pls answer the given Steam enters a turbine operating at steady state at 850°F and 450 lbf/in² and leaves as a saturated vapor at 1.0 lbf/in². The turbinedevelops 12,000 hp, and heat transfer from the turbine to the surroundings occurs at a rate of 2 x 106 Btu/h. Neglect kinetic andpotential energy changes from inlet to exit.Determine the exit temperature, in °F, and the volumetric flow rate of the steam at the inlet, in ft3/s.Step 1Determine the exit temperature, in °F.T₂ = i°F.

Answered: Image /qna-images/answer/cff48fc8-fe50-4728-8591-111151b75af7.jpg

Steam enters a turbine operating at steady state at 850°F and 450 lbf/in² and leaves as a saturated vapor at 1.0 lbf/in². The turbine develops 12,000 hp, and heat transfer from the turbine to the surroundings occurs at a rate of 2 x 10° Btu/h. Neglect kinetic and potential energy changes from inlet to exit. Determine the exit temperature, in °F, and the volumetric flow rate of the steam at the inlet, in ft3/s.

Steam enters a turbine operating at steady state at 850°F and 450 lbf/in² and leaves as a saturated vapor at 1.0 lbf/in². The turbine develops 12,000 hp, and heat transfer from the turbine to the surroundings occurs at a rate of 2 x 10° Btu/h. Neglect kinetic and potential energy changes from inlet to exit. Determine the exit temperature, in °F, and the volumetric flow rate of the steam at the inlet, in ft3/s.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Air enters a compressor operating at steady state at 14 lbf/in2, 60°F, with a volumetric flow rate of 7200 ft3/min. The compression occurs in two stages, with each stage being a polytropic process with n = 1.27. The air is cooled to 80°F between the stages by an intercooler operating at 45 lbf/in2. Air exits the compressor at 150 lbf/in2. 1. Determine the magnitude of the total power required by the compressor, in Btu/min. 2. Determine the magnitude of the total heat transfer rate for both compressor stages, in Btu/min. 3. Determine the magnitude of the heat transfer rate from the intercooler, in Btu/min.
Steam enters a turbine with a pressure of 80 bar, a temperature of 480°C, and a velocity of 145 m/s. Saturated vapor at 120°C exits with a velocity of 87 m/s. At steady state, the turbine develops work equal to 610 kJ per kg of steam flowing through the turbine. Heat transfer between the turbine and its surroundings occurs at an average outer surface temperature of 350 K. Determine the rate at which entropy is produced within the turbine per kg of steam flowing, in kJ/kg K. Neglect the change in potential energy between inlet and exit. Select one:a. 0.28b. 0.36c. 0.43d. 0.50
Water vapor enters a turbine operating at steady state at 1000F, 250 lbf/in2, with a volumetric flow rate of 25 ft3/s, and expands reversibly and adiabatically to 2 lbf/in2. Ignore kinetic and potential energy effects. Determine the mass flow rate, in lb/s, and the power developed by the turbine, in hp. Determine the mass flow rate, in lb/s, and the power developed by the turbine, in hp.
Steam with a quality of 0.71, pressure of 1.5 bar, and flow rate of 10 kg/s enters a steam separator operating at steady state. Saturated vapor at 1.5 bar exits the separator at state 2 at a rate of 6.9 kg/s while saturated liquid at 1.5 bar exits the separator at state 3.Neglecting kinetic and potential energy effects, determine the rate of heat transfer, in kW, for the steam separator.
6Air enters a compressor operating at steady state at 14 lbf/in2, 60°F, with a volumetric flow rate of 6800 ft3/min. The compression occurs in two stages, with each stage being a polytropic process with n = 1.27. The air is cooled to 80°F between the stages by an intercooler operating at 45 lbf/in2. Air exits the compressor at 150 lbf/in2. 1)Determine the magnitude of the total power required by the compressor, in Btu/min. 2)The heat rate transfer for the intercooler.
Energy Balance in an Open System Steam flows at steady state through a converging, insulated nozzle, 35 cm long and with an inlet diameter of 2.5 cm. At the nozzle entrance (state 1), the temperature and pressure are 250 °C and 1000 kPa, and the velocity is 20 m/s. At the nozzle exit (state 2), the steam temperature and pressure are 700 °C and 400 kPa. Property values are H1 = 2942.59 kJ/kg H2 = 3926.53 kJ/kg V1 = 0.23268 m3/kg V2 = 1.12147 m3/kg What is the velocity of the steam at the nozzle exit, and what is the exit diameter?
A turbine operating under steady-flow conditions receives steam at the following state: pressure, 13.8 bar; specific volume 0143 m3/kg, and velocity 30 m/s. The state of the steam leaving the turbine is as follows: pressure 0.35 bar, specific volume 4.37 m3/kg, and velocity 90 m/s. The difference in elevation is negligible. Heat is rejected to the surroundings at the rate of 0.25 kW, the turbine develops 103 kW of power and the rate of steam flow through the turbine is 0.5 kg/s. Calculate the change in internal energy of the steam
Refrigerant 134a at p1 = 30 lbf/in2, T1 = 40oF enters a compressor operating at steady state with a mass flow rate of 350 lb/h and exits as saturated vapor at p2 = 160 lbf/in2. Heat transfer occurs from the compressor to its surroundings, which are at T0 = 40oF. Changes in kinetic and potential energy can be ignored. The power input to the compressor is 3.5 hp. Determine the heat transfer rate for the compressor, in Btu/hr, and the entropy production rate for the compressor, in Btu/hr·oR.
Refrigerant 134a enters an air conditioner compressor at 4 bar, 20 degrees celsius, and is compressed at steady state to 12 bar, 80 degrees celsius. The volumetric flow rate of the refrigerant entering is 5m3/min. The work input to the compressor is 75 KJ per kg of refrigerant flowing. Neglecting kinetic and potential energy effects, determine the magnitude of the heat transfer rate from the compressor, in KW.
Refrigerant 134a enters a well-insulated nozzle at 200 lbf/in.2, 140°F, with a velocity of 120 ft/s and exits at 50 lbf/in.2 with a velocity of 1500 ft/s.For steady-state operation, and neglecting potential energy effects, determine the temperature, in °F, and the quality of the refrigerant at the exit.
Water vapor enters a turbine operating at steady state at 1000oF, 240 lbf/in2, with a volumetric flow rate of 25 ft3/s, and expands reversibly and adiabatically to 2 lbf/in2. Ignore kinetic and potential energy effects. Determine the mass flow rate, in lb/s, and the power developed by the turbine, in hp.
Steam enters a turbine operating at steady state with a mass flow of 10 kg/min, a specific enthalpy of 3100 kJ/kg, and a velocity of 30 m/s. At the exit, the specific enthalpy is 2300 kJ/kg and the velocity is 45 m/s. The elevation of the inlet is 3 m higher than at the exit. Heat transfer from the turbine to its surroundings occurs at a rate of 1.1 kJ per kg of steam flowing. Let g = 9.81 m/s2. Determine the power developed by the turbine, in kW.