Homework• A water tank 3m in diameter and 6m high is made from a steel havinga thickness of 12mm.(a) When the tank is filled with water determine the circumferentialstress.(b) Determine the longitudinal stress at the bottom of the tank when itis filled with water.(c) If the circumferential stress is limited to 5 MPa, what is themaximum height of water to which the tank maybe filled. 2. A cylindrical tank has an internal pressure of 1.5 MPa.a. Detemine the diameter of the cylindrical tank if the strength per meter of longitudinal jointis 480 kN.b. Detemine the diameter of cylindrical tank due to strength of girth joint of 200 kN.c. Determine the minimum thickness of the cylindrical tank if the stress is limited to 40 MPa.

Note: Hi! Thank you for the question as per the honour code, we’ll answer the first question since…

Homework • A water tank 3m in diameter and 6m high is made from a steel having a thickness of 12mm. (a) When the tank is filled with water determine the circumferential stress. (b) Determine the longitudinal stress at the bottom of the tank when it is filled with water. (c) If the circumferential stress is limited to 5 MPa, what is the maximum height of water to which the tank maybe filled.

Homework • A water tank 3m in diameter and 6m high is made from a steel having a thickness of 12mm. (a) When the tank is filled with water determine the circumferential stress. (b) Determine the longitudinal stress at the bottom of the tank when it is filled with water. (c) If the circumferential stress is limited to 5 MPa, what is the maximum height of water to which the tank maybe filled.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

The velocity distribution near the solid wall at a section in a laminar flow is given by u = 5.0 Sin (5πy) for y ≤0.10 m. Compute the shear stress at y=0, (ii) y=0.06 m and (iii) y=0.12 m.. The dynamic viscosity of the fluid is 5 poise.
A vertical cylindrical tank 2 m in diameter and 3.5 m high has two steel hoops with diameter of 12mm, 100 mm from both ends. It contains water to a height of 3 m. Determine: a. Total hydrostatic force b. Tensile stress in each hoop
A cylindrical tank has a mean radius of 40 cm and thickness of 10 cm. It is subjected to an external pressure of 140 kg/cm2 and maximum internal pressure is 900 kg/cm2 . Determine the maximum internal tangential stress of the tank. A. 3,884.7 kg/cm2 C. 1.7684 kg/cm2 B. 4,623.6 kg/cm2 D. 2,947.5 kg/cm2
6.3 Determine the wall shearing stress in a pipe of diameter 100mm, which conveys water. The velocities at the half the diameter from boundary is 2 m/s. The local velocity at 20mm from the pipe wall is 1.5m/s and the flow is turbulent,
The wall thickness of a 4-m-diameter spherical tank is 3/4 in. Calculate the allowable internal pressure if the stress is limited to 60MPa
1. A barrel contains 0.2-meter layer of oil floating on water that is 0.4 millimeter deep. If the density of the oil is 600 kg/m^3, find the gage pressure at the oil-water interface. 2. A dam having a triangular section has a vertical face 30m high and base 15m wide. Use SG= 2.4. Determine the height of water that could rise on the vertical side of the dam so that the location of the resultant force is 5 meters from the toe.
A rectangular tank 6 m long, 3 m wide and 2m deep contains water to a depth of 1 m. It is accelerated horizontally at 2.5 m/s2 in the direction of its length. A. Determine the net force due to water acting on each end of tank. B. Determine the minumum pressure intensities at bottom C. Determine the slope of the free surface
A hollow circular plate of 2m external diameter and 1m internal diameter is immersed vertically in water such that the center of the plate is 4m deep from water surface. Find the depth of the center of pressure of the plate.
Calculate the pressure difference between A and B for the set up shown in figure
From the given figure. Determine the total active lateral pressure at the interface in kPa.
An inverted right circular conical tank loses water out of a 4-in hole at the bottom. The radius of the top of the tank is 8 ft and its total height is 20 ft. Assume that the coefficient of contraction is 0.6. Solve for dh/dt. Solve for dV/dt.
A concentrated load of 1700 kN is applied at the ground surface. Compute the vertical pressure (i) at a depth of 7m below the load, (ii) at a distance of 5 m at the same depth. Use Boussinesq's and Westergaard’s equations.