Which of the satements below is/are limitations of Dumas Method? i. The Ideal condition is just an assumption for the vapor of the volatile sample ii. The sample must be a volatile liquid with a boiling point above 25°C and below 100°C using similar method iii. Possibility of having Impurities may not cause discrepancies of the result only i and i are the limitations only i is the limitation All are Method's limitation only i and ii are the limitations

Which of the satements below is/are limitations of Dumas Method? i. The Ideal condition is just an assumption for the vapor of the volatile sample ii. The sample must be a volatile liquid with a boiling point above 25°C and below 100°C using similar method iii. Possibility of having Impurities may not cause discrepancies of the result only i and i are the limitations only i is the limitation All are Method's limitation only i and ii are the limitations

Macroscale and Microscale Organic Experiments

7th Edition

ISBN:9781305577190

Author:Kenneth L. Williamson, Katherine M. Masters

Publisher:Kenneth L. Williamson, Katherine M. Masters

Chapter5: Distillation

Section: Chapter Questions

Problem 4Q

See similar textbooks

Similar questions

a.) A 12 kmol liquid mixture with XSi = 0.8, xca = 0.2 at 1500oC was cooled to 1030oC. Determine the amount of liquid and pure solid Si that are in equilibrium with each other. b.) Suppose the mixture in (a) is cooled further to 900oC. how many kg of CaSi2 is formed? (Molar weights: Ca – 40 g/mol, Si – 28 g/mol) c.)At xSi = 0.694 and T = 1030oC, is the system solid, liquid, or both?
A chart is prepared by plotting In Ksp versus 1/T, using data obtained by performing a lab experiment. Refer to the attached photo for reference on how to solve these equations. Particularly #5 should be useful: A linear fit of the data in the chart yields the equation y = (-5.0020x10^3)x+(2.100x10^1) with an R2 value of 0.9922. Determine the enthalpy (deltaH in kJ) associated with dissolving KNO3. Answer in scientific notation with appropriate sigfigs.
a. What is the chemical formula of the solid represented by the vertical phase boundary passing through point g? (Hint: use mole fractions of A and B) b. Suppose we have a solid mixture represented by point k. How much of the solid in letter a is in equilibrium per kg of pure B? Given the Txy diagram below of a two-component (A and B) solid-liquid system.
A solution of common salt in water is prepared by adding 50kg of salt to 200kg of water tomake a liquid density of 1250kg/m3. Calculate the concentration of salt in this solution as a: i) Weight(w/w)fraction (Ans: weight fraction 20%)
3. Refer to the phase diagram depicted below: When 7 moles of A and 3 moles of B are mixed at 50oC which is then cooled to 10oC the sample turns into two liquid phases, phase I has mole fraction xB=0.14 (see diagram below). Find the phase II mole fraction xB, and then calculate the ratio of amount of substance in phase I to that in phase II using Lever rule. Please enter your answer as a number with two decimals. for example, if the ratio you calculated is 2:3, you enter as 0.67
For a given liquid a plot of the lnP versus 1/T gives a straight line with a slope of -2829 K.What is the ΔHvap of this liquid? Your answer should be in kJ/mol and have 3 sig figs
Polycarbonate, PC, is used for aircraft canopies. A batch of this polymer was found to fail prematurely when impacted by a 4 pound bird during qualification studies. You suspect that the problem is due to a molecular weight difference for this particular batch of polymer compared to previous batches. You decide to perform dilute solution viscosity studies to determine the Mol.wt. Assume density is 1.2g/cm3 What solvent would you use? Justify your answer Please answer very soon will give rating surely
non idealities in liquid mixtures 1) which non-ovalent force is responsible for most of the non-idealities in liquid mixtures? 2) if a binary liquid mixture exhibits a positive deviation from rault's law, what are the possible values of the acivity coefficients of the two components? 3)are the following mixtures expected to be non ideal or ideal? i) cyclohexane and cycloctane ii) isopropanol and water iii)chloroform and acetone iiii) benzene and toluene
Determine the following from the Txy diagram of a two-component (A and B) solid-liquid system: Composition of the eutectic mixture Consider a mixture with overall B composition of 0.57. What is the ratio of the amount of solid containing 0.67 B and 0.33 A to the amount of the eutectic mixture at the eutectic temperature? What is the chemical formula of the solid represented by the vertical phase boundary passing through point g? (Hint: use mole fractions of A and B to answer this)
Pressure was exerted with a piston on molten naphthalene at 95 °C. The vaporpressure of naphthalene when the applied pressure is 1.0 bar is 2.0 kPa. What is thevapor pressure when the pressure on the liquid is 15 MPa? The mass density ofnaphthalene at this temperature is 1.16 g cm-1.
A liquid mixture of 50% mole n-butane and 50% mole n-pentane at 60oC and brought to a total pressure of 2600 mm Hg. At equilibrium, find the composition of both the liquid and vapor phases. What fraction of the original liquid was vaporized? If the mixture is heated further to 80°C what is the resulting pressure?
A student prepared a solution by mixing two pure liquids with the same mass, chloroform (MW = 119.4 g/mol) and liquid A (MW = 65.3 g/mol). The total vapor pressure of the resulting solution was measured to be 12.69 kPa at 25oC. Given that the vapor pressure of pure chloroform at 25oC is 25.9 kPa, calculate the vapor pressure (in kPa) of pure liquid A at 25oC. (Assuming the mixture solution behaves ideally.) (Input your answer with 3 significant figures. No need to input any units.)