In a modern jet engine, air passes through the following states from the inlet to the outlet, as shown in Figure 1: (a) Pressure (kPa) Temperature (K) (b) (c) State State 1 80 State 2 State 3 State 4 State 5 80 3300 3200 400 For this problem, you may neglect any heat transfer, as well as neglect kinetic energy except at the outlet (state 5). Use the tables for obtaining properties (do not assume constant specific heat). Assume air is an ideal gas with ideal gas constant of R = 0.287 kJ/kg-K. 260 780 1500 900 640 Use the appropriate conservation equations and make approximations (and justify them) to find the compressor specific work. In a similar manner, find the turbine specific work. And finally, using similar arguments, find the nozzle exit velocity.

In a modern jet engine, air passes through the following states from the inlet to the outlet, as shown in Figure 1: (a) Pressure (kPa) Temperature (K) (b) (c) State State 1 80 State 2 State 3 State 4 State 5 80 3300 3200 400 For this problem, you may neglect any heat transfer, as well as neglect kinetic energy except at the outlet (state 5). Use the tables for obtaining properties (do not assume constant specific heat). Assume air is an ideal gas with ideal gas constant of R = 0.287 kJ/kg-K. 260 780 1500 900 640 Use the appropriate conservation equations and make approximations (and justify them) to find the compressor specific work. In a similar manner, find the turbine specific work. And finally, using similar arguments, find the nozzle exit velocity.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Air flows into a turbine at a rate 30 [m 3 /s], a temperature of 1100 [K] anda pressure of 300 [kPa]. The turbine’s work output is 200 [kJ/kg]. Determine thetemperature of the air at the exit, the power output in [kW] and the isentropicefficiency. The pressure ratio of the turbine is 3. The specific gas constant, R, for airis 0.287 [kJ/kg-K].
20 - Helium enters a continuous flow compressor at 336 K and leaves at 451 K. If the mass flow rate is 1.4 kg/s, which of the following is the required power? (Cp = 5.1926 kJ/kgK) a) 927.9 kW B) 895.7 kW NS) 617.9 kW D) 836.0 kW TO) 988.7 kW
Steam expands isentropically in a converging/diverging nozzle from inlet conditionsof 1400 kPa, 325°C, and negligible velocity to a discharge pressure of 140 kPa. At thethroat, the cross-sectional area is 6 cm2. Determine the mass flow rate of the steamand the state of the steam at the exit of the nozzle.
explain in a structured way about the relationship between gibs free energy, enthalpy and entropy at the laws of thermodynamics!
In an adiabatic turbine, this steam flow is 50 kg / s. The power produced by the turbine is 29 MW.Steam enters the turbine with a pressure of 50 bar and a speed of 60 m / s. At the outlet, at a pressure of 0.06 barIt comes out as saturated water with a speed of 130 m / s. Accordingly, the heat lost by the turbine andFind the turbine inlet and outlet temperatures of steam
. Steam at an initial enthalpy of 100 kJ/kg and inlet velocity of 100 m/s, enters an insulated horizontal nozzle. It leaves the nozzle at 200 m/s. Determine the exist enthalpy (in kJ/kg).
At a particular stage of a reaction turbine the mean blade speed is 140 m/sec and the steam is at a pressure of 20 bar with temperature of 250° C. Fixed and moving blades at this stage have inlet angles 30° and exit angles 20°. The stage efficiency is 80%. Determine (1) Specific entholpy drop across the stage in kJ/kg.
Helium expands polytropically steadily through a turbine according to the process pV1.5=C. The inlet temperature is 1000°K, inlet pressure 1000 kPa, and the exit pressure is 150 kPa. The turbine produces 100,000 kW. Determine (a) the exit temperature; (b) the mass flow rate kg/sec.RHe= 2.077 kJ/kg.K; k=1.666. And draw the P-V and T-S diagram.
Steam enters a turbine at 10,000 kPa and 500 °C, and exhausts at 100 °C with an enthalpy of 2000 kJ/kg. The mass flow rate is m=4.5 kg∙s-1. What is the specific volume (m3/kg) of the exiting stream?
The gain in entropy during an isothermal nonflow process of 5 lb of air at 60 Fahrenheit is 0.462 BTU/ o R. What is a) the ratio V2 /V1 , b) the ratio P2 /P1 , c) Work (BTU)
Assuming the clearance is negligible for a single stage compressor with the following data.Atmospheric pressure: 90 kPaAtmospheric temperature: 17 ˚CDelivery pressure: 7 barFree air delivery flow rate: 0.2 m3/min Take “n” as 1.3, cp = 1.005 kJ/kg K, cv = 0.718 kJ/kg K 1.Evaluate the mass flow rate of air inside the compressor operating isentropically in kg/min to 3 decimal places.
EMERGENY!!!! A perfect gas of adiabatic type expands from 1200K and 900kPa to 700k. Calculate the volumetric flow at the turbine inlet when the power generated by the turbine is 400kW. (CP=1.13kj/kg K Cu =0.83kj/kg K VE R=0.30 kj/kgK )