
What is the max bending stress in ksi about the x axis for a W12x50 beam with a 43.6 k-ft max moment? Provide 2 decimals
A simply supported beam is subjected to a uniform service dead load of 1.2 kips/ft (including the weight of the beam), a uniform service live load of 1.8 kips/ft. The beam is 40 feet long, and it has continuous lateral support. If A992 steel is used, and the live load deflection must not exceed L/360, Is a W30 x 99 adequate? (for moment, shear, and deflection).
Determine from the beam and the loads shown: Reactions on supports Shear force diagram Bending moment diagram The neutral axis The moment of inertia The first moment of area Consider a section located 1100 mm from point A. Determine: The maximum normal stress of the section The maximum shear stress of the section Deflection The slope
Calculate the maximum normal bending stress and the maximum shear stress
The beam shown will be constructed from a standard steel W-shape using an allowable bending stress of 40.4 ksi. Assume P = 51 kips, L1=6.6 ft, and L2=19.8 ft. (a) Determine the minimum section modulus required for this beam. (b) From the table below, select the lightest W shape that can be used for this beam. (c) What is the total weight of the steel beam itself (i.e., not including the loads that are carried by the beam)?
The beam in (Figure 1) is made from three boards nailed together as shown. If the moment acting on the cross section is M=500N⋅m, determine the maximum bending stress in the beam. Express your answer to three significant figures and include appropriate units.
Q26 A Cantilever beam of dimension 12 m x 40 mm x 60 mm. It carries a uniformly distributed load of 550 kN/m for entire span. Determine (a) Maximum stress due to bending and (b) Young's modulus of the material used for the beam, if it deflects 3.5 m maximum at the free end of the span. Also find the maximum slope of the beam.
6.68 The manufactured wood beam carries the concentrated loads shown. What is the maximum safe value of P if the working stress in shear is 6 MPa?