PROBLEM 3: For a vertical rectangular gate, one side has linseed oil (0.938) and the other has two fluids-castor oil (0.96) and water. Considering a unit-width of the gate, apply the PRESSURE PRISM CONCEPT (Ilustrate and label the pressure diagram/prism) to calculate the magnitude and direction of the following when z = 7m. 1 m -hinge Linseed Oil (SG = 0.938) Castor Oil (SG = 0.96) 10 m 2 m 1water B

PROBLEM 3: For a vertical rectangular gate, one side has linseed oil (0.938) and the other has two fluids-castor oil (0.96) and water. Considering a unit-width of the gate, apply the PRESSURE PRISM CONCEPT (Ilustrate and label the pressure diagram/prism) to calculate the magnitude and direction of the following when z = 7m. 1 m -hinge Linseed Oil (SG = 0.938) Castor Oil (SG = 0.96) 10 m 2 m 1water B

Name: A. The hydrostatic force due to linseed oil F1.B. The hydrostatic forc
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: A. The hydrostatic force due to linseed oil F1.B. The hydrostatic force due to castor oil F2. C. The hydrostatic force due to water. D. The net hydrostatic force acting on the gate Fnet PROBLEM 3: For a vertical rectangular gate, one side has linseed

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter8: Centroids And Distributed Loads

Section: Chapter Questions

Problem 8.122P: The 12-ft wide quarter-circular gate AB is hinged at A. Determine the contact force between the gate...

See similar textbooks

Similar questions

One side of the container has a 03-m square door that is hinged at its top edge. If the container is filled with water, determine the smallest force F that must be applied to the bottom edge of the door to keep it closed.
Three types of fluids stack in an open tank as shown in the picture. If the specific gravidties are sg1=1, sg2=1, sg3=1, and h1=0 m, h2=0 m, h3=0 m, calculate the gage pressure at location 4, P4(gage)=_________(kPa)
What force, F, must be applied to the S-shaped gate to keep it closed? The gate is 1 m wide andthe radius of curvature of each part is 1 m. The liquid is water.
Find the capillary raise of the water in the tube of diameter 6mm, which is immersed vertically in the container. The surface tension of water is 0.07115 N/m. Take the angle of contact is = 00 The capillary raise of water in the tube is (unit in mm)= ______
A compressed air tank is designed to contain 50 standard cubic feet of air when filled to a gaugepressure of 200 atm at an ambient temperature of 70 F. Assume this is an air tank for scubadiving, and that the approximate shape of the tank is a cylinder with circular cross section. The interior volume of the tank is v=0.253 ft^3(a) If the interior length of the cylinder is 1 ft, what would be the inner diameter?(b) It is desired that the air tank be neutrally buoyant when empty. The density of aluminum is2700 kg/m3. If the tank is made of aluminum, what should be the wall thickness in order forit to be neutrally buoyant?
plzz help meeeeeeeeee The belt moves at a steady velocity V and skims the top of oil tank. Assuming a linear velocity profile in the oil, what is the required belt-drive power P (watt) (P= power = force x Velocity) if the belt moves at 3.5 m/s over oil with specific gravity of S=3.6 and oil viscosity of 0.004 m2/s. Belt geometry L= 2 m, b = 60 cm, and oil depth is h = 3 cm?
a drop of water has a diameter of 2.5 mm. What is the surface tension in air if the pressure within the droplet is 0.8 kpa
Determine the location of the total hydrostatic force from thr bottom surface and the top surface acting on the 2m x 4m gate shown on the illustration.
For a vertical rectangular gate, one side has linseed oil (0.938) and the other has two fluids—castor oil (0.96) and water. Considering a unit-width of the gate, apply the PRESSURE PRISM CONCEPT (Illustrate and label the pressure diagram/prism) to calculate the magnitude and direction of the following when z=20ft.
A tube with diameter of 0.3cm is inserted into water (Surface tension= 0.061N/m). The water in the tube rises to a height of 0.45cm from the surface. Calculate the contact angle between the water and the tube.
Compute the capillary rise of water between two concentric glass tubes of radius r 1 = 2mm, r 2 = 4 mm with a contactangle ϴ = 20ᵒ. Surface tension = 0.07321 N/ m.
Find the surface tension of the water droplet of 30 mm diameter when the inside pressure is 3.5 N/m2 The surface tension in N/m is