In a thermal power plant, an adiabatic steam turbine operating at steady state with inlet conditions at pressure of 30 bar, temperature of 350°C and mass flow rate of 10 kg/s. Half of the steam is extracted at the first exit at pressure of 5 bar and temperature of 200°C. The remaining steam leaves the second exit at pressure of 0.15 bar and a quality of 0.9. Neglect the change in kinetic and potential energy and the surroundings is assumed to be a temperature of 25°C and atmospheric pressure. Determine: a) The total work produced by the turbine (in kW) b) The exergy destruction (in kW) c) The second law efficiency of the turbine d) It is pronosed to modify the turbine blade in order to increase the nerformance

In a thermal power plant, an adiabatic steam turbine operating at steady state with inlet conditions at pressure of 30 bar, temperature of 350°C and mass flow rate of 10 kg/s. Half of the steam is extracted at the first exit at pressure of 5 bar and temperature of 200°C. The remaining steam leaves the second exit at pressure of 0.15 bar and a quality of 0.9. Neglect the change in kinetic and potential energy and the surroundings is assumed to be a temperature of 25°C and atmospheric pressure. Determine: a) The total work produced by the turbine (in kW) b) The exergy destruction (in kW) c) The second law efficiency of the turbine d) It is pronosed to modify the turbine blade in order to increase the nerformance

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Steam at a massflow rate of 10 kg/s at 5 MPa and 600 °C enters an insulated turbine operating at steady state and exits as saturated vapor (x = 1) at 56 kPa. Kinetic and potential energy effects are negligible. [7.5] a) Calculate the work output of the turbine. [5] b) Does the expansion process inside this particular turbine occur in a reversible or irreversible way ? Please briefly explain your reasoning. [5] d) Sketch the process path inside the turbine in a T-S diagram. Include the two-phase region in your diagram as well. [7.5] c) Calculate the isentropic efficiency of the turbine show linear interpolation
A turbine operating under steady-flow condition receives steam at the following state: pressure,13.8bar; specific volume 0143 m3 /kg, and velocity 30m/s. The state of the steam leaving the turbine is as follow: pressure 0.35 bar, specific volume 4.37 m3/kg and velocity 90 m/s. The difference in elevation is negligible. Heat is rejected to the surrounding at the rate of 0.25 kW, the turbine develops 103kW of power and the rate of steam flow through the turbine is 0.5 kg/s. Calculate the change in internal energy of the steam
Refrigerant 22 enters a compressor operating at steady state and is compressed adiabatically to a higher pressure. Would you expect the power input to the compressor to be greater in an internally reversible compression or an actual compression?
Steam enters a heat exchanger operating at steady state at 250kPa and a quality of 90% and exits as saturated liquid at thesame pressure. A separate stream of oil with a mass flow rate of29 kg/s enters at 20oC and exits at 100oC with no significantchange in pressure. The specific heat of the oil is c = 2.0 kJ/kg K.Kinetic and potential energy effects are negligible. If the heattransfer from the heat exchanger to its surroundings is 10% ofthe energy required to increase the temperature of the oil,determine the steam mass flow rate, in kg/s.
A Steam turbine operates under steady flow conditions receiving steam at the following state: Pressure 15 bar, internal energy 2700kj/kg; specific volume 0.17m3/kg and velocity 100m/sec. The exhaust steam from the turbine is at 0.1 bar with internal energy 2175kj/kg. specific volume 15m³/kg and velocity 300m/sec. The intake is 3m above the exhaust. The turbine develops 35KW and the heat lost over the surface of the turbine is 20kj/kg. Determine the steam flow rate through the turbine
Steam enters a well-insulated turbine operating at steady state at 4 MPa with a specific enthalpy of 3015.4 kJ/kg and a velocity of 10 m/s. The steam expands to the turbine exit where the pressure is 0.07 MPa, specific enthalpy is 2500 kJ/kg, and the velocity is 90 m/s. The mass flow rate is 30 kg/s.Neglecting potential energy effects, determine the power developed by the turbine, in kW.
During a reversible process, 1.44 kg/s of gas rejects 316.3 kJ/s of heat isothermally at 24.2°C. For this gas, Cp 2.14 kJ/kg K and c, = 1.62 kJ/kg K. The initial pressure is = 590.1 kPa. Determine the work steady flow of the process in hp if APE = 2.6 kJ/s and AKE 5.7 kJ/s.
A turbine operating under steady-flow conditions receives steam at the following state: pressure, 13.8 bar; specific volume 0143 m3/kg, and velocity 30 m/s. The state of the steam leaving the turbine is as follows: pressure 0.35 bar, specific volume 4.37 m3/kg, and velocity 90 m/s. The difference in elevation is negligible. Heat is rejected to the surroundings at the rate of 0.25 kW, the turbine develops 103 kW of power and the rate of steam flow through the turbine is 0.5 kg/s. Calculate the change in internal energy of the steam
A steady flow compressor handles 113.3 m3/min of nitrogen measured at intake where p1 = 97.22 kPa and t1 = 26.7°C. Discharge is at 310.27 kPa. The change of kinetic energy is negligible. For each of the following cases, determine the temperature t2 and the work if the process is (a) an isentropic, (b) an internally reversible polytropic with n = 1.34, (c) an irreversible adiabatic with a compressor efficiency of nc = 80%, (d) an isothermal. Solve this problem from the view point of energy diagrams. Does –ò V dp represent anything asked for?
Steam enters a converging-diverging nozzle operating at steady state with P-40 bar, T-400°C, and a velocity of 10 m/s. The steam flows through the nozzle adiabatically and no significant change in elevation. At the exit, p2=1.5 MPa, and the velocity is 665 m/s. The mass flow rate is 2 kg/s. Determine the exit area of the nozzle, in (m²). also, drive the (T-V) diagram for the steam.
In a refrigerant-cooling system, 1.5 kg/s of refrigerant 134a flows at steady state through a coil having an inside diameter of 0.05 m. The refrigerant enters the tube as superheated vapor at 700 kPa and 70°C and leaves at 32°C and 690 kPa. You want to heat the water from of 25°C to 35°C by placing the coil inside a box and having the water enter and leave the box at a constant mass flow rate. Please answer the following: Please answer the following. a. Create a schematic that accurately describes the situation given in the problem. Include your chosen boundary and the energy interactions present across the boundary. You will select from which side the cold water enters the box; that is, closer to the inlet of the refrigerant at 70°C or closer to the exit of the refrigerant at 32°C. b. Represent the process for the refrigerant on a T-v diagram. Show the isobars corresponding to each state with their value. Include values on the axes using customary units. c. For this part you are going…
In a steady-state operating power plant, saturated liquid H2O at 122 deg C is fed to a boiler at 3.756 m/s through a pipe (0.03 m diameter). It leaves the boiler at 9 bar and 88.7 m/s. Then, it enters the turbine through a constant 0.13 m diameter pipe. The exit pipe of the turbine is 0.3 m in diameter and T = 310ºC while P = 1.37 bar. If 2.5 kg/s water is fed and there is change in KE, prove that the fluid enters the turbine at 637.06 deg C.