Two parallel three-phase loads are connected to a three-phase a connected source through a line. The line voltage VAB at the two loads is 200430 degrees V. One load is configured in Y and absorbs three-phase real power 40KW with a 0.9 leading power factor, and the other load is configured in A with za = 12 + j152 per phase. Please calculate a) The line currents b) The power factor at the combined load c) The phase currents in the a connected load

Two parallel three-phase loads are connected to a three-phase a connected source through a line. The line voltage VAB at the two loads is 200430 degrees V. One load is configured in Y and absorbs three-phase real power 40KW with a 0.9 leading power factor, and the other load is configured in A with za = 12 + j152 per phase. Please calculate a) The line currents b) The power factor at the combined load c) The phase currents in the a connected load

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter2: Fundamentals

Section: Chapter Questions

Problem 2.44P: Two balanced three-phase loads that are connected in parallel are fed by a three-phase line having a...

See similar textbooks

Similar questions

A three-phase line, which has an impedance of (2+j4) per phase, feeds two balanced three-phase loads that are connected in parallel. One of the loads is Y-connected with an impedance of (30+j40) per phase, and the other is -connected with an impedance of (60j45) per phase. The line is energized at the sending end from a 60-Hz, three-phase, balanced voltage source of 1203V (rms. line-to-line). Determine (a) the current, real power. and reactive power delivered by the sending-end source: (b) the line-to-line voltage at the load: (C) the current per phase in each load: and (d) the total three-phase real and reactive powers absorbed by each load and by the line. Check that the total three- phase complex power delivered by the source equals the total three-phase power absorbed by the line and loads.
The three-phase source line-to-neutral voltages are given by Ean=100,Ebh=10+240, and Ecn=10240volts. Is the source balanced? (a) Yes (b) No
A balanced -connected impedance load with (12+j9) per phase is supplied by a balanced three-phase 60-Hz,208-V source, (a) Calculate the line current, the total real and reactive power absorbed by the load, the load power factor, and the apparent load power, (b) Sketch a phasor diagram showing the line currents, the line-to-line source voltages, and the -load currents. Use Vab as the reference.
A three-phase line with an impedance of (0.2+j1.0)/ phase feeds three balanced three-phase loads connected in parallel. Load 1: Absorbs a total of 150 kW and 120 kvar. Load 2: Delta connected with an impedance of (150j48)/phase. Load 3: 120 kVA at 0.6 PF leading. If the line-to-neutral voltage at the load end of the line is 2000 v (rms), determine the magnitude of the line-to-line voltage at the source end of the line.
The one-line diagram of a three-phase power system is as shown in the figure attached. Impedances are marked in per unit on a 100-MVA, 400-kv base. The load at bus 2 is S(sub 2) = 15.93 MW - j33.4 Mvar, and bus 3 is S(sub 3) = 77MW + j14 Mvar. I tis required to hold the voltage at bus 3 at 400 angle 0 degrees kV. Working in per unit, determine the voltage at buses 2 and 1.
Can you please solve the d e f parts? Three symmetrical three-phase loads are connected in parallel. Load 1 is connected in Y with an impedance of 400 + j300Ω / φ, load 2 is connected in with with an impedance of 2400 - j1800Ω / φ and load 3 is evaluated at 172.8 + j2203.2 kVA. Loads are supplied from a distribution line with an impedance of 2 + j16Ω / φ. Size of the voltage between the line and the neutral conductor at the end of the charge the line is 24√3 kV. The operating frequency is 50 Hz.(a) Calculate the line currents and the phase currents of the loads.(b) Calculate the total complex power at the receiving end of the system.(c) Calculate the total complex power at the transmitting end of the line.(d) Calculate the values of the compensation capacitors which are connected from the line to the neuron at the load end of the system so that the power factor at the load end reaches pf ≥ 0.98.(e) What if the capacitors are connected from one line to another? What would be the best…
A balanced delta connected load of 13+j16 ohm per phase is connected at the end of a three-phase line. The line impedance is 2+j11 ohm- per phase. The line is supplied from a three-phase source with a line-to-line voltage of 207.85 Vrms. Taking phase "a" voltage Va as reference, determine the following: (a) Current in phase a. (b) Total complex power supplied from the source. (c) Magnitude of the line-to-line voltage at the load terminal.
A balanced three-phase source with grounded neutral has line-to-neutral voltages of 132.7906 volts with an-bn-cn sequence. This source has an internal series impedance of 0.2+j2.5 ohms per phase. It supplies power to an unbalanced three-phase wye, neutral grounded, load with impedances: Zan = 18-j10; Zbn = 15+j25; Zcn = 20+j30 ohms. If line a is open creating a series fault at line load-side, what is the magnitude of the line current in line b in amperes?
A balanced three-phase source with grounded neutral has line-to-neutral voltages of 120 volts with an-bn-cn sequence. This source has an internal series impedance of 0.1+j1.5 ohms per phase. It supplies power to an unbalanced three-phase wye, neutral grounded, load with impedances: Zan = 40+j30; Zbn = 36-j15; Zcn = 18+j24 ohms. If there is a single-line-to-ground fault at line a load-side, what is the magnitude of the fault current in amperes?
Having a phase impedance of 23.7 + j17.1 Ω at 50 Hz given in Figure Δ-connected load, Y-joint source resulting in 400 V and 50 Hz with impedance 0.1 + j0.3 Ω on each line fed by. According to this, a) Find the line flow and load voltage. b) Find the load-arm currents. c) There are active and protective forces produced by the source.
A balanced three-phase source with grounded neutral has line-to-neutral voltages of 132.7906 volts with an-bn-cn sequence. This source has an internal series impedance of 0.2+j2.5 ohms per phase. It supplies power to an unbalanced three-phase wye, neutral grounded, load with impedances: Zan = 18-j10; Zbn = 15+j25; Zcn = 20+j30 ohms. If there is a line-to-line fault at lines b and c load-side, what is the magnitude of the fault current in amperes?
A balanced three-phase source with grounded neutral has line-to-neutral voltages of 230 volts with an-bn-cn sequence. This source has an internal series impedance of 0.15+j2.0 ohms per phase. It supplies power to an unbalanced three-phase wye, neutral grounded, load with impedances: Zan = 15+j20; Zbn = 20-j16; Zcn = 26+j10 ohms. If there is a three-phase fault at line load-side, what is the magnitude of the fault current in amperes?