In the figure above, blocks A and B have 50 and 10 kg respectively. It is given that thecoefficients of friction between all surfaces of contact are static friction=0.4 and kinetic friction=0.3.a) If P=0, determine the acceleration of B and the tension in the chord?b) If P=10, determine the acceleration of B and the tension in the chord?c) If P=100, determine the acceleration of B and the tension in the chord? Q.2)B25°Figure 1In the figure above, blocks A and B have 50 and 10 kg respectively. It is given that thecoefficients of friction between all surfaces of contact are µk = 0.3 and Hs = 0.4.a) If P=0, determine the acceleration of B and the tension in the chord?b) If P=10, determine the acceleration of B and the tension in the chord?c) If P=100, determine the acceleration of B and the tension in the chord?

Answered: Image /qna-images/answer/5161d36f-435f-4942-9f01-3d5e8403f4cc.jpg

In the figure above, blocks A and B have 50 and 10 kg respectively. It is given that the coefficients of friction between all surfaces of contact are static friction=0.4 and kinetic friction=0.3. a) If P=0, determine the acceleration of B and the tension in the chord? b) If P=10, determine the acceleration of B and the tension in the chord? c) If P=100, determine the acceleration of B and the tension in the chord

In the figure above, blocks A and B have 50 and 10 kg respectively. It is given that the coefficients of friction between all surfaces of contact are static friction=0.4 and kinetic friction=0.3. a) If P=0, determine the acceleration of B and the tension in the chord? b) If P=10, determine the acceleration of B and the tension in the chord? c) If P=100, determine the acceleration of B and the tension in the chord

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter7: Dry Friction

Section: Chapter Questions

Problem 7.78P: The figure shows a steel bar being processed by a rolling mill. Given that P=80kN and r =0.016,...

See similar textbooks

Similar questions

consider the mass and pulley system in the attached file. mass m1 = 29 kg and mass m2 = 12kg. the angle of the inclined plane is given and the coefficient of kinetic friction between mass m2 and the inclined plane is uk = 0.12. assume the pulleys are massless and frictionless when mass m2 moves a distance 4.94 m up the ramp, how far downward does mass m1 move? d= ?
Consider the system shown below. The incline plane is fixed and the coefficient kinetic friction between M and 2M is ?1, and coefficient kinetic friction between the plane and 2M is ?2. Let M=2.0kg, ?=22o, ?1=0.14, and ?2=0.25. (a) What is the magnitude of the frictional force on mass M? (b) What is the magnitude of the total frictional force on mass 2M? (c) What is the acceleration of mass M? (d) What is the acceleration of mass 2M?
..A crane is to raise a load of 25,000 N at an acceleration of 1 m/s2 through a 6 x 19 wire rope whose weight is 15,000 N. The diameter of the rope is 32 mm and the rope drum diameter is 960 mm. Take the Young’s modulus for the wire rope as 80 kN/mm2. Assume dw = 0.063 d. Which of the following is the bending load of the wire rope? Group of answer choices 61 kN 40 kN 4 kN 80 kN
To climb a 400 meter high mountain, you have two options, a straight line route with a 40 ° slope or a route composed of 5 equal sections (same length) each with a 20 ° slope. If traveling in a car with a mass of 1280 kg and a maximum power of 88 kW, Determine (assume the whole car as a particle): a) Is the friction enough to prevent the car from sliding? The coefficient of static friction of the tires with the ground is 0.95. b) What is the power required to climb the 40 ° slope at a constant speed of 40 km / h? Does the car have enough power to go up at that speed? c) What is the constant speed at which the 40 ° slope can be climbed with a 60 kW power? d) What is the power required to climb a 20 ° slope at 40 km/h? Does the car has enough power to go up at that speed? e) In which of the two trajectories does the car do more work? Ignore the resistance of the air and rolling resistance and radius of curves between sections of the compound route. Please add the free body diagram.
In the figure, m1 = 10kg and m2= 4.0 kg. the coefficient of static friction between m1 and the horizontal surface is 0.50 and the coefficient of kinetic friction is 0.30. a) id the system is set in motion with m2 moving downward, how much will be the acceleration of the system and the tension of the rope? g= 10m/s2
1. If there is no friction between shaft AB and the collar, what angular velocity θ˙˙ must the mechanism have to keep the collar at r=300 mm from the vertical axis? Express your answer to three significant figures. 2. Consider the same mechanism again, with m=2.95 kg, d=225 mm, k=250 N/m, only now, instead of being smooth, the collar and shaft have a maximum coefficient of friction of μs=0.297. What is the minimum angular velocity required to keep the collar at a constant distance r=300 mm from the axis of rotation? Express your answer to three significant figures.
If there is no friction between shaft AB and the collar, what angular velocity Ö must the mechanism have to keep the collar at r= 660 mm from the vertical axis? Consider the same mechanism again, with m = 3.3 kg, d = 275 mm, k = 180 N/m, only now, instead of being smooth, the collar and shaft have a maximumcoefficient of friction of 0.74. What is the minimum angular velocity required to keep the collar at a constant distance r= 660 mm from the axis of rotation?
Fred pushes a 55 kg refrigerator with a force P = 100 N inclined at 30° from the horizontal at 1.60 m from the floor as shown in the diagram. The coefficient of static friction between the floor and the refrigerator is 0.40.1. Which among the choices shows the limiting value of the frictional force between the refrigerator and the floor?A) 90.9 NB) 195.8 NC) 108.8 ND) 490 N2. Is the refrigerator not moving, moving, or on the verge of moving? Prove this through calculations.3) Write the correct moment equilibrium equation about A for the refrigerator. (Just use P, don't use P =100)
Q5 A pull of 20 N at 30 ° to the horizontal is necessary to move a block of wood on a horizontal table . If the coefficient of friction between the bodies in contact is 0.25 , what is the weight of the block ?
A 1800-kg truck travels at 85kph around a banked curve with a radius of 250 m. What should be the super-elevation so that the tire friction is equal in magnitude to superel-evation? A. 0.114 B. 0.295 C. 0.227 D. 0.382 E. None of the above
A box slides from rest from point A down a plane inclined 30 degrees to the horizontal. After reaching the bottom of the plane, the box moves on the horizontal floor at a distance of 2 m before coming to rest. If the coefficient of friction between the box and plane and between the box and floor is 0.40, what is the distance of point A from the intersection of the plane and the floor?
When a car brakes hard and skids, the maximum deceleration is 6 m/s2. The coefficient of friction between tires and road is _____.