Q1: Calculate the dynamic viscosity of an oil, which is used for lubrication between a rectangular plate of size 0.75m x 0.55 m and an inclined plane with angle of inclination 45" as shown in figure 1. The weight of the rectangular plate is 0.5 kN and it slides down the inclined plane with a uniform velocity of 0.35 m/s. The thickness of oil film is 1.75 mm. Then, state the scope for this obtained viscosity? Rec anglar plabe -oil Inclined plane Figure 1

Q1: Calculate the dynamic viscosity of an oil, which is used for lubrication between a rectangular plate of size 0.75m x 0.55 m and an inclined plane with angle of inclination 45" as shown in figure 1. The weight of the rectangular plate is 0.5 kN and it slides down the inclined plane with a uniform velocity of 0.35 m/s. The thickness of oil film is 1.75 mm. Then, state the scope for this obtained viscosity? Rec anglar plabe -oil Inclined plane Figure 1

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A body weighing 77 lb with a flat surface area of 8 ft2 slides down a lubricated inclined plane making a 350 angle with the horizontal. For viscosity of 0.002089 lb-s/ft2 and a body speed of 6 ft/s, determine the lubricant film thickness in inches
Convert 15.14 poises to kinematic viscosity in m^2/s units if the liquid has a specific gravity of 0.964.
1. Two indefinitely long flat plates separated by 3 inches in distance but with a thickness of 5 inches each carry alcohol (5 m/s, 1 Pa·s, S.G. 0.89 (ref. water at 4 degrees Celsius) to a specific destination. Find out what the Reynolds Number is. 2. Calculate the dynamic and kinematic viscosities of water at 350 degrees Kelvin Note: Use perry's handbook for the value
What methods exist to calculate the viscosity of dense gases and liquids?
In between plates the oil thickness is 27 mm maintained and the top plate moves at 68 cm/s. Find the velocity gradient per sec. the velocity gradient in per sec
A plunger (54 mm Ø and 0.5 m long) is moving through a horizontal cylinder (60 mm Ø) containing oil at a speed of 8 m/sec that has a viscosity of 7.1x10-6 m2/sec and specific gravity of 0.84. Calculate the force needed to maintain its velocity. Use 2 decimal places.
C1 (a). A lubricating oil having the dynamic viscosity of 0.055 poise and kinematic viscosity of 0.17 stokes. Calculate (i) the density of oil in kg/m3, (ii) the weight density of oil in N/m3,(iii) the specific gravity, and (iv) the specific volume in m3/kg. C1 (b). Calculate the capillary effect in mm in a glass tube of 4.4 mm diameter, when immersed in (1) water (2) mercury. The values of surface tension in contact with air are 0.0737 N/m and 0.54 N/m respectively. The contact angle for water =00 and mercury =1300. (Enter only the values by referring to the unit given. Also, upload the handwritten answers in the link provided) C1(a).(i).The density of oil in kg/m3 C1(a). (ii) the weight density of oil in N/m3 C1(a). (iii) the specific gravity C1(a). (iv) the specific volume in m3/kg C1 (b). 1.The capillary effect (water) in mm C1 (b). 2.The capillary effect (mercury) in mm
A plate weighing 150 N and measuring 0.8 m ×0.8 m just slides down on inclined plane over which an oil film of 1.2 mm thickness for an inclination of 30° and velocity of 0.2 m/s. Calculate the viscosity of oil.
A tape, of width w = 25.40 mm is to be coated on both sides with a lubricant by drawing in through narrow gap of length, L as depicted in Figure 2. Following below values are given:c = 0.300 mm, t = 0.381 mm, and L = 20.0 mm.The lubricant, of dynamic viscosity  = 1.0054 kg/m.s completelys fills the gap and the velocity distribution is asssumed to linear as shown in Figure 2. The maximum allowable force in tape is given as F = 30.04 N. Find the maximum allowable tape speed.
discuss the effect of temperature on the viscosity of the liquid
Falling Sphere Viscometer Given: Inner diameter of cylindrical tube = 0.03 m Diameter of sphere = 0.02 m Mass of sphere = 0.025 kg Mass of liquid = 0.08 kg Height of liquid = 0.14 m Distance travelled by the sphere in the liquid = 0.06 m Time of travel by the sphere in the liquid = 95 s Calculate: The viscosity of the liquid in Pa – s. NOTE: Answer the situations with complete solutions. Write your final answer in two decimal places. Please input the correct unit. Thankyou
If the kinetic viscosity of a fluid is 6 stokes and specific gravity is 1.9, then dynamic viscosity of the fluid in poise is