venturiflame 0.8m wide throat is provided in a rectangular channel of 2m width.If the depth of water in the channel is 1m and the throat is 0.75m,find the quantity of water flowing through the venturiflume

venturiflame 0.8m wide throat is provided in a rectangular channel of 2m width.If the depth of water in the channel is 1m and the throat is 0.75m,find the quantity of water flowing through the venturiflume

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Related questions

Q: Calculate the water flow through a Parshall flume with a throat width of 5 feet and a water level of…

A: Reference : Fluid mechanics, Types of Open flow channel. Parshall flume is a device or fixed…

Q: Compute the lost pressure for a converging fitting. The flow rate in the 20 cm upstream section is…

Q: hydraulic jump occurs in a 5m wide rectangular channel carrying 6m³/s on an unknown slope. The depth…

Q: n a rectangular channel 2.5 feet wide with a discharge of 15 cfs and upstream depth of 6 inches,…

Q: A rectangular trough is 10ft long and 3 ft wide. Find how fast the surface rises, if the water flows…

A: Given data: rectangular trough dimensions 10×3 ft Discharge = 12 ft3/min

Q: Title At a given location in a 12-ft-wide rectangular channel the flowrate is 900 ft3 /s and the…

A: B=12 ft y1=4 ftQ=900 ft3FR1=vgy1=QB×ygy1=90012×49.81×4=2.993

Q: depth of water = 10 cm velocity of water = 6 meters/sec *The water flows in a rectangular-shaped…

A: Given rectangular channel Depth of water y1 = 0.1 m Velocity of water V1 = 6 m/sec Whether it is…

Q: rectangular open channel 6m wide has a depth of 1m of water flowing with a mean velocity of 0.75…

Q: Given the following parameters, give the required diameter of reinforced concrete pipe needed for…

Q: A rectangular channel 6m wide has a depth of 1m flowing with a mean velocity of 0.75m/s. Determine…

Q: A triangular channel with most efficient section discharges water at the rate of 1.90m^3/s Assuming…

Q: A circular gate 1.5m in diameter is inclined at an angle of 45°. Fresh water stands on one side of…

A: The given inclined gate is :

Q: An open channel having a slope of 0.0063 Is to carry 10 m3 /s. The channel material has an n value…

A: For most efficient triangular channel with given data it has been asked to find hydraulic mean…

Q: A 3ft-diameter semicircular channel have a flow rate of 90 ft3 /s when the channel is full,…

Q: The hydraulic conductivity of soil is 0.003cm/s. Water flows from reservoir A to reservoir B through…

A: Given data: Permeability (k) = 0.003 cm/s Seepage length (L) = 80 m Change in water elevation(…

Q: A drainage canal in the shape of trapezoid with a bottom width of 2.3m and a side slope of 1…

A: B=2.3m y=2.8m To find area of canal

Q: A cast iron rectangular channel under uniform-flow conditions has a bottom width of 7 feet, the…

A: Given: For uniform flow condition, Width of rectangular channel = 7 ftFlow rate = 75 ft3/sBottom…

Q: Water is flowing at a depth of 5 ft with a velocity of 4 ft/s in a triangular channel with…

A: Given :Triangular channel,y = Depth of flow = 5 ftv = Velocity of flow = 4 ft/sn1 = Side slope =…

Q: Draw a sketch of a trapezoidal channel cross-section, indicating the relevant geometric parameters…

A: Consider a trapezoidal channel with base width B, Depth D, slope z and flow discharge Q. Cross…

Q: A water pie gradually changes from 150mm ata point x to 450mm at point y. Point x is 5m below point…

Q: Review Water flows at 25 ft³/s in the channel, which is originally 6 ft wide and then gradually…

Q: Need asap. Please input the right formulation and solution. Provide explanation thank you. Answer on…

Q: An irrigation canal with trapezoidal cross-section has the following elements: bottom width = 1.00…

A: Given: Bottom width = 1 m Depth of water = 0.5 m Side slope = 1.5H:1V Slope of canal bed = 0.001…

Q: Determine the discharge through a trapezoidal channel of width of 8 m and side slopes of 1…

Q: 1.Water flows through a rectangular sharp-crested weir with a channel width of 2 m. The channel…

A: The given data is: Width of channel, B=2 m Channel depth, P=1 m (Height of weir plate) Head of…

Q: weir installed at the end of a rectangular channel controls the flow of water. The rate of flow is…

A: To find percentage error in discharge measured

Q: A rectangular channel of width 550 mm has a discharge of 0.1 m3/s and a uniform flow depth of 250…

A: Width=550mm Depth=250mm C=55

Q: A dam spillway is to be designed as a combination of a circle-quadrant and rectangular cross-…

A: Introduction : At the top of the reservoir pool is a spillway. Bottom outlets with valves or gates…

Q: The cross section through a concrete dam spillway, including a cut-off sheet pile wall and the…

A: Hi, thank you for the question. As per our Honor code, we are allowed to attempt first three sub…

Q: Avoid truncation in the middle of solution. Thank you. Assume that a conduit has a diameter 12…

A: Q=VA

Q: A trapezoidal trough is 10ft long, 4 feet wide at the top. 2 feet wide at the bottom, and 2 feet…

A: The flow of water is not constant at any point in the channel the behavior of flow is uneven at…

Q: Water flows through a V-notch weir in a channel 2 m wide. The channel depth is 1 m with a weir head…

Q: representing the relation between the recorded discharge (Q) with the water levels (W.L.) . Use a…

A: Given:-a=7.50mgauge reading =1.05mQ=k[WL-a]b To find:-discharge

Q: well with a radius of 0.5m , completely penetrates an unconfined aquifer of thickness 50m and…

A: Given: The radius of the well is 0.5 m. The thickness of the aquifer is 50 m. The hydraulic…

Q: Find the rate of flow in m3/sec/m through the permeable soil layer. Given: H = 5.5 m, H1 = 2 m, h =…

A: Given values: Permeability of soil= 0.085 cm/s Soil layer thickness = 5.5 m Width of the soil layer…

Q: Water flows in the triangular steel channel at a velocity of 0.88 m/s with an angle at the vertex of…

A: The given data is: s=0.0014 n-0.014 vertex angle=55 degree

Q: Water is flowing uniformly in a finished-concrete channel of trapezoidal cross section with a bottom…

Q: Water flows through an almost level channel 3 m wide at a rate of 12 m³/s. The depth gradually…

A: Given- B=3mQ=12 m³/sY1=1mY2=1.10mL=5mChannel is leveled

Q: What is the hydraulic radius Rh of a water flow at a half depth in a circular channel with a…

Q: A hydraulic jump occurs in a rectangular channel having a discharge of 3.45 m3/s of water per meter…

A: We have relation for hydraulic jump condition in recatangular cahnnel…

Q: A 20 m wide rectangular channel carries 100 m³/s of water at 1.0 m depth before entering a jump.…

Q: Water flows in a trapezoidal channel having a bottom width of 15ft and side slopes of 1 vertical to…

Q: Design the economical section of a rectangular flume that will carry a discharge of 296 cu. ft. per…

A: Q=296 cu.ft/s n=0.043 Slope, S=10ft/2 mile =10ft/10560 ft=0.00095

Q: For the pipe networks shown, the flow of water from reservoir A to the junction is 0.035 cu.m.per…

A: The flow rate at A is 0.35 cumecs, Pipe Number Length of pipe in m Diameter of pipe in mm f…

Q: An elliptical culvert is 4.5 feet tall and 6.9 feet wide it is filled with water to a depth of 1.05…

A: Given: Elliptical culvert 4.5ft tall and 6.9 ft wide Water depth 1.05 ft.

Q: The water surface elevation at upstream section is 100m. The bed slope is 0.002 under uniform flow.…

A: It is given that the slope of channel is 0.002 = 2/1000, which means that there will be a drop of 2…

Q: Determine the normal depth (m) in a rectangular channel with flowing discharge of 90 m3/s, roughness…

Q: annel with total included angle of 80°, and a depth of 3 m if the discharge is 10.7 m^3/s. Determine…

Q: Please help. Show complete solution and avoid truncation. Thank you A hydraulic jump occurs in a…

Question

A venturiflame 0.8m wide throat is provided in a rectangular channel of 2m width.If the depth of water in the channel is 1m and the throat is 0.75m,find the quantity of water flowing through the venturiflume

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Similar questions

A rectangular open channel is 4m wide and has a discharge of 10 cu.m./s when the depth of flow is 2m. If the same material has been used for a trapezoidal open channel having the same wetted perimeter, what would be the most efficient discharge without changing the slope? Q = Blank 1 cubic meters/sec.
Determine the cross-section of the greatest hydraulic efficiency for a trapezoidal channel with side slope of 1 vertical to 2 horizontal if the design discharge is 10 m3 /s. The channel slope is 0.001 and Manning’s roughness factor is 0.020.
A rectangular channel is 4.0 m wide and 7.0 m deep, but it is filled with water up to only 6.0 m from the bottom. The channel walls are made of corrugated metal. Calculate the hydraulic diameter.
In a rectangular flume 1.5 m wide, water flowing at a depth of 30 cm jumps to a depth of 1.0m. Find the total discharge.
A rectangular channel is 4 m wide, and it reduces to 2 m through a hydraulic structure. Assuring the transition to be horizontal and the flow to be frictionless determine the water surface elevations upstream of the constriction when the specific energy at the constriction is 6 m. Assume choking occurs, hence critical flow equations are applicable. Note: Hand written solution is not allowed.
A rectangular open channel is 4m wide and has a discharge of 10 cu.m./s when the depth of flow is 2m. If the same material has been used for a trapezoidal open channel having the same wetted perimeter, what would be the most efficient discharge without changing the slope? a) Q = ______ cubic meters/sec.
Find the rate of flow in m3/sec/m through the permeable soil layer. Given: H = 5.5 m, H1 = 2 m, h = 3.5 m, S = 40 m, a = 17°, and k = 0.085 cm/sec.
The elevation difference between the water surfaces of reservoir A and reservoir B is 25 m. Point S represents the mid-length of the 500 m long pipe (i.e. 250 m). If the pipe diameter is 200 mm, velocity=2.2 m/s, roughness is 0.0025 mm and friction factor is 0.02 determine the highest elevation the pipe can reach (with respect to reservoir B) at the summit point (point S) without risking pipe cavitation.
Derive a general expression for the wetted perimeter P of a trapezoidal channel in terms of cross-sectional A, depth y and angle of side slope ∅. Prove that Rh = y/2 for the section to have the best hydraulic efficiency.
For a typical sand and gravel aquifer, estimate the one-year travel distance for water when the hydraulic gradient is 0.0003 m/m.
Horizontal rectangular channel (4 m) wide is carrying a discharge of 20 m3/s at a depth of 2.5 m. If the channel width is reduced linearly from 4 m to 3 m in length of 5 m, determine the flow depth at the location where the channel width is 3.5 m. Assume there are no losses in the contraction
If the water depth immediately upstream or downstream of a frictionless vertical moving cover in a rectangular channel is 0.3 m and the flow velocity is 6 m/s, what is the opposite depth in meters?